beneteau first 345 sailboatdata

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Mailport: Charley Morgan, Locker Safety, Fast Bottom Paint

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

The Tricked Out Tillerpilot

Resolving Common Steering Problems

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

In Search of the Snag-free Clew

The Cruising Sailor’s Argument for High-tech Fibers

Breaking Point: What Can Go Wrong With Your Yanmar?

Rudder Mods for Low-speed Docking

Using Heat to Bend PVC Pipe

Mildew-resistant Caulks for Boats

Can We Trust Plastic Boat Parts?

Repairing Molded Plastics

Mailport: Marine plywood, fuel additives, through bolt options, winch handle holders

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Resurrecting Slippery Boat Shoes

Shoe Goo’s Gift to Sailors

PS Advisor: Tank Monitor and Camera Mount Hacks

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

The Ultimate Guide to Caring for Clear Plastic

Preventing Mildew in Marine Fabrics

Gearing Up for Winter Sailing

• Sailboat Reviews

Beneteau First 345

Can a boat be all things to all people? Last year in Rhode Island, two sailors who had differing ideas about what a sailboat should be went shopping for one to go partners on. One was mainly interested in performance and wanted a speedy club racer with sufficient amenities for one or two couples.

The second, with a wife and small child, was looking for more of a cruising boat, one that was stiff and stable but with excellent accommodations below. They settled on a Beneteau First 345, and at the end of their first sailing season both were satisfied with their choice.

Beneteau is far and away the most successful sailboat builder in the world right now. Its closest rival is another French company, Jeanneau, and in the United States only Catalina and Hunter match the kind of mass market appeal that Beneteau has enjoyed during the last half-decade. With 30 models available and annual sales last year of more than $70 million, Beneteau clearly is doing something right. Prior to the slowdown of recent years, Beneteau was cranking out 5,000 boats annually, about 400 of which were built in the U.S.

The company was founded by Andre Benjamin Beneteau in 1884 in the Atlantic coast town of Croixde-Vie as a builder of wooden fishing boats. In the mid-60s at the instigation of Andre’s granddaughter, Annette Roux, the firm took its first tentative dip into recreational boating waters with a small yacht called, appropriately, the Halibut. By 1974, Beneteau had captured 11 percent of the French sailboat market, but it wasn’t until the mid- 1980s, when the strong U.S. dollar sent Americans searching overseas for bargains, that the company, along with other European builders, began making serious inroads into the U.S. sailboat market. Today, with Roux as chief executive officer, Beneteau exports 60 percent of its boats, primarily to the United States and Australia.

A favorable currency exchange may have initially attracted American buyers to French boats, but a blend of high style and performance gave them an increasing share of the market. Both Beneteau and Jeanneau had to overcome what Michael Lecholop, Beneteau’s U.S. vice president for sales, called a misperception about their quality created by the strong dollar.

The exchange, he said, made the boats appear to be much cheaper than they actually were. Eventually, Beneteau gained a reputation for producing a boat of reasonable quality at a reasonable price— with the added plus of performance. In 1987, Beneteau felt confident enough of its U.S. sales to build its own plant in Marion, South Carolina. The firm, which had sales of $22 million last year in this country, is third in the American market behind Catalina and Hunter. In terms of quality, Lecholop said Beneteau considers its competition to be Tartan and the now defunct Pearson.

The Beneteau First 345 was designed as a moderate displacement racer/cruiser, and much of its popularity has been because of its success in blending the two functions. In fact, it could be said that the First is a racing boat that contains a cruising interior. The architect is Jean Berret, a Frenchman noted for his cruising and racing designs (he designed the 1985 Admiral’s Cup winner, Phoenix, a Beneteau onetonner).

At 12,600 pounds displacement the 345 is not overbuilt by any means but still substantially heavier than, for example, the Farr 34 (8,176 lbs.) or the J/35 (10,000 lbs.). On the other hand, it’s significantly lighter than a full-keel 34-footer like the Mason 34 (14,020 lbs.) yet carries 690 square feet of sail compared to 602 square feet on the Mason.

The First has a PHRF rating of 120 in four of the largest national fleets (slightly higher in several other fleets), making it reasonably quick—faster by 20 seconds per mile than both the Tartan and Pearson 34, and faster than the Cal 34 and Catalina 34.

Within the Beneteau model line, the First series represents the performance-oriented designs, while the Evasion and the newer Oceanis are geared more for cruising. The fin keel and spade rudder of the 345, coupled with a shallow bottom, have minimal wetted surface. The keel comes in either a deep (6′ 4″) or shoal draft (4′ 10″) version. The boat is mastheadrigged and equipped with running backstays in addition to a permanent backstay, and carries as a norm a mainsail of 258 square feet (roughly) and a genoa of about 431 square feet. The running backstays apparently are necessary to help stabilize the tall stick when going to windward in heavy weather, but they will be a nuisance to the leisurely cruising couple.

The deck is clean and easy to move about, including the side decks leading forward. The cockpit is deep, roomy and protected by its coamings and wide side decks.

The First came with either a cruising or a racing package. In the racing version, the mast is a foot taller, a tiller replaces the wheel and the mainsheet traveler is positioned across the rear of the bridge deck rather than across the cabin top. Unless you are adamant about having a wheel, the racing version seems to make the most sense because of easier access to the traveler. The 345 was in production from 1984 until 1988. More than 500 were sold—all but about 20 built in France.

Construction

French-built boats once bore the reputation of good design-poor quality. The French, their American counterparts would say, lacked modern, temperature- controlled facilities and often turned out suspect laminates. We’re not sure what the old Beneteau facilities were like, but visitors to their newer plants tell a different story. Jono Billings of Jamestown Boat Yard in Rhode Island, an authorized Beneteau repair yard, called the South Carolina plant “the most modern I’ve seen. It’s clean, there’s very little smell and it’s really well organized.”

Jono Billings’ repair work raises another issue about Beneteaus—their reputation for hull blistering. He said that one series of boats was made with a defective catalyst that resulted in a high rate of blistering. The company won a lawsuit against the resin maker and offers free repairs on all affected boats. According to Benetau, the catalyst problem affected several models between 1983 and 1985.

According to our own survey, Beneteau’s overall conblistering record is high-average, about on a par with Pearson Yachts and C & C. The newer Beneteaus, that feature a blister barrier in the gelcoat, come with a limited 10-year warranty.

With six manufacturing plants, there’s no mistaking that a Beneteau is a mass-produced boat with all the signs—interior liners, molded-in berths, lots of veneer, etc. But the result is a surprisingly well constructed boat. Hulls are made of uncored reinforced fiberglass, laid up in alternating layers of chopped strand, omnidirectional mat and woven roving saturated with polyester resin. The hull is reinforced by interior stringers, structural bulkheads and by the interior fiberglass liner and pan.

Deck, cabin top and cockpit are a single glass molding, with built-in nonskid surfaces where appropriate. The deck is balsa-cored, and the 1985 model we looked at exhibited some exposed core material visible from within the chain locker that had been saturated with water, according to a recent marine survey. That trouble spot could herald further the deck delamination, the survey concluded.

The hull-deck joint is a standard inward flange arrangement fastened with 3M 5200 sealant and further strengthened by the aluminum toe rail, which is riveted to the hull. The boats, according to Lecholop, are rated for offshore work under Bureau Veritas standards, the French equivalent of Lloyd’s of London. Still, we prefer through-bolts to rivets; even if strength isn’t the issue, bolts greatly facilitate future repairs.

The Isomat spar is keel-stepped. The keel, which is cast iron rather than lead, is secured to the hull by means of a laminated plate integral with the hull. The keel bolts, visible in the shallow bilge, appeared to be rusty despite a coating of some flexible compound. The rudder is fiberglass with a stainless steel stock (here again, the surveyor found excessive moisture, indicating potential future problems).

One problem with foreign-made boats is that all components may not meet U.S. standards. On the 1985 boat, the surveyor, A.D. Robbins and Co. of Dover, New Hampshire, found that the gate valve shutoff fixtures for the galley sink drain and engine seawater intake apparently were not of marine-grade copper alloys and thus corrosion prone and subject to failure. All other fixtures were bronze or stainless steel and satisfactory.

Performance

On an early October Saturday, with a moderately strong southeasterly wind blowing, Godzilla (nee Witch of the Waves) moved smartly out of Narragansett Bay on a close reach toward Brenton Reef tower. Sail consisted of an unreefed main of undetermined French make and a 140-percent roller furling jib from Ulmer-Kolius. The 345 is powerful and fast, and easily cut through the waves and over a cross swell coming in from the Atlantic. According to on-board instruments, the boat was moving along at close to its 7.1-knot hull speed on the reach— about normal for the conditions, the owners said. Switching to a beat, in 18 knots apparent, the boat naturally slowed (here, the crew attached the running backstays). On a run back toward the bay, Godzilla sped along at close to seven knots.

With its fin keel and fairly light ballast, the 345 reacted to gusts but was easily controlled. The regular crew felt the helm was nicely balanced, but we detected a tendency to round up in gusts. Some owners responding to our questionnaire also cited annoying weather helm.

The spade rudder, while requiring some working, made for fast tacking and quick response to the tiller. The owner of a 1987 model with a cutter rig reported excellent heavy-weather performance under staysail and reefed main. With a sloop rig, the boat flattens out when reefed before 20 knots. We’ve heard conblistering flicting opinions about the shoal draft version’s pointing ability; based on our sail, the deep keel is closewinded.

The most common complaint in our questionnaires was the boat’s poor speed and maneuverability under power. “Strong helm to fight when under power,” wrote one, whose boat was powered by the standard Volvo 2002. “My only complaint is that under power the boat’s performance is marginal,” another said. The owners of Godzilla, which was powered by a 28-h.p. three-stroke Volvo 2003, had no such complaints. (Engine access from three sides, via the aft cabin and behind the companionway steps, is excellent.)

The cockpit is roomy and comfortable with sufficient freeboard and beam to keep things dry from whatever spray was sent up by the bow. The outboard sides of the coamings, over which the crew can hike out, are patterned with nonskid—a nice touch and “something you won’t find on a cruising boat,” said a racer in the crew.

Shrouds and lead blocks are inboard, allowing narrower sheeting angles. It is difficult, however, for the helmsman to reach the bridgedeck-mounted mainsheet traveler. Raise the jib, and you have a boat that’s best sailed by two.

Clearly the boat is better set up for racing than short-handed cruising. Jibs are trimmed on #43 Lewmar winches retrofitted with cheap rubber collars that serve as a form of self-tailing. In reality, the setup was cumbersome and difficult to release under load; replacing them with genuine self-tailing gear is a priority of the owners.

The interior of the 345 is neat, functional and roomy. The layout, in typical Euro-style, has an aft cabin, dual settees in the saloon and a surprisingly roomy double V-berth forward. The aft cabin, to starboard, is a little cramped vertically, especially the berth under the cockpit—okay for sleeping but not much else. (One couple mitigates this by sleeping athwartships.) Another owner found it the perfect enclosed playpen for his toddler. The 345 comes in a second configuration, with two tiny quarter cabins and the head forward of the main cabin. This version is favored by the charter trade, but the single aft cabin seems preferable for ordinary cruising.

Aft and to port is the head. Both owners liked the location for its privacy and convenience. Like most enclosed heads on a boat this size, the compartment is a little small and could use a grabrail. The head is equipped with a Brydon marine toilet, fitted with a Y-valve leading to a holding tank.

Gray water from the shower is led forward to a bilge sump behind the mast step. Fresh water was contained in two tanks under the settees, totaling about 100 gallons. Some boats have rigid tanks; Godzilla has a flexible, bladder-type tank that seemed in good condition. Its light weight is another concession to performance, and it won’t last as long as a quality rigid tank.

The L-shaped galley is forward of the head and equipped with a three-burner propane Electrolux stove. Refrigeration is an icebox. To starboard, there is a good-sized chart table, a bit cramped for head- room on the outboard side for anyone over 5′ 10″. The main saloon is spacious, the double settees comfortable (one reader praised the quality of French foam). The amidships table contains Beneteau’s trademark wine rack plus additional storage space in the legs; beneath it is another trademark—the small bilge cover that converts to a dustpan. Headroom is more than six feet. Storage is ample and inconspicuous throughout.

It’s almost impossible to find the inside of the hull because of the liner, the liberal use of teak veneer, and padding on the upper bulkheads and ceiling. The overall appearance is pleasant, not gaudy, and the padding is functional as well as aesthetic. Nevertheless, we’d hate to search for the source of a serious leak beneath all the interior decoration. In the original Benetau First series, the settees and bunks were covered in subdued fabrics—green in this instance; the newer First S-series have the unusual Philippe Starck interiors with dark wood bulkheads and lots of silver and stainless steel, which Lecholop said “you either hate or love, but you won’t forget.”

The forward V-berth cabin, apparently the sleeping spot of choice for most 345 owners, is spacious, comfortable and private. There’s a hanging closet to port, drawers to starboard and lots of natural light from a translucent hatch.

Natural lighting in the main cabin is supplied by side ports covered outside with a sporty, one-piece smoked Plexiglas panel. This is an inexpensive way to manufacture portlights, and it is stylish, but of course they cannot be made to open and the absence of frames often makes for an unfinished look. There is a double overhead sliding hatch that also serves as a spinnaker launching area. Several owners complained that the overhead fluorescent lighting is too dim.

Conclusions

Satisfied Beneteau 345 owners list style and performance as their motivation for selecting this model. They also refer to good value for the money. We’d have to agree on all points. You can get a Beneteau for under $50,000—in the low forties for an older model, which is somewhat more than a Hunter 34 but slightly less than a comparable Tartan. The boat sails exceptionally well, and the interior is pleasant and accommodating. It’s not a Swan or a Sabre, but it is a reasonably well-put-together production boat that sells for a fair price.

The boat’s strong point is definitely its performance. The deep narrow fin keel and spade rudder, plus shallow bilges, running backstays and flexible water tank make it unsuitable for long-term cruising. We worry too about the riveted toerail, maintenance on the iron keel and gate valves—all indicators of less than top quality construction.

RELATED ARTICLES MORE FROM AUTHOR

Attention Darrell Nicholson.

I am considering

LEAVE A REPLY Cancel reply

Log in to leave a comment

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Beneteau First 345

Beneteau First 345 is a 34 ′ 6 ″ / 10.5 m monohull sailboat designed by Berret-Racoupeau and built by Beneteau between 1985 and 1988.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Shallow draft: 5.2’. Tall Rig: I: 45.00’/13.72m J: 12.90’/3.93m P: 38.70’/11.80m E: 12.60’/3.84m SA (100%): 534.06 ft2/49.61 m2

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

First 345 - Beneteau / STW001556

The First 345 produced by the builder Beneteau and designed by Jean Berret, is a cabin cruiser for cruising/regatta, rigged Sloop

Technical data

cabin cruiser

cruising/regatta

volvo penta 28 cv

overall length

hull length

waterline length

standard draft

minimum draft

displacement

diesel tank

mast height

Accomodation layouts

standard version

DOCUMENTS: First 345

Sales brochure of the shipyard

Pdf in alta risoluzione con la brochure originale del cantiere navale

If you find some wrong or lacking data of this boat, you can propose an update.

Technical forum: first 345, note: you will be redirected to another website., support the ultimate sailboat database.

The contents on this website, which today you can simply consult and use, have been collected, organized and archived by people who worked and invested in this project with passion and dedication for many years.

Before proceeding to browse, support our archive with a small donation that will allow us to maintain and improve this project.

proceed, I will donate next time

To proceed, you need to sign-in

• Choose the kind of boat Big boats Motor boats Rubber boats Sailing boats Sailing multihull boats

Beneteau First 345

General Data

Shipbuilder:, see also: boats for sale.

• Beneteau FIRST 35S5
• Beneteau First 36.7
• beneteau first 36.7
• Beneteau First 34.7

Overall length:

Maximum beam:, displacement:, straightening:.

1983 Beneteau First 345

Report error

No gallery images

Boat Overview

Hull material, composite_material, boat length (loa), see all details, boat description.

Picture a marriage between the First 38 and the First 42, with all their qualities combined under the positive influence of the First 456, the First admiral of the range. Immediately you get the First 345, a superb 10.55m sailing boat, signed by Jean Berret.

Discover the Pro

Hide ads, help pay for servers & development and unlock Pro only features like, sharing, advanced dashboard, extra storage space & more!

Performance & Ratios

This boat can be found in Deep Draft and Shoal Draft.

Beneteau First 345

The Beneteau First 345 is a popular sailboat model that was first introduced in 1983. It was designed by Jean Berret and Phillipe Starck, and it quickly became known for its exceptional sailing performance and spacious interior. The Beneteau First 345 has a length of 34.5 feet and a beam of 11.4 feet, making it a comfortable and stable vessel for cruising or racing. It has a fin keel and a spade rudder, which allows for responsive handling and easy maneuverability.

Inside the cabin, the Beneteau First 345 features a spacious layout that can accommodate up to six people. The interior is finished with high-quality materials and includes a large saloon, a fully equipped galley, and two private cabins. The boat also has a spacious head with a shower and ample storage space throughout. With its winning combination of performance and comfort, the Beneteau First 345 remains a popular choice among sailors and continues to be a sought-after vessel on the used boat market.

LOA: 34.50 ft LWL: 29.17 ft Beam: 11.42 ft Draft: 6.20 ft Displacement: 10141.00 lbs Ballast: 4600.00 lbs Hull type: Fin w/spade rudder Hull construction: FG Rigging type: Masthead Sloop

Beneteau First 345 for sale in the last 12 months

Below you'll find the latest Beneteau First 345 listings for the last 12 months. We compare the listing price with boats listed in the past and the color coding indicates if the price is good (green = below the average listing price) or more on the expensive side (red = seller is asking more than the average listing price).

Beneteau First 345 listing prices over time

Listing details.

First 305 Beneteau

The first 305 beneteau is a 30.5ft masthead sloop designed by jean berret and built in fiberglass by beneteau since 1985..

The First 305 Beneteau is a light sailboat which is a reasonably good performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a day-boat. The fuel capacity is originally very small. There is a very short water supply range.

First 305 Beneteau for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data, other photos.

Modal Title

The content of your modal.

Personalize your sailboat data sheet

First 345 Shoal draft

Sailboat specifications.

• Last update: 15th March 2020

First 345's main features

First 345's main dimensions, first 345's rig and sails, first 345's performances, first 345's auxiliary engine, first 345's accommodations and layout.

Similar sailboats that may interest you:

• Oceanis 30.1
• Oceanis 34.1
• Oceanis 37.1
• Oceanis 40.1
• Oceanis 46.1
• Oceanis 51.1
• Oceanis Yacht 54
• Oceanis Yacht 60
• FIGARO BENETEAU 3
• Heritage Sailing Yacht
• Flyer 7 SUNdeck
• Flyer 7 SPACEdeck
• Flyer 8 SUNdeck
• Flyer 8 SPACEdeck
• Flyer 9 SUNdeck
• Flyer 9 SPACEdeck
• Antares 7 Fishing
• Antares 8 Fishing
• ANTARES 11 FLY
• Gran Turismo 32
• Gran Turismo 36
• Gran Turismo 41
• Gran Turismo 45
• Swift Trawler 35
• Swift trawler 41 Sedan
• Swift trawler 41 Fly
• Swift Trawler 48
• Grand Trawler 62
• Heritage Powerboats
• Future Owners
• Our History
• Our Architects and Designers
• Our philosophy
• Our Innovations
• Your way to ownership
• Event calendar
• Tests and Awards

• Description

The First 305 is equipped with complete fittings which, like all the Firsts, has benefitted from racing experience. Particular attention resulted in a choice of the best brands, on an intentionally clear but complete deck layout. 

Interior designer :  Jean BERRET

EXTERIOR DESIGN

INTERIOR DESIGN

Customer Care

Buying a BENETEAU doesn’t have to be a daunting task. We have teams of experts to guide you through the entire process – everything from sea trials, financing, and customization to after-sale commissioning, service, and maintenance. We are proud to have one of the largest, most highly-regarded dealer networks in the world. We’re ready to provide you with the assistance and expertise needed to launch you and your BENETEAU on a lifetime of happy, rewarding, and memorable voyages.

Other models in the range

Select your area and your language

• Chinese, Simplified