caliber yachts vancouver

Our videos have over 10 million views on YouTube. We sell boats throughout North America and can sell yours. BC representatives in Vancouver , Victoria , Nanaimo , Campbell River , Maple Bay , Comox

Neptunus Yachts for Sale in BC

Building a neptunus.

Calibre Yacht Sales

Location & Hours

Suggest an edit

408-55 Water Street

Vancouver, BC V6B 1A1

Gastown, Downtown

You Might Also Consider

Pacific Angler Fishing Charters

1.5 miles away from Calibre Yacht Sales

Pacific Angler offers fully guided BC fishing charters including Vancouver area fishing adventures for salmon. Wild Pacific salmon are one of the most important and sought after angling species in the BC fishing scene, along with… read more

in Boat Charters, Fishing

Curve Of Time Charters

1.4 miles away from Calibre Yacht Sales

in Boating, Boat Tours, Boat Charters

Vancouver Mysteries

EN P. said "My bf contracted me to be his partner in a murder mystery (cold case) investigation, that he was mandated by the Investigations Team and required solving in a timely manner. After partnering up we were given a rundown by our field…" read more

in Walking Tours, Team Building Activities, Escape Games

About the Business

Our videos have over 10 million views on YouTube. We sell boats throughout North America and can sell yours. BC representatives in Vancouver, Victoria, Nanaimo, Campbell River, Maple Bay, Comox, Powell River. …

Recommended Reviews

• 1 star rating Not good
• 2 star rating Could’ve been better
• 3 star rating OK
• 4 star rating Good
• 5 star rating Great

Select your rating

Boating Near Me

Other Boating Nearby

Find more Boating near Calibre Yacht Sales

• Vancouver International Boat Show
• Boating BC Conference
• Become a Member
• Sector Groups
• Grants & Sponsorships
• Just Add Water
• Get Certified
• Rent or Charter
• Owning a Boat
• Boating Destinations
• Power Boating
• Boat Safe BC
• Shared Waterways
• Boat Disposal
• Transport Canada Abandoned Boats Program
• Green Boating
• Boating Etiquette
• Protect Our Marine Mammals
• Boating Member Map
• Job Postings
• Apprenticeship Programs
• Glenn Spartz Scholarship
• Member Savings Program
• Promote Your Membership
• Member Documents
• 2023 Boating BC Conference
• Annual General Meeting
• Member Website Manual

Calibre Yacht Sales

About calibre yacht sales.

At Calibre Yachts it’s not just about the boat. It’s about a lifestyle. Our mission and our passion is to bring to life the dream of exploring our beautiful coastline in a boat that is uniquely suited to the individual needs of our clients.

That’s why, for the Calibre team of professional brokers, we believe in building relationships. Our first step is to gain a real understanding of what a perfect day on the water means to you. Maybe it’s a relaxing sail just outside the marina. Or maybe it’s a high sea adventure on a long range cruiser. The possibilities are vast. Wherever you want to be we’ll get you there.

We’ll go to work to find your perfect match either from our own inventory of exceptional boats or we’ll explore the world through our sophisticated on-line network.

And, together, once we’ve found your perfect match our team will do all the heavy lifting. The process to the inexperienced can be daunting but our goal is to make it fun and rewarding. We’ll arrange importing from the United States, licensing, transporting and we’ll even find you moorage when your dream boat arrives.

• Additional Office 1003 S Island Hwy, Campbell River BC V9W 8C7
• Additional Office 6145 Genoa Bay Road Maple Bay, Duncan BC V9L 5T7
• Additional Office 905 Grilse Lane, Brentwood Bay, BC, V8M1B5
• Additional Office 1690 Stewart Avenue, Nanaimo, BC, V9S 4E1

Company Contact

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

Check Your Shorepower System for Hidden Dangers

How Dangerous is Your Shore Power?

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

Gonytia Hot Knife Proves its Mettle

How to Handle the Head

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

Caliber 40 LRC

This well-built cruising boat with an attractive wood interior has loads of room but sails marginally to windward and has a few problems with its tanks..

Brothers George and Michael McCreary, and Marshall Jones, formed Caliber Yachts Inc. as a backyard boatbuilding company in 1979. No strangers to the sailing world, the brothers grew up racing and cruising Florida and the Caribbean.

Following high school, Mike earned a degree in engineering, with a specialty in naval architecture, from the University of Michigan. He served his apprenticeship on the production line at Gulfstar Yachts, and as a designer for Endeavour Yachts.

George, who manages the business side, received a degree in business administration and marketing from the University of Florida, after which he spent three years working for Morgan Yachts.

Jones began studying the production side of the business immediately following graduation from high school when he went to work at Com-Pac Yachts.

Without bank financing, Caliber Yachts began building boats one at a time, producing its first, a 28-footer, in 1981. By 1985 the company was sufficiently solvent to build a factory, and introduce a 33-footer. A 30, 35, 40, and 47 followed. The Long Range Cruising (LRC) line began in 1994.

George, who acts as company spokesman, says the construction and design of the LRC is similar to earlier models. The primary difference is expanded tankage for fuel and water.

The Caliber 40 LRC has a projected cruising range of 1,484 miles when motoring at 7 knots with a Yanmar 50 diesel running at 2,500 rpm.

George is tightlipped about information he considers proprietary—the company’s gross sales, annual production, and number of employees or dealers, for example.

Design Michael McCreary designed the 40 LRC, which is most often compared to an Island Packet.

It has a relatively fine entry, bowsprit and bobstay, straight sheer, reverse transom, and flat coachroof. The displacement/length ratio is a moderately hefty 281, indicating it has the hull volume to carry necessary cruising stores. A Valiant 40 is 256, a Sabre 38 224, and a J/40 176.

Ballast of 9,500 lbs. is 44% of displacement. McCreary says its limit of positive stability is 138°, well in excess of the 120 figure many consider minimum for offshore sailing.

The underbody shows a long cruising fin; you could also call it a full keel with a cutaway forefoot and a monster “Brewer bite.” The rudder is skeg-mounted for protection and tracking.

Shrouds are led to chainplates mounted inboard of the toerail, and the genoa track is close to the cabin for narrow sheeting angles.

McCreary claims the boat tacks through 85°-90°, but we were unable to approach those tacking angles during our test sail, nor have we heard from any owner capable of tacking through less than 96°, including one who invested $6,000 on flat cut, laminated sails.

Sail area is 739 sq. ft., with a sail area/displacement (SA/D) of 15.3; that compares to a Valiant 40 at 15.5, falling in the general range for offshore cruisers.

The company has built 130 40 LCRs since its introduction in 1994.

Construction McCreary would not provide a complete lamination schedule for publication because he considers the information proprietary and subject to misinterpretation. He said that buyers or owners who want that information should contact him directly.

However, he described the lay-up in general terms.

Hand lay-up of the solid glass hull begins with molds sprayed with isophthalic-neopentyl gelcoat, followed by a skin layer of .75-oz. split-strand fiberglass set in vinylester resin to prevent blistering.

The keel shape is part of the hull mold with a cavity for the iron and concrete ballast that is glassed over.

Though no molded liners or pans are used except in the heads (an appropriate application to deal with moisture from showers and toilet leaks), the hull is stiffened by the bonding in of a molded Integral Strength-Grid System™ that incorporates water and two fuel tanks.

The deck is cored with Marine Tech plywood cut into 2-7/8″ squares bedded in alternating layers of 1.5-oz. mat and 24-oz. roving. McCreary says that wood is used because it resists compression when deck hardware is installed, which he considers a shortcoming of balsa and foam cores. (Many builders using balsa or foam omit it where hardware is to be installed, and use wood or solid resin/glass.)

Extra layers of glass are laminated around the perimeter of the cabin and cockpit, and radiuses are reinforced with 18-oz. Fabmat.

The Quad-Seal Deck to Hull System™ is sturdy and well done. The deck and hull flanges are bonded with 3M 5200. The inside seam is bonded with copolymer tape. An L-shaped aluminum toerail covers the exterior seam; it is also bonded with 3M 5200 and fastened with stainless steel carriage bolts on 6″ centers. A stainless rubrail covers the seam between toerail and hull.

Caliber seems to have a name for everything, including conventional bonding of bulkheads to the hull. Caliber calls its method The Multi-Bulkhead Bonding System™. Furniture and cabinetry are bonded in the same manner. A built-up plywood interior bonded to the hull and deck is in many ways preferable to a one-piece fiberglass pan interior.

Chainplates are through-bolted to bulkheads as well as the deck. Caliber calls it the Double-Lock Chainplate System™.

The molded rudder is constructed of a stainless steel plate welded to a 2″ diameter stainless steel stock encapsulated in fiberglass. When released from the mold, fiberglass tape is laid over the seam to prevent leaks, and the appendage is then faired and sprayed with gelcoat.

Loads on the rudderstock are handled by three supports: a solid stainless steel shoe attached to the bottom of the skeg, a bronze stuffing box at the waterline, and an upper bearing.

To offset the potential for contamination of fuel or water, boats are equipped with “Duel Diesel and Dual Fresh Water” system control panels with independent piping and filters.

However, while at the fuel dock the owners of our test boat complained that the fuel and water fillers are not marked, and are so close to each other that spilled fuel could enter the water filler.

Several owners think the boat’s holding tank incorporates a major design flaw. The 110-gal. integral tank is in the bow below the anchor locker. The aft side of the holding tank extends from the bottom of the hull to the deck, doubling as a watertight collision bulkhead.

The design provides structural integrity, but McCreary confirmed that when pumping out the tank it is critical that vent screens are clean; otherwise, a clogged vent may create sufficient suction on the holding tank wall to cause delamination of the hull. After talking with several owners, we think McCreary has understated the problem.

One owner experienced the problem when flushing the toilet while sailing offshore.

“As I pumped I heard a scary cracking sound in the holding tank,” he said. Upon inspection, he found the vent micro-screens were clogged. “When I opened the Y-valve I heard a major ‘whoosh’ as pressure was released,” he said.

Another owner said a more damaging result occurred under similar circumstances when the screen clogged and the top of the holding tank split away from the hull, creating an 11″ long crack, not to mention a horrible mess.

Additionally, a full holding tank adds 912 lbs. of weight in the bow, according to McCreary; coupled with anchor and rode, we think that is excessive. The holding tank also services the aft head, so waste may accumulate in hoses under the saloon.

The vacuum problem may extend to water and fuel tanks equipped with the same screens. One owner reported the inability to pump water from a tank, though the water pump was operating properly. The screens require cleaning or replacement.

Deck The T-shaped cockpit is comfortable, with 7′ 6″ seats and high backrests.

A port lazarette is 32″ deep and has a 16″ wide shelf and scallops for organizing spare lines. It also provides access to the aft end of the engine, batteries, and steering controls. There is space for the installation of a cabin heating system and genset.

Other features include an ice chest and vented propane locker with room for two 10-lb. bottles.

The transom platform has a built-in swim ladder.

For sail handling, two-speed Lewmar 48 winches are located on the coaming within reach of the helmsman, but the mainsheet traveler, mounted on the coachroof, requires a shorthanded sailor to leave the helm to trim the main. Two Lewmar 30s are mounted on the cabin top with triple rope clutches for sail control lines.

The untapered Selden mast has single spreaders.

The test boat was equipped with an optional inner forestay for setting a staysail. Tension on the stay is controlled by an uphaul inside the mast attached to a stainless sliding car to which the stay is attached. When not in service, the stay is secured out of the way to a padeye on deck.

The headstay and upper shrouds are 3/8″; the backstay and lower shrouds are 5/16″. The split backstay eases boarding but a single backstay would allow for an integral adjuster to control sail shape.

With wide decks, lifelines, handrails and slotted toerail, movement about the boat is easy and safe.

A double-roller stainless steel bowsprit moves ground tackle well forward of the stem and furling gear. The split anchor locker on our test boat carried a 30-kg Bruce, 200′ of chain and 200′ of rode in one compartment, and a 25-lb. Danforth and rode in the other.

Accommodations Joinerwork is nicely done; the 40 LRC looks like a traditional cruising boat—teak and holly sole, teak hull liners and bulkheads.

Headroom is 6′ 2″ throughout.

The master stateroom forward has an offset double berth measuring 6′ 4″ x 4′ 4″. It’s a nice change from the usual V-berth, though the person sleeping outboard has to climb over his or her partner to get out.

We like the head in the bow, but it won’t be as comfortable to use at sea as the aft head. There is a separate shower stall.

The L-shaped dinette settee to port is 6′ 2″ long, and converts to a double berth. The starboard settee is 6′. The dinette table folds down from the bulkhead.

In the galley, the fiberglass sink is located on centerline, where it should be to prevent water from flooding through the drain. The stove/oven is Force 10 and there’s room for a microwave. The 11 cu. ft. top loading icebox drains into a sump pump box at the mast step.

The nav station is aft of the galley. The navigator faces a large electrical and instrument panel outboard and communicates with the helmsman by opening a port beside his seat.

To starboard is what McCreary calls a “day head,” with doors from the saloon or aft berth. The head measures 42″ x 36″ and has toilet, sink and a shower; one dealer referred to it as a “telephone booth.”

The aft stateroom berth measures 6′ 7″x4′ 4″. There’s a cedar-lined hanging locker. Storage space below the berth is shared with an 11-gallon water heater.

Access to wiring, plumbing, through-hulls and tank inspection ports throughout the boat are from inside cabinets or behind fascias.

The top step on the companionway ladder opens to provide access to the top of engine; if desired, the entire ladder/box can be removed.

One owner complained that the engine compartment is inadequately insulated; he added lead-lined foam insulation but is still dissatisfied with engine noise in the saloon.

Performance Our test sail was with a Seattle couple that has owned four boats prior to the 40 LRC, most recently a light displacement, fin keel 36-footer.

“We didn’t want a full keel,” they said. “But we wanted a good shape, aesthetics, and a full-batten main and cutter rig so we could reef and sail with the staysail in 40 knots of breeze.

“The first thing we had to adapt to was the difference in feel and stiffness of this boat. It’s not as much fun as our old 36, but it is easier to sail.”

We tested the boat in 0-12 knots of apparent wind on calm waters, setting a 135% genoa on a Harken furler.

Considering its displacement, it is no surprise that in less than 6 knots of wind the boat moves only with assistance from the “iron genny.” When windspeed reached 6 knots it made 2-3 knots; at 7-9 knots of breeze we accelerated to 4.5 knots. Then, in 9-12 knots of wind, we sailed at 5-5.5 knots to within 60° of the apparent wind. On a broad reach, we managed to hit 7.2 knots in 10-12 knot puffs.

Additional performance information came from another Seattle owner who has logged more than 4,000 miles on his boat. A racer-turned-cruiser, he has pushed the boat hard and has computerized performance data. He replaced the factory main with a flat cut, large roach Spectra sail.

“I wanted to find out just how seaworthy the boat is, and how well she sails,” he said. “We sailed 250 miles to weather during a 36-hour trip up the west coast of Vancouver Island. Carried a 120% jib and full main sailing into 5-6 foot seas in steady 15-20-knot winds. I had a mapping program calibrated to my GPS and found that the best tacking angle we could produce was 112°.

“Going to weather in winds over 20 knots we furl the jib and hoist an overlapping staysail. We added sail track inside the Dorades to improve pointing and found that when wind speeds reach 20 knots we point 5° higher with the staysail, improve our VMG, and are more comfortable.

“On the return downwind we noticed a tendency to roll to windward in heavy seas, even with shortened headsail.”

Following an offshore passage from San Francisco to San Diego a cruising couple echoed his sentiments.

“When beam and broad reaching in winds around 25 knots the boat will round up if I have too much sail up,” the husband said. “When on a broad reach it gets even worse because the rollers hitting the stern push the stern to leeward, so it’s important to shorten sail early. On the other hand, I don’t think this was any worse than any other boat I’ve sailed on.”

A number of owners said they have fitted a feathering Max-Prop to the 50-hp. Yanmar diesel, which improves maneuverability, especially in reverse, and reduces drag under sail.

Warranty The company’s one-year warranty is too short, considering the price and intended use of the boat. The warranty for blistering is extended to five years if the bottom is epoxied during construction.

However, Chester Kolascz, a dealer who has represented the company for eight years in Michigan and also represents two other mainstream builders, said: “My service department likes Caliber best because it has the least amount of warranty work of any of the three.”

Conclusion The design and construction of the Caliber 40 LRC make it suitable for offshore use. In decent winds it should give 150-180-mile days. Upwind performance is typical of moderately heavy cruising boats; odds are she’ll be motorsailed on long coastal trips to weather. On balance, she’ll cover fewer miles than lighter-weight competitors, but will provide a more comfortable ride in heavy seas.

Among owners contacted, the company gets mixed reviews regarding post-sale service. In one instance the company shared the expense of a repair more than one year after expiration of the warranty.

Base price seems a fair $204,950, FOB Clearwater, Florida. For comparison, a Cabo Rico 40 is close to $400,000, a Catalina 40 Mk II and a Jeanneau Sun Fast 40 about $170,000, and the C&C 121 Express about $220,000.

Contact- Caliber Yachts, 4551 107th Circle N., Clearwater, FL 33762; 813/573-0627.

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

40-Footer Boat Tours – With Some Big Surprises! | Boat Tour

Electrical Do’s and Don’ts

Bahamas Travel Advisory: Cause for Concern?

Island Packet 370: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• Member Directory
• Support & Resources

Calibre Yacht Sales Inc.

• Mosquito Creek Marina 415 West Esplanade North Vancouver BC V7M 1A6
• (604) 929-0651
• Visit Website

At Calibre Yachts it's not just about the boat. It's about a lifestyle. Our mission and our passion is to bring to life the dream of exploring our beautiful coastline in a boat that is uniquely suited to the individual needs of our clients.

• Company Information

Rep/Contact Info

Richard evans, kristine schenkey.

• Phone: (250) 716-2022
• Send an Email

Tell a Friend

See all Powerboats for sale

See all Sailboats for sale

Selling? Free online valuation here

We offer financing on pre-owned boats.

Click here, what people had to say.

I enjoyed my experience working with Sam. He’s a knowledgeable, trustworthy, smart and reliable guy. He went above and beyond to help me out with some post-purchase tasks that I was trying to juggle. I also found your listing helpful as it provided a complete description of the boat and included a lot of good pics. Frank “

Sam is very professional and walked us through the process. He is a great asset to your team. Mike “

WELCOME TO VANCOUVER YACHT SALES

• Used boat sales
• Powerboat & sailboats for sale
• Trawlers, motoryachts, and expedition vessels
• Specializing in used sales of Fleming, Nordhavn, Cheoy Lee, Hatteras, Azimut, Ocean Alexander, Marquis, Sea Ray, Meridian, Selene, Carver, Navigator, West Bay Sonship, Defever, Canoe Cove, and other fine Motoryachts and Sailing yachts.
• Free online boat evaluation

Your full service yacht / boat brokerage based in Vancouver! We service the city of Vancouver and the greater Vancouver area, Vancouver Island including Victoria, Sidney, Swartz Bay, north west USA including Washington, and throughout North America via our sister companies owned by United City Yachts - we offer local representation with international reach. Now with locations across the country including Vancouver, Toronto, Georgian Bay, Kingston, and Montreal, United City Yachts is Canada's network for buying and selling yachts!

Vancouver Yacht Sales offers buyers and sellers an unparalleled level of service - Handling every aspect of your boat purchase/sale from the very beginning all the way through to the closing and after sale service. We appreciate your business and would love the opportunity to earn it by buying/selling one boat at a time. Please contact one of our friendly yacht / boat brokers today.

As experienced Canadian yacht brokers, Vancouver Yacht Sales is ready to work hard for you - to find the perfect pre owned yacht for sale, or to work as your broker to market and sell your existing boat. When you work with an experienced boat brokerage firm, like Vancouver Yacht Sales, you can feel confidence that the transaction will be handled by experts in marine sales.

Thank you for visiting the Vancouver Yacht Sales website. Whether you are in the market to buy a used sail or motor yacht or have a boat that you would like to sell, the advantages of working with Vancouver Yacht Sales and their Canada-wide yacht brokerage network are considerable.

At Vancouver Yacht Sales we live and breathe boats! No matter what kind of boat you are shopping for; sail boat, off-shore, convertible fishing boat, luxury yacht, high performance boat, trawler, or sedan bridge boat, we would love to talk with you and help you find the ideal boat.

Shopping for a quality pre-owned power boat on the west coast? Find the perfect used motor yacht to match your requirements at Vancouver Yacht Sales. No matter if you are on the market for an express cruiser, sedan cruiser, aft cabin cruiser, expedition yacht tug, trawler, sport fishing boat or sport fishing convertible, our yacht brokerage team will work closely with you, every step of the way. Our inventory of excellent pre-owned power yachts includes all the major boat manufacturers including Regal, Silverton, Meridian, Sunseeker, Neptunus, Carver, Norhaven, Sea Ray, Rinker, Nordic Tugs, Kadey Kroger, Hatteras, Doral, Cruisers, Maxum, and many more.

SEARCH OUR BOATS

Vancouver yacht sales is part of united city yachts, canada's yacht sales network with locations across canada to serve you.

Buying or Selling in Toronto?

Buying or Selling in Kingston?

Buying or Selling in Georgian Bay?

Buying or Selling in Montreal?

Buying or Selling in Kelowna?

Buying or Selling on Vancouver Island?

Buy and Sell with confidence using United City Yachts Industry leading Partner Network

With our partners at Walker Financial

Cross border transactions

Buy/Sell in the USA leveraging our partnership with Livingston International

Protect your funds

All transactions handled via a dedicated trust account at Baker Tilly, an internationally recognized accounting firm