nordica 16 sailboat for sale

NORDICA 16 Detailed Review

If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of NORDICA 16. Built by Exe Fibercraft Ltd. (CAN) and designed by undefined, the boat was first built in 1975. It has a hull type of Double-ended with long keel and LOA is 4.72. Its sail area/displacement ratio 21.95. Its auxiliary power tank, manufactured by undefined, runs on undefined.

NORDICA 16 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about NORDICA 16 and decide if it is a fit for your boating needs.

Boat Information

Boat specifications, sail boat calculation, rig and sail specs, contributions, who builds nordica 16.

NORDICA 16 is built by Exe Fibercraft Ltd. (CAN).

When was NORDICA 16 first built?

NORDICA 16 was first built in 1975.

How long is NORDICA 16?

NORDICA 16 is 3.99 m in length.

What is mast height on NORDICA 16?

NORDICA 16 has a mast height of 5.49 m.

Member Boats at HarborMoor

Review of Nordica 16

Basic specs., sailing characteristics.

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Capsize Screening Formula (CSF)?

The capsize screening value for Nordica 16 is 2.53, indicating that this boat would not be accepted to participate in ocean races.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 5.0 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Nordica 16 is about 53 kg/cm, alternatively 301 lbs/inch. Meaning: if you load 53 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 301 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is Motion Comfort Ratio (MCR)?

What is L/B (Length Beam Ratio)?

What is Displacement Length Ratio?

What is SA/D (Sail Area Displacement ratio)?

Maintenance

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

We are always looking for new photos. If you can contribute with photos for Nordica 16 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

• Forum Listing
• Marketplace
• Advanced Search
• All Topics Sailing
• General Sailing Discussions
• SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more!

Danica 16 owners Unite!

• Add to quote

I'm looking to hunt down the other Danica 16 owners out there As they were built in Vancouver BC Canada I suspect most are still in BC I know of 3 personally of the 25 there were made Any others out there? A couple of us were thinking of having a rally  

Hi, I have been looking to buy a Danica 16, do you know of one for sale ? If I am lucky to get one I would be interested in meeting up with some owners. Steve.  

Hi there I have a danica I love! There was a guy selling one a few months back I'm emailing him to see if he still has it and wants to sell it I'll let you know  

Many Thanks  

Sorry Steve , the fellow got back to me but hes since decided to keep his Danica, best of luck  

Is there a seal or seem running the length of Danicas from bow to stern? Thank you.  

I think from the bottom of the keel it looks like there is, though I'd have to go check. It isn't evident anywhere else though Out of curiousity why do you ask? (the last post I did here was about 10 months ago!)  

Hi I looked at the photos I don't think splitting in half is a concern with most Danica/Nordicas THe metal strip is just a keel protector. Some Nordicas have them running the entire length of the keel front to back. I can see a few patches/repairs on the keel but with a well-used looking Danica like that one it's not entirely surprising and nice to know someone was paying attention and patching it up. I have a small section I did on mine too. On the ebay Danica I would be more concerned about these items: - The top of the rudder(cheeks I think they're called) look non original and like they're conventional plywood, also it looks like it's a little too big/tall. The tiller shouldn't flop down onto the back of the cockpit like that. -I would ask/check out the cabin sole. Somebody has added something to the cockpit floor around the bottom of the compression post. A common problem in both Nordicas and Danicas is soggy floatation foam. -THe top of the cabin looks oddly flecked with black..is the gellcoat worn through or cracking or is paint overspray, I can't tell -the bright work all needs to be done(some body painted it blue..ick!) I like doing this sort of thing on a little boat so no big deal, i had to do mine and it was quite pleasing. - Why is the motor mount facing sideways??? - What are the sails like? there's no mention of Sails? new sails for a Danica could run up to $1200-1500!!? - It was one of the models with the inboard outboard,(thus the cutaway rudder) the builder/designer Peter Hahn told me they made a few like that but it didn't work out to well with the 2 stroke outboards they had at the time, too smokey on the cabin, that's not a minus though, it could work well with an electric or 4 stroke though it's likely been glassed in - Nice trailer and many other good points too, pulpit and pushpit! Danicas are great boats, I really love mine!! It's on the Nordica 16 yahoo site in the Nutmeg or piracy photo folder I would ask a tonne of questions if i wasn't able to see it first hand Where are you located There's one for sale in Vancouver(where they were built...only 25 made!) ********Sailboat for sale - includes moorage - $3900 -  

Oh yes and how's the runnning rigging and blocks Replacing it all could cost a few bucks too!  

You can check out my Danica here if you want It's not quite as tricked out as the one on ebay Cute As A Bugs Ear And Salty Looking Too I paid 1300 with the trailer and a 50 lbs thrust minn Kota a couple of years ago Which I sold as I don't find they have enough oomph if you really need it. The sails were decent and I'm still using them. I did do a little fiberglass retabbing inside, brightwork, and I've made a new mast base, compression post and added a pulpit, oh and new trailer tires. I got a deal. The price on ebay would only be worth it if it had good sails. It's not in tip top shape which the price would seem to reflect You can see the one in Vancouver comes with a honda 2hp and the years moorage which is a pretty decent deal  

Yeah, I had some concerns too (but thanks for pointing out a lot more), plus I couldn't go see it before bidding (at a price I thought was too high), so I passed it up. But oh, she's a salty looking gal!  

They all are, those double looking ports are quite unique! I have seen a double port version . I suspect the wooden surrounds are an addition. The round ports on Danica's are a result of the builder getting a deal at an auction on opening bronze portlights and only appear on the later models. Some Danicas had built in galleys and heads if you can believe it! Ask the buyer if he'll take a lower buy it now (provided he provide more information(like sails , cabin sole etc) I hope I didn't rain on your parade at all, i was just trying to be helpful Where are you located? I'm assuming nowhere near Manitoba  

You are right - Los Angeles - a little bit of a commute for those weekend sails on the $3900 Danica with paid slip. I had actually checked out your Danica review and videos a while ago. Yar, har, har! Post some mar! Do you know if there were any Danicas built with double ports, galley, and head? My wife wants our boats to keep getting bigger, but I want to go smaller. You think with double ports, galley, and head I could trick her? Me: Honey, it's bigger than average. Her: That didn't work before. What makes you think it will work now? *SLAP* Oh, well.  

Ahh L.A. I used to tour down that way a lot with bands And yes I agree a long commute Why don't you look for a Cape Dory Typhoon? There a little rarer on the West Coast but there's more in the States and they have some amenities. Still trailerable too Yes I believe there were Danicas with double ports as well as with Galleys and with heads. Whether any one of them combined all these features I couldnt tell you. A Danica is really a camping boat as far as accomodations goes, but very stout and seaworthy for all that What are you sailing now?  

I have a Clipper Marine Crealock 23 Twin Keel that I'm trying to sell. I also have a Montgomery 8 sailing dinghy. I like transom hung rudders on rounded canoe sterns (so the Typhoon doesn't really appeal to me). For the near future, something small and easily trailerable is best. I don't want to pay a slip fee any more, and a trailer for my current boat would cost more than the boat is worth. I like a fairly full keel, so a Danica seems just right, just wish it was lapstrake. I really like the looks of that ebay one. It has a lot of potential.  

Windkiller, What are the biggest waves and strongest wind you have been in and how did your boat handle it?  

Rounded canoe stern isn't a priority, but I like a big, full keel transom rudder on a smaller full keel boat; a Vertue, Allegra, Flicka, Folkboat, or Contessa would be nice. They are pretty, but I worry about the internal rudder post and sleeve on boats like the Typhoon and Kittiwake.  

Sounds like you're having fun! Do you have a link to some pictures? As you know, I really like double enders and found this Bob Perry blog quite interesting: Sail Far Live Free - Sailboats, Sailing News, and Gear: Double Enders According to Perry (Guest Post by Bob Perry) You mentioned you talked with Peter Hahn. I was wondering how he made the Danica. I assume he made a mold from a Nordica and altered it slightly. Do you know what he did with the Danica molds?  

Yes, I'm considering a Nordica 16/20, Halman 20, and Skipper 20 - embarrassing, but I like the Guppy 13 too!  

If you go to this wooden boat forum thread and scroll down to the 10th, 11th or 12th posting there's a picture: George Holmes' Eel comes out of the shed at Iron Wharf, Faversham If you send your email I'll send you a few more. That was an interesting article. I think I've read something similar before. For me aesthetics are very important in a sailboat. Older traditional stylings are much more pleasing and double enders have a very lovely roundness to them. I'm just selling a Nordica 20 right now. It's a very cool boat but not as cute as my Danica and it requires a bigger trailer and truck to tow it. Not currently in my budget. I might use some of the money from the sale to get a new mainsail for the Danica (or I'll get a sailrite kit and save a few hundred sewing it myself) I heard tell Peter Hahn used a Nordica 16 as a mold. The Danicas keel is about 8 inches deeper as well as having a deeper forefoot, the combings are higher, as is the cabin and the cockpit is smaller because there's a lazarette. Don't tell my Danica but I kind of think the Nordica 16s are a little cooler looking, a little more sleek and rakish whilst the Danica looks a little like a duck. i also like the old knockabout style boats and almost anything with a gaff rigg. I've thought of putting a bowsprit on the Danica and with a new mast making it a gaff rig...or a tiny yawl with a sailboard mast and a little boomkin. I keep thinking about it and then tink...why make more holes in the boat it does pretty well as is.  

The Eel looks good. How does it sail? About a mold . . . I would think he used a Nordica to make a mold that he then used to layup the glass for the Danica hulls. How did he use a Nordica hull as a mold? Did he pull apart a Nordica and layup the glass inside of the Nordica's pieces? Is a Danica thus a little smaller than a Nordica; smaller by the width of the Nordica's glass and gelcoat? Or am I not understanding something? A bowsprit would look cool, but I would worry about maybe putting the center of effort too far forward and creating lee helm. I have a bowsprit on my boat and that's what it seemed to do, but a few weeks ago I was out in about 25 knots and managed to break off a metal bowsprit support when a gust yanked the jib pretty hard (also put a little rip in the mainsail). I couldn't reach the metal support's screws without tearing apart the inside of the boat and taking out the forward bulkhead, so I just put a stainless eye into the glass behind the sprit and stuck the forestay on it. Hope it works, and cures the leehelm. I've only been out in about 5 knots since and couldn't even tack very well, too slow, had to jibe sometimes.  

I think you're right about the molds . regardless either boat is just under 14' on deck not including the rudder so the 16' thing is a slight exaggeration. On the Nordica 16 site (which includes us Danica owners) There's a set of pictures of a Danica being made. THe Danica has some good weather helm (the Nordicas and Danicas are known for it)and if I did make a sprit it would be a short one. First I wanted a nice wooden sprit, Then I decided I wanted a retractable aluminum one with a furler jib(which would entail some interesting forestay adjusting??!!. Still haven't done it yet though. I have a furler unit from a Chrysler Mutineer I used to have. I used to use it, it's handy and tidy but you do get a fair amount of luff sag to leeward, Mostly I just use a downhaul to bring down the jib on the foredeck. With the Danica (because of the full keel) tacking in light winds it helps to let the jib backwind as you cross the wind to help push the boat around and then uncleat it and pull it over to the new side.  

I couldn't find any pictures of a Danica being made. Maybe I'm on the wrong site? Do you have a link to the picture page? Thanks again.  

• ?            
• 173.8K members

Top Contributors this Month

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Sailboats 16 Ft

Sailboats 16 Ft Boats for sale

ODAY DAYSAILER 16 FT.

Bethany Beach, Delaware

Model DAYSAILER 3

Category Daysailer Sailboats

Length 16.0

Posted Over 1 Month

ODAY DAYSAILER 3, 16 FT., 8 FT. COCKPIT, SWING KEEL, VERY GOOD CONDITION, EASY LOAD TRAILER, VERY GOOD CONDITION, BOAT IS LOCATED IN REHOBOTH BEACH, DE. SOLD AS IS, NO RETURNS, ANY QUESTIONS CALL 302-537-2141 OR 201-745-5934

1980 Gulfstar 50 ft Ketch

Miami, Florida

Make Gulfstar

Model 50 Ft Ketch

Category Sailboats

1980 Gulfstar 50 ft Ketch Vessel 1980 Gulfstar 50 Ketch - Grace Engine/Fuel Type: Single / diesel Hull Material: Fiberglass Located At: Riviera Beach City Marina, FL 33404 Slip: N54 Price: $225,000 Dimensions LOA: 50 ft Beam: 13 ft 10 in LWL: 39 ft 8 in Maximum Draft: 5 ft 10 in Bridge Clearance: 57 ft Displacement: 35000 lbs Ballast: 12000 lbs Headroom: 6 ft 6 in Engine Engine Power: 100 HP Engine Brand: Yanmar Year Built: 2007 Engine Model: 4JH3HTE Engine Type: Inboard Engine/Fuel Type: Diesel Engine Hours: Less than 500hrs Propeller: 3 blade AutoProp propeller, lubed 9/2016 Drive Type: Direct Drive Transmission: New ZF 25M 9/2016 Tanks Fresh Water Tanks: 1 Fiberglass 220 Gallons Fuel Tanks: 1 Fiberglass 70 Gallons Fuel Tanks: 1 Fiberglass 60 Gallons Holding Tanks: 1 Plastic 10 Gallons Accommodations Number of single berths: 6 Number of double berths: 2 Number of cabins: 3 Number of heads: 2 Seating Capacity: 16 Electronics Raymarine Radar Raymarine Chart Plotter w/Navionics chart card Simrad Depth Sounder Simrad Knot Meter Simrad Wind Indicator and Masthead Sitex GPS CPT Auto Pilot Uniden VHF Ritchie Binnacle Compass Digital TV Antenna Long Range Bullet Wifi Radio Antenna Electrical System Blue Sea 12 Volt DC and 120 Volt AC 2 Bus Panel PN 8086 GoPower 3000 Watt Pure Sine Wave Inverter GoPower Remote Panel for 3000 Watt Inverter GoPower 75 Amp Converter/Charger 1 Shore Power to Inverter Selector Switch 3 Odyssey PC1800-FT 225 AHR AGM batteries 2 100 Watt Folding Solar Panels 1 30 Amp Solar Controller 1 Remote Timer for Refrigeration Control DC LED Lighting Throughout w/dimmers DC LED Lighting in cabinets and lockers 2 50' 30 Amp 120 Volt shore cords 1 50 Amp 240 Volt AC to 2 30 Amp 120 Volt AC splitter All electrical systems re-wired 2015 Propane safety shut-off switch in galley Hull Solid GPR hull Awlgripped white 1999 Keel: Cut-away cruising keel Cruising Speed: 7 knots Maximum Speed: 11 knots Deck Equipment KiwiGrip Non-Skid Beige decks 2015 Ideal Vertical Windlass with Wildc

1997 BENETEAU OCEANIS CC 40 FT.

New Rochelle, New York

Make BENETEAU

Model OCEANIS CC 40 FT

Length 40.0

1997 BENETEAU OCEANIS CC 40 FT.Specs Designer: Groupe Finot - Armel Briand Keel: Bulb Hull Shape: Monohull Dimensions Beam: 12 ft 9 in LWL: 36 ft 9 in Maximum Draft: 5 ft 6 in Displacement: 18740 lbs Ballast: 5300 lbs Headroom: 6 ft 3 in Dry Weight: 18740 lbs Engines Total Power: 50 HP Engine 1: Engine Brand: Yanmar Year Built: 1997 Engine Model: Yanmar Engine Type: Inboard Engine/Fuel Type: Diesel Engine Power: 50 HP Perfect cruising boat Full cockpit enclosure 5 KW NextGen generator with sound shield (super quiet) 2 heads 2 air condition units Main / Forward and Aft Cabin New cockpit cushions Algae X fuel polisher Custom made bunk beds Xantrex Link Pro Battery Monitor Xantrex 40 Smart Battery Charger Fresh Water Tanks: (132 Gallons) Fuel Tanks: (53 Gallons) Flex O Fold Bronze folding prop Asymmetrical Spinnaker and Sock TV / Cd player Digital Fridge / Freezer Thermostat VacuFlush Toilet 35lbs. CQR and 33 Bruce anchors and rope chain Simpson Lawrence chain / rope windless 2 8D Gel Batteries and Separate Starting Battery Back up High Capacity Bilge Pump PHI /PSS Shaft Seal Accommodations Number of single berths: 6 Manufacturer Provided Description: The specification for the Oceanis 40CC: the design of an ideal long-distance cruising yacht for a couple, but with the capability of accommodating four or five people in the greatest comfort. Being on board a powerful, reliable boat that also has high performance is an essential part of the pleasure of cruising. The Oceanis 40CC's hull is remarkable for its long waterline, big volumes and efficient wing-bulb keel. As far as her construction is concerned, there are no compromises: the structural inner mounding, glued and laminated to the hull, distributes any stresses from the rigging and keel. This technology combines reliability and strength and also provides perfectly finished locker interiors that are easy to maintain. One of the principal advantages of a central cockpit is the incomparable safety derived from the height of the cockpit, which is surrounded on all sides. There is a step of the coaming on the Oceanis 40CC to make it easier to get up the two teak-covered bench seats in the cockpit. There is a wheel mounted pedestal in the middle of the cockpit. Genoa and mainsail halyards and the lines for the two furlers are brought back onto powerful stoppers that free the halyard winch, whenever necessary. All handling lines are to hand. The Oceanis 40CC's deck is totally logical, simple and efficient, with steps in the transom (standard bathing ladder), liferaft fixing point on aft coachroof, solid aluminum bulwark the full length of the hull, as well as an aluminum rubbing strake. The numerous opening hatches and Dorade vents are positioned in such a way so as not to impede movement on deck. The chainplates for the upper and lower shrouds, which are positioned right against the coachroof, also leave the side decks completely free for easy access to the foredeck for the sunbathing area and the electric windlass. In the interior, the warm atmosphere (cherry finish) on board the Oceanis 40CC is essential to a good quality of life on board. To starboard, the saloon table and the raised settees ensure a pleasant "sea view" from inside the boat. Opposite to port, is the navigation station: chart table with stowage, bookshelves, 16-function electrical control panel, and all the room you need for on-board electronics. In the forward cabin, your guests have a large double berth, hanging locker, many other lockers and an en suite head compartment. In the passageway to port, which runs alongside the large engine compartment, the Oceanis 40CC's galley has everything you would normally find in the best-equipped kitchens: freezer, refrigerator, double stainless steel sink with hot and cold pressurised water, three-burner gimballed stove and many cupboards and drawers. As for the master cabin, all the incomparable advantages of the centre cockpit in terms of comfort and space have been fully exploited: large double berth with access from both sides, vanity-desk with mirror and lockers, large hanging lockers and your own head compartment with WC and separate shower. The Oceanis 40CC is truly the product of in-depth study into the expectations of ocean-going leisure sailors. A successful marriage of classicism and modern technology. Equipment List Oceanis 40CC Specifications - Standard Equipment On Deck - Stainless steel stemhead fitting with 2 fairleads and roller. - Open stainless steel pulpit - Leroy Sommer 1000W electric windlass with up - down control - Self-bailing anchor well with twin opening hatches and eye bolt for mooring line - Bulwark surrounding the deck with teak cap - 8 anodized aluminum mooring cleats: 2 forward, 2 midships, 4 aft - Forestay chainplate with slats on the stemhead fitting - 2 chromed bronze lower shroud chainplate, 2 Beneteau streamlined chromed bronze shroud chainplates - Anodized aluminum identified fuel and water fillers - Stainless steel stanchions with two sets of covered stainless steel lifelines - Lateral opening lifelines - 4 teak handrails on coachroof - 4 dorade vents - Forward cockpit coaming for windscreen, rigid top or sprayhood - 2 genoa sheet tracks with adjustable cars - 2 genoa sheet turning blocks - Mainsheet track with adjustable car - 1 Lewmar 40C STO halyard and maneuvering winch - 4 Spinlock XL double stoppers for halyards and maneuvering lines - 2 Lewmar 48C STO genoa sheet winches - 1 Lewmar 40C STO mainsheet winch Center Cockpit - Hydraulic steering wheel pedestal mounted or on forward port cockpit bulkhead - Control panel on cockpit bench seat facade - Teak slatted cockpit benches - 1 winch handle box - 2 chromed bronze winch handles - 2 sidedeck lockers (one for propane bottle) - 2 lockers for mooring lines and fenders on transom - Fixing points on aft coachroof for liferaft - 2 - 18-12 S-S backstay chainplates - 2 - 18-12 S-S pushpit with 2 teak seats, closed by sheathed lifelines - Emergency tiller - Transom with teak slatted skirt - Teak slatted step in transom - Folding 18-12 S-S swim ladder with wooden steps - Cockpit shower -- Aluminum rubbing strake either side of hull Spars - Rigging - Keel stepped mast and anodized aluminum boom - Mast with main furling system - 2 sets of spreaders angled aft 10 degrees - Spinnaker pole - Partner fitting with articulated blocks for returning halyards to cockpit Standing Rigging - Stainless steel rigging: upper shrouds, lower shrouds, 2 backstays - Twin groove forestay with Profurl genoa furler - Lateral rigging with discontinuous rigging to first set of spreaders Running Rigging - 1 main halyard, 1 genoa halyard - 1 mainsheet with blocks, 2 genoa sheets - 1 maneuvering line for genoa furler - 1 line for furling main, 1 line for unfurling main - 1 boom halyard - Sails - Furling Dacron main - Furling Dacron genoa with UV protection strip Interior Accommodation - Cherry interior Companionway - 15 mm Altuglass sliding hatch - Twin wooden companionway doors - 2 cherry wood stained handrails - 4 molded wooden steps with anti-skid strip, on polyester engine cover - Hanging locker to starboard of companionway Salon Starboard - Nav. station - Chart table with chart stowage and molded wood fiddle - Bookshelves - Lockers - 12V, 16 functions hinged electrical panel - Hinged panel for onboard electronics - Large tool drawer - Drawers - Seat - Opening 15" x 8" porthole in coaming with curtain - Halogen lamp with independent switch - Red watch light Salon Area - Settee - Lockers along hull sides - Wood hull lining - Reading lights - Fixed 6'7" x 8" porthole with curtain - Vent To Starboard - Raised deck salon for panoramic visibility - Shaped settee with cushions with 5.5" thick, medium density foam and backrests - Salon table with stainless steel base - Lockers and cupboards along hull sides - Wood hull lining - Lockers underneath settee - Halogen lighting with independent switch - Fixed porthole 6'3" x 10" with curtain - Opening Plexiglas panel in coachroof 23" X 23" with curtain - Padded deckhead lining - Bookcase - bar Galley in Port Gangway - Antium work surface with molded wood fiddle - Twin rectangular S-S sinks - Chopping board over sink - Hot - cold water mixer tap - Foot pump for icebox discharge - Trash bin - 3 sliding vegetable baskets - S-S oven with 3 burner gimbaled stove and S-S protection bar - Cutlery drawer - 2 cupboards to port, lockers along the side of hull - Top loading 2 compartment freezer - fridge,with 12V evaporator - 2 opening portholes 15" x 8" in coaming with curtains - Lighting by halogen lamps with independent switches and fluorescent tube - Dust box Aft Owner's Cabin - Central double bed 6'7" x 4'11", 4.7" thick mattress - 2 symmetrical hanging lockers - Stowage space - lockers along side of hull to port and starboard - Lockers - Step either side of the bed for easy access - Vanity - desk with mirror - Wood hull lining - Padded deckhead lining - 2 opening portholes 15" x 8" in coaming with curtains - 1 opening porthole 15" x 8" in transom with curtain - 1 opening porthole in aft coaming 27" x 8" with curtain - 2 dorade type vents - Lighting from halogen lights with independent switches and reading lights Aft Owner's Cabin Head - Compartment molded in one piece to be waterproof and easy to clean - Marine toilet with polyester lid - Bathroom accessories - S-S wash basin with hot - cold water mixer tap - Mirror - Cupboards - lockers - Stall shower with hot - cold water mixer tap - Electric pump for used water - 2 opening portholes in coaming 15" x 8" - Halogen lamp with fluorescent tube Forward Owner's Cabin - 6'3" x 4'7" double bed, 4.7" thick mattress - Drawer and lockers beneath bed - Hanging locker - Wood hull lining - Padded deckhead lining - 1 opening porthole in coaming (23" x 18") with curtain - 1 opening porthole in coaming (13" x 7") with curtain - Halogen lamps with independent switches and reading lights - 1 dressing table with mirror and shelves Forward Head Compartment - One piece molded compartment for waterproofing and easy maintenance - Marine toilet with polyester lid - Bathroom accessories - Wash basin with hot - cold mixer tap - Shower - Mirror, cupboard - Electric pump for discharge of water - Opening porthole in coaming 23" x 18" - Fluorescent tube lighting Engine Compartment - Engine 50 hp diesel - Single lever engine control - Engine chassis integral with hull liner - Engine control panel in cockpit - Engine compartment insulated by lead foam - Space for generator in engine compartment - 53 gal. fuel tank - Fuel - water filter on fuel circuit - Stainless steel shaft protected by skeg - Triple bladed prop Electrical Circuit - 12V Electrical circuit - 2 - 125 amp batteries for service with circuit breaker - 1 - 95 amp engine battery with circuit breaker - 110V-220V 45 amp H battery charger - 12V 16 function Electrical panel with 12V plug - Options conduits - Overhead halogen lighting, reading lights and fluorescent tubes - Cockpit lighting - Navigation lights - Masthead light - Deck spot - 110V-220V shore power plug (specify when ordering) - Electrical panel 110V-220V (specify when ordering) - 4 - 110V-220V sockets (specify when ordering) Water Circuit - Manual bilge pump - Electric bilge pump - 132 gal. fresh water capacity in 2 rigid tanks with hull liner - Valves for tank selection - 11 gal. water heater run off engine and shore power - Pressurized fresh water unit with compression tank - 2 electric discharge pumps for showers Propane Circuit - Box for propane bottles (2 bottles) in side lockers with air vent (conforming to US regulations) - Circuit breaker Miscellaneous - Certificate of Individual Bureau Veritas approval - Maintenance kit - Owner's manual - Owner's briefcase. Oceanis 40CC Optional Equipment - Teak interior - Teak decks - Forward cockpit steering position - Lewmar electric 30EST maneuvering winch - Polyester coachroof dodger - Fixed davits - Engine driven refrigerator - Ardic heating with 3 outlets - Gennaker - Gennaker gear SAILBOAT IS LOCATED IN NEW ROCHELLE NY SAILBOAT IS ON LAND FOR WINTER STORAGE BUT IT CAN BE PUT IN THE WATER FOR POTENTIAL BUYER......

Cape Dory 28 ft. 1984

Houston, Texas

Make Cape Dory

Length 28.0

Cape Dory 28, 1984Length: 28'Engine/Fuel Type:Single / dieselKemah, TXHull Material: FiberglassUS$ $26,500 Designed by Carl Alberg, this Cape Dory 28' has handsome, traditional lines emphasized by a perfect blend of white fiberglass, teak trim and bronze ports. Her self tending club footed jib makes Karma easily sailed to windward, and her full keel provides balance in heavy weather. The tiller keeps you in tune with the wind, and, when moored, lifts out of the way for a more spacious cockpit. If you're looking to sail the bay, with a crew or on your own, this well maintained Cape Dory. New Refit in 2009: Repainted; rewired; new bowsprit;2014: New trans; engine repainted; new teak & holly sole2011: New air condition. New interior cushionsDodger Additional Specs, Equipment and Information:Boat Name Karma DimensionsLOA: 28 ft 2 inBeam: 8 ft 11 inLWL: 22 ft 2 inMinimum Draft: 4 ft 0 inDisplacement: 9000 lbsBallast: 3500 lbs EnginesTotal Power: Diesel Universial M18;15 HP Engine 1:Engine Brand: UniversalYear Built: 1984Engine Model: Model 18Engine Type: InboardEngine/Fuel Type: DieselPropeller:Drive Type: Direct DriveEngine Power: 15 HPNew shifting cables TanksFresh Water Tanks: 2 Plastic (30 Gallons)Fuel Tanks: 1 Aluminum (20 Gallons) Hull, Deck and Cockpittraditional Carl Alberg designed hull, a full keel with attached rudder and tiller steering. The hull is constructed of solid fiberglass laminate and the deck has a balsa core with fiberglass laminate overlay. Eight opening bronze ports and two deck hatches keep the interior cabin airy and cool. The white deck has tan non-skid, and is accented with a teak toe rail. Inside the toe rail is a double lifeline system with stainless steel stanchions, all connecting to a stainless steel bow rail and stern rail. The cabin house top has teak eye brows above the bronze ports, teak hand rails, teak tracks for the companionway sliding hatch and a teak dorade box for the cowl vent.The cockpit can easily accommodate four adults when underway. The mainsheet attaches aft of the cockpit and with the tiller stored up, the cockpit opens up for more guests. Interior Cabin LayoutFrom the cockpit, step down into the salon area. Behind the steps you'll find the galley stainless steel sink. To port is a propane stove; to starboard you'll find the built-in icebox.The salon has a port and starboard settee and dining table. The port settee opens to a double berth; behind is a pilot berth. The starboard settee is a single berth with a storage shelf behind. The dining table folds and can be stored up against the midships wall when not in use.Following the salon is the head to port and a hanging locker to starboard. At the bow is a traditional v-berth; two single berths or with the center filler piece, one double berth.Teak and holly sole throughout and accent high gloss bright work create a warm cozy atmosphere below decks. Rigging, Sails and CanvasSweet Pea is sloop rigged with a self tending club footed jib.Aluminum spars with 3/8" 1x19 Stainless Steel Standing RiggingLewmar #16 two speed winch, port and starboard in cockpitLewmar #6 winch, on cabin topMain Sail, in very good conditionSelf Tending Jib, original 1984 in good conditionLight Air Sail (relatively new in excellent condition)Roller furling gibwisker pole Navigation Equipment and ElectronicsautopilotDepth sounderMarine VHFFluid Damped Magnetic Compassmany extras Electrical SystemTwo 12 volt DC Lead Acid Batteries (Group 31) New 20152 Electrical Panel with 6 circuit breakers ea.Battery switchElectric bilge pumpWeems & Plath Auto Mac 2 Alternator ColtrollerWest Marine Battery Charger Status/Monitor Additional InventoryDanforth Anchor and CQR anchorMOB / Life SlingPropane Grill, attaches to sternStainless Steel Boarding LadderOutboard BracketDocklines and fendersBoat HookFire Extinguisher

The Nicest 42’ Aft-Cabin Cruising/Chartering Sailboats - Located in Costa Rica

Make Gulfstream

Model Aft Cabin

Category Cruiser Motorcycles

Length 42.0

The following is from when we had purchased her just two years ago. She is Literally, one of the Nicest 42’ Aft-Cabin GulfStream Blue Water Sailboats Ever Built and in Absolutely Excellent Condition ‘Beautiful & Spacious’, Loaded with Extras including ‘Central-Air Conditioning’ and Costa Rican Flagged. A Perfect Business Opportunity She’s Completely Renovated and Fully Equipped for Live Aboard, Tourist Business or for Comfortable and Safe Extended Cruising She is ‘Beautiful & Spacious’ Inside and Out including ‘Central-Air’ Costa Rican Flagged and offers a Perfect Business Opportunity New Exotic Wood Interior including over $75,000 in Upgrades and Electronics Sailing capabilities: Offshore Cruising and without limitations. This GulfStream-42 is in Excellent ‘Ready to Go’ Condition. She only needs someone to Appreciate and Enjoy Sailing with her. Please see attached pictures for details. She is Flagged and located in Costa Rica, Certified and All Taxed are Up to Date. We purchased this Beautiful Sailboat last year from a local sailor with 20-years of extensive offshore sailing experience but since we have had little time to enjoy her, we have decided to let her go to someone who would appreciate her as much as we have and has more time to enjoy a Lifetime of Wonderful Memories. BOAT DESCRIPTION: COMPLETELY UPGRADED AND FULLY EQUIPPED GulfStream-42 'Center-Cockpit' in Tip-Top Condition. Central Air-Conditioning, 6'8" Head Room with 2 private cabins, Two Full Bathrooms with Private Showers. Walk-through Aft Master Suite. Costa Rica Registered and Flagged. Title transferable through a Costa Rica Corporation. Perfect Income for Tourism. Boat is in overall excellent condition and well prepared for extended blue-water or costal excursions. Electricity is provided by both Shore Power, Solar and her onboard "4.5kw Northern Lights" generator. Interior/Cabin: Central Air-Conditioning provided throughout with a Comfortable and very roomy 'Walkthrough' Aft Cabin Stateroom with private head and shower, Forward V-birth with Private Head and Shower with lots of head room. Enjoy watching Movies or local Television Channels from her ‘Sharp 26" 720p HD LCD Television’. She sleeps 6 with lots of storage, Universal Gas Stove/Oven, fridge/freezer, very Spacious Cockpit, Newly Painted Bottom and Deck. General remarks: All New Navigation Electronics including the INTERPHASE (1,200') Forward Looking Sonar, Garmin 5208 8.4" 'Touch Screen' GPS, Garmin 18" HD Radar. She is an Excellent Sailor, Very Comfortable, Roomy, Extremely Strong and Well Built, Well Kept boat. Perfect for Chartering, Single Handling or as a Spacious Family Boat. Sails: 1992 and in very good condition. DETAILED SPECIFICATIONS Description GulfStream built many designs but this one's tough to beat as an outstanding cruising design. Her cutaway full keel and skeg-hung rudder offers uncompromising performance between comfort and stability. She's ready to store your provisions aboard, cast off her lines and make way for an Experience of a Lifetime. Dimensions LOA: 42/00 ft/in LWL: 33/00 ft/in Beam: 12/00 ft/in Maximum Draft: 4/10 ft/in Displacement: 22000 lbs Bridge Clearance: 56/00 ft/in Galley REFRIGERATION/FREEZER: Adler Barbour 2.8A@12vDC STOVE: Universal SS three-burner propane stove with oven (LPG) with GAS ALARM SINK: Single SS WATER SYSTEM: Pressure SEAWATER WASHDOWN WATERMAKER: New and Never Activated Powersurvivor-35 Accommodations A very spacious, cruise-friendly, Live Aboard interior lay-out! Provides Central Air-Conditioning throughout. The Aft Master Stateroom has a full-width KING-SIZE BED with Private head/shower. The Forward Stateroom has a roomy v-berth and storage in lockers, drawers and bins. The guest head is to port. The salon features a H-shaped dinette and a spacious L-shaped galley to port and an adjacent settee to starboard. The navigation stations is center and to starboard. Engine ENGINE: 50Hp Perkins-4107 diesel, completely overhauled 1998 HOURS: 150 hours since rebuild. New April, 2012 Heat Exchanger SPEED: Cruising Speed: 6mph / Maximum Speed: 8mph Electronics CHARTPLOTTER: New Garmin 5208/GSD22 FISH FINDER: Sounder/Fish-Finder BlueChart G2 2012 Garmin Vision VSA002R South America West Coast BlueChart G2 2012 Garmin Vision VUS031R Southwest Caribbean RADAR DOME: Garmin GMR 18 HD 18" Radar Dome DEPTH/TEMP: Garmin B60-12, 12 Degree Tilted Element Transducer VHF: Icom IC-M80 & Garmin VHF 200 Marine Radio HANDHELD Uniden MHS75 New Submersible Two-Way VHF Radio SONAR: 1,200' INTERPHASE COLOR TWINSCOPE FWD LOOKING SONAR STEREO: Dual MXD50 AM/FM/CD Marine Receiver AM/FM/CD WIND SPEED & DIRECTION: Horizon Standard AUTO PILOT: Alpha Marine Spectra "Top of the Line AP" KNOT METER/LOG: Horizon Standard COMPASS: Danforth Constellation (at helm) Electrical ELECTRICAL SYSTEM: 12vDC/120vAC AIR CONDITIONER: Mermaid 16,000btu Air Conditioner GENERATOR: 2008 Northern Lights Generator (710 hrs) BATTERIES: 3-marine deep cycle House Batteries - 2-Starter Batteries - Both New May, 2012) AMP HOURS: 100Ah each BATTERY PARALLEL SWITCH: (2) Yes BATTERY MONITOR: Sterling ProReg D Marine 12/24 Volt Advanced Regulator DOCKSIDE CABLE: 50' 30-amp INVERTER: Power Bright 1,500w (New May, 2012) INTERIOR LIGHTING: 12vDC ALTERNATOR: Powerline Series 25 - 120amp (+ Control) BATTERY CHARGER: Progressive Dynamics 40 AMP Marine Charger PD2140 OTHER: 1-250W Mono-Crystalline Solar Panel Mechanical Equipment PROPELLER: Three-blade bronze BILGE PUMPS: New April, 2012 (1) New Rule 3000 automatic RAW WATER SEA STRAINERS: New April, 2012 Bronze FIRE EXTINGUISHING: Manual dry chemical FUEL FILTERS: (1) Racor STEERING: Wheel, cable to quadrant FUEL SHUT OFFS: Diesel, LPG FRESH WATER COOLING: Yes ENGINE ROOM HEAT EXTRACTOR TRANSMISSION: Hydraulic Borgwarner MASTER TOILET: Thetford Tecma 'Silence Plus' Electric Toilet - (New) GUEST TOILET: Jabsco 'Manual' Toilet - Guest Bathroom (New) HOLDING TANK: None WIND VANE SELFSTEERING: None FIRE SAFE: (New) Sails & Rigging SAILS: 2-Main (extra as backup); 1-Genoa (Roller Furling); Spinnaker ROLLER FURLING: Hood 808-SL (New) TOTAL SAIL AREA: 691 sq. ft. MAST: Aluminum, keel-stepped STANDING RIGGING: SS wire (New) SPINNAKER POLE: (1) WINCHES: (2) Barlow-16 at the mast with Barlow-2 wire main halyard winch. Lewmar 48 2-speed and a single Barlow-16 winch. Deck & Ground Tackle ANCHORS: 45lb. Bruce; 45# CQR, 40lb Grapnel stern anchor TOE RAILS: FG LADDER: Folding SS and Plastic swim BOW PULPIT: SS ANCHOR WINDLESS: 'MAXWELL' (12vDC) ANCHOR TACKLE: Two Forward Compartments. Bay-1: 250' Grade-40 High Test Genuine ACCO Brand Windless Anchor Chain Bay-2: 90' Grade-40 HT ACCO Chain with 300' of 1" Rode DINGHY & MOTOR: 2009 9.5 Caribe-C9 10' Hard Bottom Inflatable with Evenrude 15-h.p. Outboard. Both serviced April, 2012 ANCHOR DAVIT/ROLLER: Double SS LIGHTS: Deck-mount Navigatin, Masthead Tricolor, Spreader COVERS & CURTAINS: Custom aluminum Bimini with full enclosure, cockpit and aft deck awnings LIFELINES & STANCHIONS: Double SS wire on SS stanchions DECK MATERIAL: FRP with integral nonskid BOARDING GATES: P&S Safety Equipment LifeSling Overboard Rescue System 7-Adult & 2-Children Life jackets Exclusions Owners' personal effects She's located in Costa Rica and Import as well as all other Taxes are Fully-Paid and Up-to-Date. FYI: Import Taxes in Costa Rica for Sailboats are 65% of their Book Value. We've Invested over $125,000 since owning her however,she could be yours today for only $109,000 Reasonable Offers Considered.

1979 Hunter 30 FT Sloop Priced to move

Dingmans Ferry, Pennsylvania

Make Hunter

Model 30 FT Sloop Priced To Move

1979 Hunter 30 FT Sloop Priced to move This is a 1979 Hunter 30FT Sloop powered with a 27 HP Yanmar 3 GM Diesel Engine! Designed by John Cherubini. Priced to move! SPECIFICATIONS: LOA: 30ftLWL: 25ft-9inBEAM: 10ft-1in DISPLACEMENT: 9700DRAFT: 5ft-2in BRIDGE CLEARANCE: 45ft- 6in BALLAST: 4100 LBS ENGINE: Yanmar 27hp Model: 3GM CRUISING SPEED: 6 MAX SPEED: 7 TANKAGE: Fuel: 12 Water: 30 ACCOMMODATIONS: Traditional layout with a good V-berth forward (V-berth cushions missing), full sized head with shower, hanging locker. In the Salon there are settee berths and a dinette that folds up to the bulkhead. There is an L shaped galley and quarter berth with a small chart table at its head. Headroom 6ft- 4inBeautiful woodwork throughout Ample stowage in drawers and lockers16,700BTU Ocean Breeze Marine AC with heat and Programmable ThermostatGalley with refrig. Box and stoveSwim ladderNice cushions including new cockpit cushionsTeak and Holly sole in SalonCockpit Bimini SAILS AND RIGGING: Standing Rigging 6 years oldRoller Furled JibMain Sail with coverNewer Jib sheetsUpgraded Safety LinesPedestal SteeringFixed Fin ballasted KeelNew complete bottom paintStorm Jib bagged insideLots of Boat related item spares and supplies ELECTRONICS: Two Ship to Shore Radios: ICOM IC-M602 VHF Radio with DSC, AND STANDARD HORIZON VHF RadioShip Compass *** BOAT LOCATED IN: Whitney, Texas (76692) ***

16 ft Capri sail boat and trailer

Montgomery, Texas

Model Day Sailer

Length 13.0

1987 Capri13 sailboat, sunshine yellow and white. Sail, rudder and removable keel. Very light boat, weighs 128 lbs. All in working order, sold as is, where is. Trailer is old looking and needs painting, but is functional with lights & license. Capri Sailboats was established in 1972 as a Californian-based builder of small to medium sized sailboats. Ideal for leisure sailing, Capri Sailboats offered fiberglass watercrafts only 8 feet in hull length. Operating under the Catalina Yachts company since formulation, the Capri Sailboats brand was disbanded after 1999.

Rebel 16 Mark II Sailboat with Aluminum Trailer

Angola, Indiana

Length 16.6'

Stable fiberglass sailing boat carries six people (or 1170 pounds). Includes trailer, full rigging, and TWO suits of sails. One suit of sails is in like new condition, the other set is in very good condition. Serial number 1929 (built in late sixties to early seventies I believe). The centerboard swings up into the cockpit, so you can change the depth to dock in shallow water. The rudder also swivels up if it hits an obstruction. The trolling motor in the photos is not included. There is, however a permanent motor mount on the stern. The boat will take up to a 5hp motor, but my 30lb. thrust trolling motor drives it around just fine. The boat is located on West Otter Lake, Angola, IN. Buyer with the selling price in cash or Pay Pal payment can drive it away. (Trailer takes an 1 7/8" ball hitch.) The following article from Sailing Magazine gives a great description of Rebel sailboats. You can access the original on SailingMagazine.net. Rebel 16 2008 January 8 By Staff This nimble and tough classic is perfect for a daysail or a day of racing This year the boat that holds claim to being America's first production fiberglass one-design will celebrate its 60th birthday. That the boat is still in production makes this milestone that much more remarkable. In 1948, fresh out of the Navy, Ray Greene began building a 16-foot family daysailer out of his Toledo, Ohio, shop using a revolutionary new material called fiberglass. The design of the boat was based on lines drawn by a local high school drawing instructor by the name of Alvin Younquist. With its wide, 6-foot, 7-inch beam and 110-pound steel centerboard the stable little boat known as the Rebel soon became a hit on the Midwest's inland lakes. And while Greene said he never intended to create a racer, thanks to the boat's performance-courtesy of a large 120-square-foot main and 46-square-foot jib on a fractional rig-it wasn't long before a competitive structure was built around the boat. By 1952 a class association had been firmly established and by 1963 the class boasted 138 active members. Not bad. Fleets started popping up across the Midwest, south into Kentucky and all the way down to Texas. Meanwhile, class members could be found sailing the inland lakes of the Eastern Seaboard from New York to Florida. After 25 years of building the Rebel, with more than 3,000 hulls produced, Greene was ready to call it quits and sold the works to a group of Chicago investors. Production of the Rebel continued at a steady pace during the 1970s, and was done under a number of names: Melling Tool Co., Rebel Industries and finally Spindrift One Designs. After Spindrift folded, the Rebel moved to Michigan in 1988 when Nickels Boat Works of Fenton took over with the production of the Mark V model. Nickels continues to build the Rebel, offering buyers a choice of a daysailer version for $9,860 or the optimum racing version for $11,872 less sails and trailer. A stainless steel centerboard now comes standard with the Rebel. Nickels also continues to be a great source for parts and accessories, as well as information, on the Rebel. One tough Rebel While there have been reports of problems with the foam flotation on older boats becoming waterlogged, that has been less of a problem on boats from the 1970s and later. Other than that, a buyer of a used Rebel should find few issues with the condition of this durable little boat. Indeed, boats 25 years and older will still top regatta leaderboards. "They're well made, very rugged boats that will last forever," said Al Vorel, National Rebel Association Commodore, who has been racing the same boat, No. 3914, for almost 20 years. "You don't have to run out every 5 to 10 years to buy a new boat." This is one of the reasons for the longevity of the class. Boats tend to stay in the family, passed down from parent to child, with the younger generations wanting to keep the racing going. "My mother races, and my daughter sometimes races, so there are times we'll have three generations on the course," Vorel said. This also, of course, keeps a lot of boats off the market, and finding a used Rebel can be a bit of a challenge. But thanks to the Internet, it's possible to locate a few sellers. Prices can vary from just under $1,000 for an older boat in need of some work to $3,000 or more for a later model. Buyers can typically expect to pay in the neighborhood of $1,500 for a pre-Nickels-era boat in good shape. We were fortunate enough to find a late 1970s Rebel listed for sale on www.craigslist.org. Better yet, the seller was within trailering distance. The offer on the boat was $1,400, so we drove out to take a look. The boat was well cared for, kept under a roof winters, and showed no structural damage. Other than some algae stains and scuff marks the finish looked good, and all the gear was there, including the main and jib, which the owner said he bought new about seven years ago. We did see some possible issues, including a rusty, pitted centerboard and a wooden rudder that looked to have some rotting. So we offered to pay the full $1,400 if the owner threw in the trailer, which he originally wanted an extra $200 for. The deal was closed and we drove off with the Rebel in tow. Rebel with a cause With the boat parked in our yard the first item of business we wanted to take care of was the rusty centerboard. Nickels offers a stainless steel replacement board, and we could picture how sweet the boat would look with a shiny new stainless fin. Unfortunately, these centerboards run close to $1,000; more than two-thirds the cost of the entire boat. So such an extravagant purchase didn't make much sense. Instead we set about rehabilitating the old board. We removed, with a bit of difficulty, the 110-pound board and set in on sawhorses. The first step was to remove the old paint using paint stripper, then power sanding. We then slathered on some Duro Naval Jelly to remove the rust, wiping down everything with paper towels then finishing up with a clean, acetone-soaked rag. Next, we filled in the pits and hollows with West Marine Surfacing Putty, and sanded everything smooth. We made certain the blade was fair by running a straight edge along the board. We also further faired the rounded leading edge of the board to within the class rule limits, which prohibit tapering less than 1/16th of an inch and more than one inch in from the leading edge. We then primed the board with several coats of Interlux Primocon primer, which when dried we wet sanded with 400-grit paper, and finished with a couple coats of Interlux VC-17m Extra bottom paint. With the centerboard done, we then turned to the rudder. An ice pick determined the wood was beginning to rot near the lower trailing edge. We probably could have rehabilitated the rudder as well, but since we had saved some money by not replacing the centerboard we decided to spring for a new rudder. We opted for a fiberglass blade, supplied by Nickels for $375. This cost covered just the blade, as the original aluminum rudder cheeks and hardware were still in good shape. While we were on the phone with Nickels, we decided to order all new running rigging to replace the weathered lines the boat came with. This included lines for the cunningham, boom vang, centerboard system, as well as sheets and halyards for both main and jib. The total for 112 feet of ¼-inch line and 105 feet of 5/16-inch line came to $100. Next we took a closer look at the standing rigging. The spars showed no defects, and with a bit of metal polish and elbow grease the rotating mast, boom and aluminum whisker pole looked good as new. The 1-by-9 stainless steel shrouds and forestay also showed no visible defects. We did, however, find the diamond stays on the mast to be tuned rather tight. According to the North Sail's One-Design tuning guide for the Rebel, an overly tight diamond can limit fore and aft mast bend, and can even cause negative pre-bend, where the mast bends forward at the tip. Since we want to have a competitive boat, we loosened the diamond tension and will readjust after doing some sea trials. As we said, we ultimately wanted to race our Rebel and didn't want a slow boat. So obviously the 7-year-old suit of sails had to go. This would be our biggest expense, and a new suit of sails would alone exceed the original cost of the boat. A new main and standard jib (a light air jib is also available) from North Sails set us back $1,615, which included $20 for class royalties but not shipping. Certainly this was a blow to our budget, but we rationalized it by thinking about the fun we would be having with some close racing come summer. Our last order of business was getting our bottom clean and smooth. We first scrubbed the hull down with a detergent then wet sanded everything below the rails to a slick surface with 1,200-grit paper. After a rinse and wipe down with the hose and clean towels we were satisfied we had a slick bottom. We finished off by treating all our hardware and moving bits to a little McLube Sailkote spray. We now have what we feel will be a contender on the course for our racing crew of two. Yet, with the roomy Rebel cockpit that can seat six, we're also looking forward to some lazy summer daysailing when friends and family show up. Either way, we'll certainly get our money's worth from this tough but nimble little classic. LOA 16' 1.5" LWL 15' 10" Beam 6' 7.5" Draft 3' 4" Weight 700 lbs, Sail area 166 sq. ft.

16' day sailer w/trlr, cabin, mainsail, and self-furlling jib -- Priced to sell!

Niantic, Connecticut

Make Compac Yacht

Model 16/2 (extended Bow For Larger Jib)

Length 16.2

1988 16.2ft Compac Yacht. Extended bow to accommodate larger jib. Self-furling jib, standard jib, and mainsail all included. Interior and exterior in okay condition. Needs new bottom coat paint. This boat has sailed all over Long Island Sound, from Niantic Bay to Plum Island. My father is done with it and I am trying to pass it on to a new owner. A little bit of work and this boat can be a nice day sailer.

sailboat 33 ft Tarten Ten Race boat Day Sailor with incredible trailer

Ada, Michigan

Make S&S

Model Tarten Ten

1978 S&S Tarten Ten in above average condition senior citizen owned. less that 100 actual hours of total actual use. comes with mast, jib, tiller handle and all deck railing is inside the boat. comes with a custom built trailer tri-axle 3 7k rated axles will hold up to 45 ft boat, has extender very heavy duty construction. add 16ft to ease launch. call 616 874 8235 for details paypal used for deposit only unless approved by seller. i do have a heavy duty cradle that is also on a trailer and ready for transport anywhere. the cradle is not offered with this action. may be purchased seperatly. the boat was appraised between 13 and 17 and the trailer was appraised at 10 to 12

sailboat 33 ft Taren Ten Race boat Day Sailer less than 100 hours diesel motor

1978 S&S Tarten Ten in above average condition senior citizen owned. less that 100 actual hours of use. i have a custom built trailer,, has extender very heavy duty construction. add 16ft to ease launch and a cradle that are options to the sale not offered in this post. call 616 874 8235 for details paypal used for deposit only unless approved by seller. have heavy duty cradle available if needed.

1969 Columbian 22 Sailboat

Patchogue, New York

Make Columbian

Model 22 Sailboat

1969 Columbian 22 Sailboat Thick hulled sailing vessel, sails in great shape, new awlgrip, rated for 8 passengers, shows Bristol, fixed keel draws 3 ft This vessel has sink and marine head below.  No disappointments, call Dave Glover immediately for more info and pixs.  1/19/16 PRICE REDUCTON, MUST SEE

1992 Hunter 37.5 Legend

Oviedo, Florida

Model 37.5 Legend

1992 Hunter 37.5 Legend Brand new listing. This is a lightly used and good looking Hunter 37.5 Legend with approx. 548 hours on the Yanmar 3HM35F diesel engine. This 37.5 Legend is one of Hunter's optimum size sailboats for comfort, space, strength and sailing performance. Cruise to the Bahamas in this sweet boat with the new Garmin touchscreen Echomap70 GPS and enjoy some island life! Maximum strength is achieved by a bonded full length internal frame and stringer system; chain plates then are anchored to this main frame system to carry the rig loads of this strong performance cruiser. The 12 ft. 10 in. beam and 6' 6" head room provides more than ample space and comfort. The hugh aft athwart berth and forward berth provide comfortable sleeping quarters for 4 adults with provisions for three more people to sleep in the main salon area. A comfortable size head with shower and vanity is located rear of center near master aft berth. The 16,400 lbs. displacement, 5,900 lbs. solid lead wing keel (4 ft. 11 in draft) makes for a comfortable sailing experience. Mystic Quest carries a 75 gal fresh water tank, 35 gal fuel tank and 25 gal holding tank. The vintage of this Hunter Legend still has the rich teak woods with thick teak trim and moldings, ash battens, cedar line lockers, corian galley and vanity counter tops. This is one of the last Hunter models with the costly but preferred full length extended aluminum toe rails. The original natural gas system was converted to propane system with locker and aluminum propane tank, electric solenoid on/off switch in custom teak mounting in galley. Dockside factory installed central AC system with ducts to vents in all boat compartments. Original factory Hood two line headsail furling replaced with Hood single line furling system.  Blister free bottom received 5 coats of Interlux 2000 barrier paint for extended blister free bottom in 2014. In the cockpit ther is top quality waterproof cushions (10) and a custom fitted vinyl cover. A custom designed cockpit table made from weather resistant starboard material. Mast head tri-light and standard running lights with the new touchscreen Garmin Echomap 70 GPS chart system. Ice box was converted to electric refrigeration and microwave is in a custom made teak shelf. The Dutchman's furling system was replaced with lazy jacks. The sails are original sails but are in good condition and were stored inside for most of their life. The auto pilot and wind gauge's are not working. The shower has never been used.

2010 Jeanneau 45 DS

Make Jeanneau

Model 45 DS

2010 Jeanneau 45 DS Dimensions Year: 2010 LOA: 45 ft, Beam: 14 ft 4 in Draft: 5 ft 6in (shoal draft) Displacement: 22932 lbs,Ballast: 6514 lbs Headroom: 6 ft 4 in Accommodations Two Cabin version with two heads, large aft cabin master suite with private head and shower. Mattress with Froli Sleep System.Huge main salon with U shaped dining table. Galley with 3 burner stove and oven, refrigeration and freezer, double sinks, fridge. Beige Ultraleather cushions in main salon, dining table converts settee to double berth. Number of cabins: 2 Number of double berths: 3 Number of heads: 2 2 Electric heads with freshwater flushing or seawater flushing Creature Comfort Air conditioning / Heating reverse cycle -2 units, 9K and 16K reverse cycle Hot water tank with electric and engine heating Galley Double sinks Front and Top loading fridge Deep freezer with separate Compressor 3 burner stove and oven. Microwave Engine Yanmar 4JH4TE 75 Hp Turbo Diesel Engine Hours: approx. 270 Propeller: 3 blade folding propeller (Flexofold) and orig.3 fixed blade propeller as spare Bow Thruster 7 Hp Hull and Deck Wood cockpit floor and seats Wood folding cockpit table, varnished with cover Full Canvas, dodger, bimini, connector, Frame is heavy duty stainless, handrails on Dodger. Electric Anchor Windlass with 2nd control at helm Cockpit Hot and Cold Shower Wheel and Winch and instrument covers Life line gates midship Dual Leather wrapped wheels Sails and Sail Handling Furling main Roller Furling Genoa 140 Percent Electric 53ST Genoa Winches Coach Roof Harken 44ST Electric Winch Port side Coach Roof Harken 44ST Winch Starboard side All lines lead aft to Cockpit thru rope clutches Navigation Equipment Raymarine network with: Chart Plotter -Raymarine E 130W with Platinum charts Autopilot Depth sounder Log-speedometer Wind speed and direction Electronic Compass 4 ST 70 displays, one for autopilot, 3 free programmable VHF -Standard Horizon with DSC and remote mic at helm Magnetic Compass -Two Entertainment Equipment Stereo with Blue Tooth and remote control Bose Speakers in Cabin and cockpit speakers TV set (LED) with separate DVD Player in main salon Tanks Fresh Water: 2 Tanks (162 Gallons) Fuel: 1 Tank (63 Gallons) Holding Tanks: 2 Tanks (34 Gallons) Electrical Electrical Circuit: 12V 110V System with 50 Amp shore power inlet 2000 Watt Magnum Inverter and back-up charger with Remote Control Additional 110 Ah house battery 60 Amp Battery charger LED Navigation lights, LED Deck Light, LED interior lighti

1984 Endeavour 38

Deltaville, Virginia

Make Endeavour

1984 Endeavour 38 This 1984 Endeavour 38 Aft Cockpit,"Chameleon" is the definition of solid. She performs like a dream and is built with the state-of-the-art construction methods Endeavour is known for.  Her extraordinary deck space features inboard chainplates and genoa tracks allowing that fine trim for closehauled work.  Electronics on this beautiful boat include:Raymarine Chartplotter/Radar with cards for East Coast, Bahamas, and Eastern CarribeanST60 Wind, Depth, and SpeedAIS West Marine 1000Raymarine Autohelm 7000VHF Icom 502SSB Icom, Tuner, AntennaRadar Reflector The boat's electrical system includes:2 - 80 Watt Solar Panels2- 110 Power Cords with adapters for 35 and 50 AMP ServiceLink 10 MonitorStarting Battery and 410 amp hour House Bank (4 Golf Cart Batteries)Freedom HF 1800 Battery Charger/Inverter This 1984 Endeavour 38 has had a number of updates and upgrades over the years. Some rigging updates are:Profurl Roller Furling NEW in 2009MacPack w/Lazyjacks NEW in 2013Mainsail w/ battens NEW in 2009Inventory includes Genoa 130 and Jib 100NEW Rigging in 2009 Ground Tackle for the boat includes: 65 lb CQR Anchor, 45 lb Claw Anchor, 225 Ft 5/16 G-4 Chain, 100 Ft BBB Chain, 200 Ft Rope, Lewmar Electric Windlass, Jabsco Pro Max 5.0 Raw Water Washdown. Below, you have all your comforts of home! Cruise Air Drop In Air Conditioner, LED Lights throughout, Eno 3 Burner Propane Stove and Oven, and Frigaboat Refrigerator/Freezer. The equipment list for this boat goes on and on! Call Norton Yachts today to find out more on this boat or to schedule an appointment to see her! She is truly a beauty, and she is ready to go sailing!

Narrow Results

Current search reset all.

• Keyword: sailboats 16 ft
• Beneteau (3)
• MacGregor (2)
• BENETEAU (1)
• Bavaria (1)
• Cape Cod Shipbuilders (1)
• Cape Dory (1)
• Catalina (1)
• Cheoy Lee (1)
• Chrysler (1)
• Columbian (1)
• Compac Yacht (1)
• Endeavour (1)
• Ericson (1)
• Fountaine Pajot (1)
• Gulfstar (1)
• Gulfstream (1)
• HERITAGE YACHT CORP (1)
• Hobie Cat (1)
• Jeanneau (1)
• Macgregor 26S (1)
• Nor'Sea (1)
• Sailboats (11)
• Daysailer Sailboats (10)
• Sloop Sailboats (9)
• Cruiser Motorcycles (3)
• Cruiser Sailboats (2)
• Catamaran Sailboats (1)
• Florida (10)
• Michigan (3)
• Pennsylvania (3)
• Washington (3)
• Maryland (2)
• New York (2)
• North Carolina (2)
• Wisconsin (2)
• California (1)
• Connecticut (1)
• Delaware (1)
• Georgia (1)
• Illinois (1)
• Indiana (1)
• Louisiana (1)
• Massachusetts (1)
• Oklahoma (1)
• Rhode Island (1)
• Virginia (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

1997 EZ Tow Trailer P2540T

Saucier, MS

1999 Bluewater 2150

Murdock, FL

1994 Hunter Marine 42 passage

Cape Haze, FL

2015 Sea Hunt Ultra 235

Inver Grove Heights, MN

2008 MasterCraft X2

Corona de Tucson, AZ

2006 Sea Ray 270 Amberjack

Houston, TX

2024 Singapore boat works Landing Craft LC 10m

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

• Vessel Reviews
• Passenger Vessel World
• Offshore World
• Tug and Salvage World
• Maritime Security World
• Specialised Fields
• Marine Projects World
• Small Craft World
• Tanker World
• Dry Cargo World
• Boxship World
• Aquaculture World
• Trawling World
• Longlining World
• Seining World
• Potting World
• Other Fishing Methods
• Regulation & Enforcement
• Feature Weeks
• Classifieds
• Book Reviews

VESSEL REVIEW | Sinichka – Electric commuter boats designed for Russia’s Moskva River

A series of three new electric monohull commuter ferries have already begun operational sailings on the Moskva River in the Russian capital Moscow.

Built by Russian shipyard Emperium, sister vessels Sinichka , Filka , and Presnya – all named after rivers in Moscow – are being operated by the Moscow Department of Transport and Road Infrastructure Development (Moscow Deptrans). They are the first units of a planned fleet of 20 vessels that will serve the capital city and other nearby communities. The new ferry system will be the water transport system to be operated on the Moskva River in 16 years.

Each vessel has a welded aluminium hull, an LOA of 21 metres, a beam of 6.2 metres, a draught of only 1.4 metres, a displacement of 40 tonnes, and capacity for 80 passengers plus two crewmembers. Seating is available for 42 passengers on each ferry, and the main cabins are also fitted with USB charging ports, wifi connectivity, tables, toilets, and space for bicycles and scooters. The cabin layout can be rearranged to allow the operator to adjust the distances between the seats and to install armrests of varying widths.

An open upper deck is also accessible to passengers and is the only area on each ferry where smoking is allowed.

The ferries are all of modular construction with each ferry’s wheelhouse, main cabin, and other structural elements being built as complete, separate components. This enables the ferries to be easily dismantled for transport to anywhere in Russia by rail and then quickly re-assembled within seven days.

The ferries are also ice-capable. Recently completed operational trials on the Moskva showed that the vessels can also easily navigate under mild winter conditions with broken surface ice, though year-round operations are planned for the entire fleet.

The ferries are each fitted with 500kWh lithium iron phosphate battery packs that supply power to two 134kW motors. This configuration can deliver a maximum speed of 11.8 knots, a cruising speed of just under 10 knots, and a range of 150 kilometres.

Emperium said the transfer of rotation of electric motors to the propeller is carried out by direct drive. As a propulsion installation, a pulling rotary propeller-steering column with double screws is used. The installation of double pulling screws, with similar power, allows an operator to increase the efficiency of the propulsion system to deliver a slightly higher speed or to reduce energy consumption. This arrangement also provides the ferries with enhanced manoeuvrability necessary for navigating in close quarters.

The batteries themselves have projected service lives of 10 to 12 years and are fitted with safety features such as built-in fire extinguishers and gas vents. Quick-disconnect features allow the batteries to be easily removed for replacement or maintenance.

Some of our readers have expressed disquiet at our publication of reviews and articles describing new vessels from Russia. We at Baird Maritime can understand and sympathise with those views. However, despite the behaviour of the country’s leaders, we believe that the maritime world needs to learn of the latest developments in vessel design and construction there.

Click here to read other news stories, features, opinion articles, and vessel reviews as part of this month’s Passenger Vessel Week.

Related Posts

Baird Maritime

Tags: Emperium Filka Moscow Moscow Department of Transport and Road Infrastructure Development Moskva River Presnya Russia Sinichka WBW newbuild

• Previous VESSEL REVIEW | Ferry Rokko – Second 194m Ro-Pax for Miyazaki Car Ferry
• Next Brighton man to be charged for illegal abalone haul

Baird Maritime , launched in 1978, is one of the world's premier maritime publishing houses.

The company produces the leading maritime new portal BairdMaritime.com , home of the world famous Work Boat World, Fishing Boat World, Ship World, Ausmarine, and Commercial Mariner sub-sites, and the industry-leading ship brokerage platforms WorkBoatWorld.com and ShipWorld.com .

Contact us: [email protected]

© Copyright - Baird Maritime

• Terms & Conditions
• Advertise with Baird Maritime
• Submit News/Leads

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Nordica 16 is a 16 ′ 0 ″ / 4.9 m monohull sailboat designed by Ole Jensen and built by Exe Fibercraft Ltd. starting in 1975.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Derived from the Swedish built LYNAES 14. Similar versions: DANICA 16. (25 built) MIDGET 15, Lynæs Shipyard Ltd.,Germany. OOSTZEEJOL (15) Thanks to Jack Gutter for providing information.

Embed this page on your own website by copying and pasting this code.

Discover Related Sailboats

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.