14 foot hunter sailboat

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Hunter 140 is a 14 ′ 0 ″ / 4.3 m monohull sailboat designed by Hunter Design Team and built by Hunter Marine starting in 2003.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

With the optional motor mount, the HUNTER 140 can accept a 2.5hp outboard motor.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Hunter Sailboats For Sale

5 listings found.

36 Hunter Vision 1993

Freshwater Only – 1989 Hunter 33.5 Sloop-Rigged Cruiser, Shoal Wing Keel

1978 Hunter 30 Cheurbini

Hunter 44 DS perfect to live aboard!

Hunter sailboats for sale on sailtrader, new hunter sailboats.

New hunter sailboats for sale come in a range of sizes for any sailor to enjoy. New Hunter sailboats are designed for stability and conformable performance. New designed Hunter’s have well-thought deck layout making it simple to sail shorthanded. 

Three new Hunter sailboat categories are: tailorable daysailor (15-20 ft), midsize keelboats (31-37 ft), large keelboats (40-50 ft). New hunter sailboat prices range from $10,123 for a 15 ft daysailor to $433,985 for the new 50′ center cockpit model. Prices can vary for each model depending on the options chosen by the buyer.

Used Hunter Sailboats

Find a range of used Hunter sailboats for sale on SailTrader with photos, prices and details from private sellers and dealers. For over 40 years Hunter has been manufacturing sailboats in North America which created many opportunities for sailors to find used Hunter available to buy.

SailTrader is a popular destination for sellers to list their Hunter sailboats for sale. Find used Hunter sailboat prices, photos and complete selling information. If you don’t find the information you’re looking for to buy, contact the seller for details.

Sailboats Privately Listed

SailTrader is the leading website for privately listed Hunter sailboats for sale. Many sailors often choose to sell their sailboat on their own. Sellers can easily create an account, list sailboat details, add photos and get contacted to potential buyers.

Hunter Sailboats For Sale by Dealer

With Hunter sailboats being as popular as they are, shoppers will often find Hunter sailboats for sale by dealers. Hunters are design to be enjoyed by a wide range of sailing skill sets. From weekend cruising to Wednesday night racing, a dealer can help you find the right Hunter sailboat for sale with the feature you need. With Hunters sailboat long history of sailboat manufacturing in North America there have been many different designs throughout the years. A dealer can help you navigate  sailboats with complicated systems.

Sell Your Hunter Sailboat

Aside from selling Hunter Sailboats, SailTrader encourages sailors looking to sell their Hunter sailboat to list them here too. It’s easy to do. Anyone can make a SailTrader account the and list a sailboat for sale.

The Sailor’s Marketplace for Sailboats and Sails.

Sell Your Sailboat

Sailboats for sale.

• New Sailboats
• Used Sailboats
• Cruising Sailboats
• Racing Sailboats

Sell Your Sails

Sails for sail, sail manufacturers.

• North Sails
• Quantum Sails
• Doyle Sails
• UK Sailmakers

Sailing Reviews

• Sailing Line
• Safety Equipment
• Sailing Accesories

As an Amazon Associate SailTrader earns from qualifying purchases.

This website uses cookies to ensure you get the best experience possible. 

The Paine 14 – A Herreshoff – inspired daysailor

CHUCK PAINE’s FLEET OF MODERN KEELBOAT DESIGNS. And their progenitor, the wonderful Herreshoff 12 1/2.

Unlike most centerboard boats of this size, she can be kept on a mooring.   Many centerboard boats will capsize in a squall.

Tired of owning and spending lots of money on a boat you never have time or available crew to enjoy? Read on. If you have a length restriction at 14 feet, this is the sailboat you’ll actually USE. (It has been largely supplanted by the LEVANT 15, which is larger and faster and owing to investments made by its builder, even cheaper)   The PAINE 14 is a scaled-down adaptation of the venerable and much-loved Herreshoff 12 1/2, with a much lower wetted surface hull, fin keel, carbon fiber mast and separate rudder. They are now built in seamless epoxy cold-molded wood construction at French & Webb Boatbuilders, Inc. of Belfast, Maine. At approximately 10% smaller in length, breadth and depth, she preserves much of the “big boat” feel of her predecessor thanks to a lead ballast keel that accounts for nearly half her entire weight, but is optimized for easy trailering, maintenance, launch and retrieval, and home-stowage in your garage. The prototypes shown in these photos have been built and tested, many small refinements have been made, and the boat is now in a word, perfect. The PAINE 14 may be either gaff or marconi rigged though for quick setup and takedown and an edge in performance, the latter is preferable. The size of this design was chosen for its ability to be easily lifted and stowed on the deck of a motoryacht… without this limitation the larger Levant 15 and York 18 might probably be the better choices.

Want to know just how fast a PAINE 14 is in light airs?  Watch the video below.  In her appearance she pays homage to her predecessor, Chuck Paine’s 83- year old Herreshoff 12 1/2. Then you’ll see that like the very best boats, she is so fast she “makes her own wind” when going to windward in light airs.

Amelia from Jim Dugan on Vimeo .

You just can’t slow this beauty down! And even if you could make it go slow, it’s gorgeous.

The PAINE 14 is in every possible way optimized for trailering behind a standard-sized automobile or lifted by a yacht’s crane or a canal-side boat lift. Her carbon fiber mast requires no stays and weighs with its halyards a mere 20 pounds, so it is as easy to deploy as that on a Laser dinghy. Easier, actually, as the sail need not be attached before stepping the mast, and is simply swung up into its Herreshoff-type mast ring, Iwo-Jima style. We have invented a nifty way to attach the mainsail to the mast very quickly… no tedious fitting of little slides to little tracks, so the boat can be launched and gotten going in a short amount of time.

The simple Velcro-strap attachments render obsolete tracks and slides, and mast hoops, with all of their expense and tedium, and make short work of getting a small boat rigged and sailing.

AVAILABLE WITH “PAINE DVT” ROLLER- REEFING, SELF- VANGING SYSTEM!

The PAINE 14   AMELIA was the first yacht ever fitted with the PAINE DVT jib-vanging system. Until now all jibs, and jibs set on jib-booms especially, had the annoying habit of losing effectiveness as the jibsheet is paid out. The jib clew would rise, rather than rotate around the headstay as one would prefer. When this happens the lower part of the jib becomes overtrimmed and stalls, while the upper part is let out too much and loses all its drive.

The PAINE DVT invention consists of a series of fiberglass battens, fitted parallel to the luff, and extending from the leech to the foot of the sail. These battens both stiffen the leech of the sail as do other battens, but in extending to the foot of the sail prevent it from rising.  (Note some other photos in this website show the conventional jib, which is also available).

The PAINE DVT at work.

Off the wind, the sail goes OUT, not UP!

Note that the leech of the jib remains parallel to the luff even though the sheet has been let out

Even let out this much, the angle of the sail to the wind is nearly constant from foot to head.

Make no bones about it, though, inidividually hand-built by the few remaining American craftsmen with nearly half of its weight in cast lead ballast and lots of beautifully varnished (or painted)  mahogany trim, this is in every respect, including its construction cost and the need for yearly maintenance, a true yacht of the old school. But you don’t need a mooring or a marina slip with this one, just a garage or boathouse.

MIND THE GAP!

This design has a balanced rudder, making it exquisite to helm. This means that some of the rudder blade area is forward of the pivot axis. This is great for the helm balance, but since the aft end of the boat has deadrise, as soon as the rudder is swung off-center, a gap opens up between the rudder and the hull. It’s like a forward facing pair of scissors.

One week a few summers ago I took my friend Dennis sailing. It was blowing pretty hard, and just as I cast off the mooring a gust caught us on the wrong tack, forcing us to sail over the dinghy painter which was tied to the mooring float. Needless to say, in she went, and almost immediately we were tethered stern to wind, and a lot of it. The forces involved are huge. There was no choice but to wrestle the mainsail down- no small feat― and roll up the jib to remove the pressure. Then fish around underwater with the boom crutch to finally release the jammed rope, near the point of exhaustion. Not exactly a day of elegant relaxation on the water.

Then just to drive the point home we sailed over a lobster pot line an hour later and did the same thing all over again!

I was determined that this would never happen again. I considered the other ways that have been used to mitigate the problem: A windsurfer fin installed just forward of the rudder, or pieces of shock cord that stretch across the open maw- but neither is entirely proof against a jam for as we all know on a sailboat, if anything possibly can go wrong, it will! So I have invented an absolutely jam-proof solution to the problem. Since many other designs have the combination of a balanced rudder and veed hull, I offer my solution for your benefit. It will be fitted to all PAINE 14 s and LEVANT 15 s and YORK 18 s and any similar yachts I might be asked to design in the future.

What I did was to swing the rudder off-center to its maximum possible turning angle. Then I extended the top of the rudder up until it just cleared the hull at this angle. Of course then when you articulate the rudder toward the centerline there is a hull in the way. This I carved away into a section of the surface of a cone, such that the top of the rudder just “sweeps” the concave cone with a paper-width of clearance- far too little for anything to force its way into the gap.

It works great. The amount of turbulence created by the little discontinuity is trivial. And no more embarrassing and potentially dangerous rudder jams!

This shows the rudder on centerline.

Swung all the way to one side, showing the absence of any gap.

Showing it swung the other way. No way anything larger than a fishing line can get into the gap!

This is the loveliest sailboat you could ever own. It’s hand-built, piece by piece, so only the most cogent sailors can justify owning one. But if you can, it will delight you until your final breath! What the world needs now is certainly not more boats―there’s plenty of clapped-out junk out there―but manifestly far better ones that truly enhance their owners’ lives. You can’t give away old fiberglass boats today, and with good reason. But the few emergent classic sailing designs of obvious and lasting merit are the unique bright spot in boating that makes sense today―the only thing that is selling and rightly so―and the PAINE 14   and its larger sisters the LEVANT 15  and YORK 18 are the most beautiful examples of this emerging phenomenon. We believe the times are right for small, classy, easy to get going and transport, investment quality manageable sized yachts that unlike virtually anything currently available in fiberglass, will be loved for its entire lifetime by its owner and left to his kids and by them to their kids. With reasonable maintenance, they’re built to last that long.

She’s waiting… Whenever you’re ready.

The boating field today is experiencing a wholesale “flight to quality” and flight from consumer-crap. Do we still really believe that a molded fiberglass hull glued to a molded fiberglass deck, with ugly extruded aluminum spars, no varnished wood, and not an ounce of lead to keep it upright, cheap as that may be to produce and sell, is a yacht? An intelligent few of today’s water-lovers are choosing to spend their leisure time in something of intrinsic quality, beauty and unquestionable value. The PAINE 14 and its larger sisters provide the sensible alternatives that truly enhance the lives of those privileged enough to afford time spent aboard her, and their classic design will endure long enough to become a family heirloom.

Shallow draft, heavily lead-ballasted, with moderate wetted surface and a NACA-foil laminar flow keel, the PAINE 14   is delightfully fast and easy to handle, store, or trailer to a new destination every summer weekend.

A TRUE MINI-YACHT

In a single phrase, the PAINE 14 is “A TRUE MINI-YACHT.”  The yacht is light enough to be easily trailed behind a moderate sized automobile—no truck or SUV or surge brakes are required. The first one, named REDWING , was built in New Zealand.  The second one built― AMELIA , was built in America. Both now reside aboard motoryachts.

AMELIA aboard her mothership.

REDWING aboard her mothership.

At roughly 850 pounds she is light enough hoist easily with a boat crane.

A custom-fitted galvanized trailer with integral tongue-extender makes launching and retrieving a snap. And at 860 pounds, they can be easily handled by most shipboard boat cranes. The carbon fiber mast requires no stays and is simply swung up into a bronze retainer fitting in a matter of seconds. Unlike a Laser, or any other unballasted dinghy, she is impossible to capsize, and easy to sail mile after mile without athletic ability. You sit “in” her, not “on” her, and there is no need for “hiking out”—you sit on bench seats with properly angled seatbacks (coamings) at just the right height. In enough wind, of course, she could be swamped but has forward and aft flotation tanks to keep her afloat. And in the off-season she fits right into your garage where you can perform the yearly maintenance yourself at near negligible expense, and proudly show her off to your dinner-guests. Or if you lack the time or skills to maintain her yourself, the boatyard fees to keep her in Bristol condition will be so trivial as to make you laugh at the folly of owning anything much bigger.

UNSINKABLE, AND SELF-RESCUING.

Just how safe is a PAINE 14 ? To find out we conducted an intentional swamping to show you. Would she turn turtle, or go to the bottom? Chuck tried to swamp her by standing on the gunwale and leaning out as far as he could, hanging onto the mast. At 180 pounds and rocking the boat violently, the coaming tops could not be gotten close to underwater. Only by bailing the ocean in could he finally swamp her. She floated with the lowest point of the coaming 10 inches above the surrounding water, and was very stable. You could sit in the boat all day long like this and she would not sink. Though like Chuck, you might eventually decide to bail her out, raise the mainsail, and sail away.

You can watch a video of the intentional swamping by clicking here:

Amelia sinking

The performance of the PAINE 14 is, as one might expect from her numbers, downright stimulating. The helm is nicely balanced in both light airs and heavy. Its acceleration in a puff is amazing―in less than a couple of boat lengths it accelerates to hull speed. With the full jib and a reefed main, it can handle 15 to 20 knots of wind. And in stronger winds, she can be sailed under complete control without the jib―an extremely rare capability amongst today’s fleet of small boats. This is also helpful in picking up a mooring or coming alongside a dock or your larger yacht. You can roll up the jib first, clearing the foredeck and its mooring cleat of the nasty slapping jib-boom, and get safely cinched up with a clear field of view.

Those who have read Chuck Paine’s books on yacht design will recall that one of his bugaboos in the latter years of his career was self-rescue. If you fall overboard from even a yacht of low freeboard like this, it is impossible to get back aboard. You can imagine the potential consequences. So Chuck made the decision that no future design of his would lack this important capability. The PAINE 14 is fitted with a simple rescue step on the trailing edge of the rudder. You never know it’s there until you need it. But if you ever do, you’ll thank its designer a thousand times over.

The beautifully crafted rudder with its integral rescue step.

ONE PERFECT POSSESSION

We believe the ethic of filling multiple houses, then rented storage containers with unloved and unused material objects, with all of the environmental damage and unserviceable debt that this might entail, is in precipitous decline. The wiser among us will build their future lives around ONE PERFECT POSSESSION. For those who revel in exploring remote locales without the noise and expense of internal combustion, it’s time accept the reality of the 21 st century, rid yourself of that unused leviathan you can no longer afford nor find crew to operate, and join the renaissance in easily usable sailboats of eternal beauty. Though far from cheap, you can commission a PAINE 14 for what you pay in a few years’ maintenance and storage fees for your unloved and unused thirty-something foot white elephant, and you’ll actually USE your PAINE 14 , as will your progeny!

The yachts are available only in hand-built epoxy consolidated cold-molded wood. In any case the yachts will be beautifully hand-finished with a great deal of painted trim or varnished hardwood to look as beautiful of those from the past century.  French & Webb custom boatbuilders in Belfast, Maine, now have the rights to build a sistership for you, at a price of between $80,000 and $90,000 depending upon specification. A custom-designed galvanized trailer with integral tongue extender will enable the yacht to be easily launched on reasonably angled ramps. Its price is US$ 4500.00 plus shipping to your destination from Raleigh, SC. (Prices may change owing to inflation).

Todd French and his crew would gladly enhance your life and that of your progeny by building another for you. D0n’t hesitate― our federal reserve are seemingly unwilling to constrain inflation and the price will surely rise as a result.  Better to own and spend a lifetime enjoying a lovely sailing yacht today than have your wealth confiscated tomorrow.

Take her sailing in your PAINE 14 and you’ll make her smile.

No need for hiking in your PAINE 14 … just showing off.

Click here to see what SAIL Magazine had to say:

http://www.sailmagazine.com/best-boats/sails-best-boats-2014-paine-14

Further information may be obtained from:

CHUCKPAINE.COM LLC  P.O. Box 114, Tenants Harbor, Maine  04860-0114

Phone: (207) 372-8147

Email: [email protected]

This design is featured in both of my recent books; MY YACHT DESIGNS and the Lessons they taught me, and THE BOATS I’VE LOVED- 20 Classic Sailboat Designs by Chuck Paine. Both are beautiful, full colored, first class books which give you lots more information on this design, and can be purchased on this website.

Click here to read more about the Paine 14

A full set of study plans is available for $25 emailed to you in PDF format.

PDF Study Plans: $25- no shipping, sent via email

[{{{type}}}] {{{reason}}}

{{texts.summary}} {{#options.result.rssIcon}} RSS {{/options.result.rssIcon}}

{{{_source.title}}} {{#_source.showPrice}} {{{_source.displayPrice}}} {{/_source.showPrice}}

{{{_source.displayUrl}}}

{{{_source.displayDate}}}

{{{_source.description}}}

{{#_source.additionalFields}} {{#title}} {{{label}}}: {{{title}}} {{/title}} {{/_source.additionalFields}}

American 14.6

The American 14.6 Daysailer is definitely one of the best small sailboats you can find.  She is designed for the beginning sailor or those who are seeking a large, stable sloop that offers hassle-free sailing. This sturdy, deep-cockpit daysailer features a 6-foot 2-inch beam, fiberglass kick-up rudder, weighted fiberglass centerboard, and a large built-in storage compartment under the deck.  The large cockpit offers room for four adults with generous freeboard, comfortable seats and backrest, and includes locations for drink coolers or a battery box at the end of the seats.  The American 14.6 is also equipped with an advanced rudder system that can be raised or lowered from the cockpit and is designed to kick-up and spring down as necessary. The main and jib contain 112 square feet of Dacron sail which - combined with the wide beam, hard chine, and flat bottom hull - performs well in light breezes or a stiff wind.  The wide flat bottom hull shape also allows for minimal draft with the board up, approx 4-6".

Other standard features include color-coded main and jib lines, simple up and down colored lines for centerboard control, and a tabernacle mast allowing for quick stepping and easy retrieval at the end of the day.  Also included are motor mount bracket, hatch door for forward storage complartment, and a topping lift system.

This boat is constructed of hand-laid fiberglass with closed cell floatation and non-skid flooring in the cockpit. Anodized spars and Harken blocks among other quality parts assure years of maintenance free use for the new owner. The 700 lb. rated galvanized trailer, which includes a mast stanchion and winch, can easily be pulled behind today's smaller cars. Price package includes boat, sails, and galvanized trailer ready for a day on the water.

The American 14.6 is recognized as an extremely stable, roomy, dry, daysailer providing fun for all ages and we know you and your family will enjoy sailing this fantastic daysailer.

 Contact for current pricing and special offers.

American 14.6 Parts

Mast Raising Slide Show

Click on images to enlarge.

Marlow-Hunter, LLC

The 15 – safe and versatile for everyone.

High freeboard, a raised boom and sturdy FRP construction make the Marlow-Hunter 15 daysailer a safe, versatile boat that both families and greenhorn sailors will love. Designed with the novice in mind, the high sides, contoured self-bailing cockpit, and a comfortable wide beam will lend a confident feeling while under sail. When the kids take to the water, these same design elements will provide peace of mind for the parents as well. The Marlow-Hunter 15 is easy to trailer, rig and launch and will carry a crew of four. Whether you’re a seasoned sailor looking to bang around the buoys or a family on a Sunday outing, the Marlow-Hunter 15 is a fun, versatile boat that fits your sailing lifestyle! The fun begins at just $11,278 retail, however, ask us about our manufacturer’s discount and the savings currently available by buying direct!

Request a Brochure

Departments

Top Selling Products

• Copyright 1998-2024 SB Owners, LLC. All rights reserved.

• Policies | Contact Us

10 Best Sailboat Brands (And Why)

Last Updated by

Daniel Wade

December 20, 2023

‍ There's no denying that sailors are certainly a passionate bunch. We’re so passionate about our boats that we always try going for the best sailboats. To make it a lot easier for you, here are the best sailboat brands.

Owning a sailboat is an indulgence that many of us only dream about but very few ever have the privilege of sailing the seas in what they can actually call their own.

While there's nothing wrong with renting a sailboat, the honor of owning one is certain what many sailors dream of.

With a perfectly crafted sailboat as company, gliding through the water, waves, and wind brings some sort of unmatched comfort and peace.

Add this to the fact that sailing takes you far away from the daily hustles and bustles that we've become accustomed to in our daily lives and you'll see why the life of sailing is very appealing to the masses.

But without a proper sailboat, all this fun and the good life of sailing are thrown out of the window.

Contrary to the widespread opinion, owning a sailboat isn't beyond anyone's reach. It's something that we can all achieve. But before getting into that, it's important to know some of the best sailboat brands.

The best sailboat brands will make your life as a sailor a lot easier and more fun. The best sailboat brands have, for decades if not centuries, mastered the art of woodworking. They've dedicated their skills and immense amount of their time to designing and manufacturing nothing but the best quality of sailboats in the industry.

So if you've been looking for the best sailboat brands from all over the world, you've come to the right place. We'll discuss the best of the best, something that will give you a perfect getaway from your normal life.

Table of contents

‍ Must-Have Features for Your Sailboat

Before highlighting the best sailboat brands, it would be appropriate to jog your mind a little with some of the features that must be available in your sailboat.

Choosing a sailboat can sometimes be a matter of compromises. In other words, it's sometimes sensible to accept that a sailboat cannot have all the features that you desire.

As such, it's all about going with a sailboat that has the features that matter to you most.

For this reason, let's look at the most basic features that can make the difference in both safety and comfort while improving your sailing experience.

A Safe and Comfortable Sailing Cockpit

You'll most definitely be spending a huge amount of time in the cockpit. Whether you're keeping watch, trimming sails , helming, or just enjoying the scenery, there's no better place to do all these than from the cockpit. That being said, a good cockpit should have the following.

• Have a good depth for safety reasons and adequate drainage
• Should give you a quick and easy access to jammers, cleats, and other important parts of the winch system
• Should have a seat or seats that are about 35 cm high, 50 to 55 cm wide to provide ideal support
• The seats should be adjustable to offer maximum comfort and allow you to change your position

GPS Chartplotter

Use a GPS Chartplotter once and your sailing will never be the same without it. It not only allows you to map a course but is also a great way of ensuring that your sailboat exactly follows that course. It also gives you constant updates on ocean conditions, weather conditions , and potential hazards such as deadly currents and sandbars.

A GPS Chartplotter is also an important safety device that can help you in some very critical situations while out there on the water.

For instance, it has a man-overboard button that is essentially meant to allow you to receive coordinates of the exact location should someone fall off your boat.

Electric Winch System

This is an amazing addition to any sailboat. It allows you to sheet a jib even in high and strong winds with a simple press of a button. It also gives you the chance of trimming a mainsail easily while still carry out other essential tasks in the sailboat.

An electric winch system can be of great importance, especially if you're short on crew. This is because it can free up some crew members to carry other important tasks. In other words, it can make duties that would otherwise require more crew members a lot easier.

More importantly, an electric winch system can maintain safety even in the roughest of conditions, thereby preventing you and your crew from getting injured. In essence, an electric winch system will make your sailing a lot safer, less stressful, and more enjoyable.

Reverse Osmosis Watermaker

This is a very valuable accessory, especially if you're going on long sea voyages. You can spend days on end without drinking clean and safe water.

As the name suggests, you can use this accessory to turn seawater into purified drinking water. It uses the reverse osmosis method that's essential not only in removing bacteria and parasites from the water but also in turning the water into purified and safe drinking water.

Even though this device is pricey, it's a great way to mitigate the over-reliance on huge water tanks. All you have to do is to ensure that it's properly maintained and you'll have an endless streak of safe drinking water no matter where you are.

Wide and Clutter-free Deck

While the deck is often an overlooked feature of a sailboat, it can be the difference between a great sailing experience and a stressful one. In essence, the deck of a sailboat should be wide enough and clutter-free.

This is significant as it can enable you to quickly access different parts of your sailboat with hindrance or getting tangled. As you can see, this is particularly important in improving safety and reducing stress.

With that in mind, make sure that the deck is organized in such a way that you can have easy access to sails, masts, and winches.

You should, therefore, avoid sailboats with decks that are designed in such a way that you have to climb on top of the cabin just to access these features. Needless to say, this can be quite unstable and very dangerous especially when conditions are rough.

The Best Sailboat Brands and Why

1. hallberg-rassy.

Hallberg-Rassy is a Swedish yacht maker that's very well-known in the blue water cruising circles for making some of the highest quality and sturdiest sailboats. For many sailors, this is the number one sailboat brand as it offers absolute comfort, utmost safety, and good and easy handling.

This brand is not only synonymous with sturdy construction but you won't worry getting soaking wet while out there on the water. This is because it has a well-protected deck and cockpit, finished with nice woodwork, and has a powerful engine with a big tankage just to ensure that you can go on long voyages.

When designing its sailboats, this brand has made it a norm to add some features that stand out from the rest. For instance, the bowsprit is an integral feature that makes sailing a Hallberg-Rassy quite easy and much enjoyable. This is because it grants easy access to and from the deck. Its electric anchor winches facilitate smooth maneuvering. Even more, its large steering wheels makes it much easier to control the boat even in the roughest of conditions. In essence, this brand has features that provide good control and an extra sense of safety.

Although this brand has evolved over the years, you'll easily recognize it even from a distance. And why is this? A Hallberg-Rassy never goes out of style. This is a unique sailboat brand that has always stayed true to its principles and concept. No matter which part of the world you go, Hallberg-Rassy will remain the undisputed king of blue water cruising.

2. Nautor's Swan

For over 50 years, Nautor's Swan has endlessly raised the sailing levels by designing and manufacturing new sailboat models that not only push the boundaries but also meet that many requirements and demands of sailors across the world. Thanks to its wide range of seaworthy, timeless, elegant, and highly-performing sailboats, the Nautor's Swan remains one of the best if not the best sailboat makers in the world.

Based in Jakobstad, Finland, this brand has severally set the industry standard with its speedy and sleek models such as the Swan 48, Swan 65, Swan 98, Swan 78, and Swan 120. These models have one thing in common: they never compromise on safety. As a brand that puts safety first, it ensures that its models are made of foam-cored glass fiber and reinforced both with carbon-fiber and epoxy. In essence, Nautor's Swan is widely revered for its unmatched seafaring and safety records.

Additionally, Nautor's Swan models are incredibly responsive. You can easily tell this just by the feel of the wheel. This brand has models that will gracefully slice through the biggest of waves with ease. That's not all; the interior of these models that are very comfortable even when the going gets tough. This is, without a doubt, a brand that strives to create self-contained worlds with each model.

3. Beneteau

This is perhaps the most selling sailboat brand in the world. For over a century now, this brand has based its models in a combination of simplicity and performance. This is a brand that will serve you just right across all latitudes and in all circumstances. Whether you prefer the Oceanis Yacht 62 or the Figaro Beneteau 3, this brand will never let you down on all fronts.

This brand revolves around a simple concept of creating a link around the world. From the deck space to its design and light, this brand does everything possible not just to uniformly transform life at sea but also to open doors to new horizons in a very luxurious yet practical way. Its models are designed with clear deck plans, stable hulls, simplified maneuvering and interior materials and equipment that can be easily personalized.

Whether you're looking for a racing sailboat or something that's designed to explore and enjoy the world in the company of friends and family, Beneteau is a true combination of sensations and simplicity. This is a brand that brings to the seas fun, simplicity, smartness, toughness, safety, intuitiveness, as well as dazzling reinvention.

4. Amel Yachts

Based on the ethos of designing and manufacturing comfortable, robust, and easy-to-handle boats, this French brand has, for over five decades, offered sailors and other sailing enthusiasts the perfect opportunity to explore the seas with the utmost quality, comfort, and more importantly, safety.

Using 100% French know-how, this brand has brought to the sailing world some of the best boats such as the Santorini, the Mango, the Super Maramu, and the Maramu. We would be doing this brand total injustice if we said that they're distinctive. Truth be told, there's nothing comparable to an Amel model. Well Amel was and still is, the ultimate standard by which other sailboat models are measured.

From items such as electric winches and furling, to generators, Watermaker , and washing machine down to the simplest of items such as towels. Spare filters, bathrobes, deck brush, and a boat safe, the Amel is in reality with what the real life of a sailor is and should be.

Although some may say that Amel still has room for improvement in terms of specifications and personalization, it cannot be denied that the Amel is a serious brand that designs and manufactures complete boats. With this brand, you'll be guaranteed of a higher degree of reliability, safety, and an edge of fun while out there on the water.

5. Hinckley Yachts

Based in Maine, United States, Hinckley Yachts is a brand that has been building robust, luxury, and safe sailboats for more than 90 years now. In its sailboat class, you'll find several sailboats that have classic shapes, inner strength, dramatic lines, and features that are absolutely essential in dealing with the challenges of the North Atlantic.

This brand has been successful in integrating impeccable craftsmanship with new technologies to ensure that their models always stand out while articulating advanced sailing practices, timeless aesthetic, robust construction, and the utmost safety. Whether you choose the Bermuda 50, the Sou'wester 53 or any model for that matter, you'll never be short of advanced performance based on the best design and technology.

In terms of features, this brand provides sailboat models with modern performance hulls. These hulls are constructed with inner layers of carbon, outer layers of Kevlar, and are aligned with computer-designed load paths. Every feature is designed without compromising comfort.

To this end, this brand offers you a perfect combination of both fun and sail. This brand offers more than just sailing. Instead, it offers a unique sailing experience that's combined with the pure joys of sailing in the blue waters with an ease of ownership and maneuverability.

6. Oyster Yachts

If you've been looking for luxury more than anything else, Oyster Yachts provides you with numerous solutions. This British brand is widely known for manufacturing a wide range of luxury cruising sailing yachts. Its sailboats are among the finest in the world and are immensely capable of taking you to some of the far-flung places in the world without having to worry about high winds and hellish waves.

Whether you choose the iconic Oyster 565 or the immense Oyster 595 you never fall short of experiencing the new world like never before. These are models that will enable you to own your adventure, choose your destination, set your courses, pick your anchorage, and stay safe at all times. If you want to hold the wheel and pull the sail while feeling the tang of salt spray on your face, Oyster Yachts is the way to go.

This is, unquestionably, a brand that's meant for you if you want to explore the seas in comfort, luxury and utmost safety. From craftsmanship, sailboat design, to hull, deck, and keel configurations, everything is designed to allow you to circumnavigate the world in comfort, elegance, and style.

7. Tartan Yachts

Based in Fairport Harbor, Ohio, there's arguably no better to begin your sailing adventures than with a sailboat designed and manufactured by Tartan Yachts. With several award-winning designs and construction, this brand is widely known for providing easy handling, great performance, and an ultimately stable platform.

This brand always strives to deliver a unique and the best possible experience to every sailor. As a brand, Tartan fully understands that every sailor has his/her unique sailing needs. As such every component of their models is designed with engineering levels that guarantee optimum performance, excellent on-deck visibility, and luxurious interior.

From the Tartan 5300, the Tartan 4300, the Tartan 345 to the New 365 and the Fantail, this brand makes it a priority to ensure that its models are among the strongest, lightest, and more importantly, the safest in the sailing industry. In essence, this brand can be ideal if you appreciate performance. It has rewarding sailing features both in narrow water lines and wider passages. Add this to its easy handling and you'll have a top-notch performer in virtually every condition.

8. Catalina Yachts

As one of the most popular boat manufacturers in the world, this American brand is widely revered for building the sturdiest boats that can hold up perfectly well in real-world conditions. These are generally family-oriented boats that are intelligently designed to ensure that your entire family can have fun out there on the water.

Some of the models include the cruiser series such as the Catalina 315, the Catalina 385, the Catalina 425 while the sport series include the Catalina 12.5 Expo, the Catalina 16.5, and the Catalina 14.2 Expo. As the current winner of the "Boat of the Year" Cruising World, you'll rarely go wrong with a Catalina model.

It offers a wide range of sailboat sizes that suits your lifestyle. This brand makes it a priority to ensure that all their models are not only safe but offer the best ownership and sailing experience. If anything, this brand is widely known to have one of the most excellent resale values in the sailing industry.

9. Island Packet Yachts

From the IP 525, the IP 439 to the IP 379, the Island Packet Yachts is a brand that encourages its customers not to keep the world waiting. This brand is meant for sailors who want to explore the world in utmost comfort and safety.

The first thing you'll notice in an IP sailboat is its large aft deck. This is not only perfect for sunbathing but can also serve you well if you want an impromptu dinner with friends and family while out there on the water. The living space is also large enough to carry most of your belongings, which is an added advantage especially if you've been planning to spend longer periods in the seas.

With modern evolution and refinement, as well as proven features, this brand is known to offer sailors maximum comfort, luxury, and safety. You'll have better access to the cockpit, have enough space, and are excellently designed to provide superior seafaring and the best features to enable you to spend extended periods when cruising.

10. Sparkman & Stephens

For more than 90 years, Sparkman & Stephens has been at the forefront of the belief that sailboat excellence goes beyond hull lines and deck plans. Instead, this brand believes in excellent naval architecture, innovation, sophistication, and beauty. This is a brand that has laid the foundation of sailboat as a sport not just in America but all over the world.

These models have graced the world for decades and bring immense pleasure to their owners in terms of innovation, performance, and excellence. Though rooted in tradition, the brand has pushed sophistication, technology, and sailing experience to a whole new level. You'll be a proud owner of the Sparkman & Stephens model.

There you have it; these are the best sailboat brands in the world. Although there are several other sailboat brands to choose from, the-above described brands stand shoulder above others in terms of quality, safety, performances and luxury.

Hopefully, you're at a much better place when it comes to choosing a sailboat that suits your lifestyle, needs, and budget .

Happy sailing!

Related Articles

10 Best Sailboats To Live In

Common Issues With Hallberg-Rassy Sailboats

Common Issues With Catalina Yacht Sailboats

Common Issues With Island Packet Yacht Sailboats

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

December 28, 2023

Best Bluewater Sailboats Under $50K

Popular posts.

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

7 Best Places To Liveaboard A Sailboat

9 Best Trailerable Sailboats

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• 14 Foot Sailboat

14 Foot Sailboat Boats for sale

14 Foot Sunfish Sailboat

New York, New York

Posted Over 1 Month

Fourteen (14) foot Sunfish sailboat in excellent condition. Includes mast, sail, rigging, rudder, and keel board. Price includes two adult life jackets. Call 203-218-9058 to make an offer. Great for the upcoming beach season.

Shelton, Connecticut

14 Foot sailboat with trailer 6 person day sailor

Alanson, Michigan

Nice 1984 MonArk 14" sailboat with trailer. 59" beam. Double drop down keels for added stability This sailboat is clean, inexpensive summer fun. Has like new main sail, storm jib and jib (jib needs patch). Does have oar locks but needs new oars Holds up to 6 people or 775 Pounds. Tons of storage underneath seats One person can set up easily, takes about 15 minutes Comes with trailer, super light anything can pull Cash only please- call or text $750.00

Hobie Hunter HOLDER VAGABOND 14' Sailboat 14 foot sail boat "fresh water only"

Phoenix, Arizona

Make Hobie Hunter Holder

Model Vagabond 14

Length 14.0

Hobie Hunter HOLDER VAGABOND 14' Sailboat 14 foot sail boat used in fresh water only so condition is excellent with no corrosion etc.note first picture is for reference only. T the rest of the pictures are the actual watercraft you are buying.

30 foot Catalina 1982 Sailboat for Sale

Naples, Florida

New lowered price! I must sell my Catalina 30 1982 sloop currently moored at the Naples City Docks. The boat is in excellent condition and has had a recent survey by email. The boat comes with a 12 horsepower diesel in good working condition, depth finder, and auto helm. Also comes with a new radio, CP radio, 8 life preservers. The boat has a bimini in excellent condition. The boat has standing rigging that is under two years old. The engine was replaced approximately eight years ago. The dock is available as well for transfer. The boat has been professionally maintained and the bottom was painted less than six months ago. The bottom is currently cleaned monthly. Serious buyers only please. I am asking $14,999.00. I am in no rush to sell. Respond by email or call (917) 913-five four six six. Boat Slip available for $500/month. New Main Sail. Roller Furling Genoa in good condition. View over 80 pictures here: http://s1234.photobucket.com/user/rgj592004/library/serenity?sort=3&page=1

Aquacat sailboat

Charleston, South Carolina

14 foot sail plus trailer good condition. 843-530-2777 no PayPal please

Rhodes Bantam #1381 Sailboat, 14.5 ft. Mahogany. Restored 2008

Island, Kentucky

Length 14.5

Rhodes Bantam 14-foot of Honduran mahogany and African sapele plywood. A classic racing dinghy with lovely bronze hardware and wooden mast. Hull #1381, designed by Phillip Rhodes and built 2/1966 by Bill Kallusch Boats of Sodus Point N.Y.. This boat saw several years at Sodus bay (Lake Ontario) in New York. Later she was moved to Lake Champlain in Vermont for many years. She has sailed Kentucky Lake since 2006, infrequently of late due to owner being 28 years older than the boat... Restoration was completed in early 2008 included replacement of nearly all of the structural mahogany. Full treatment with CPES epoxy and 3M-5200 sealant allows the prospect of another 49 years of service. Three sails: main, jib and spinnaker all in excellent condition. Also included is a galvanized trailer. Boat is complete and ready to sail beautifully. Built for crew of two, with solo sailing accommodated. Hull is varnished inside and painted outside. The boat can be easily trailed as one person can lift and step the wooden mast. A great performing boat with beautiful traditional touches.

1982 S2 8.5A 28 foot Sailboat with Inboard Yanmar Diesel - In Racine Wisconsin

Racine, Wisconsin

Category Cruiser Motorcycles

Length 28.0

**** PLEASE NOTE: Because of the relatively low BUY IT NOW price, payment will be due within 24 hours via paypal. I will send you a paypal invoice after a successful "BUY IT NOW" or an accepted offer. Please only buy or offer if you have positive feedback. Your buy it now or offer constitutes a binding agreement to purchase so please ask questions BEFORE clicking "BUY IT NOW" or making an offer. After receiving your payment I will overnight you the title or meet you in person depending on timing and my availability.**** Very Nice S2 8.5A (28ft) for sale in Racine Wisconsin. I'm expecting a second child soon and really don't want to sell this excellent great lakes cruiser. Clean and clear Wisconsin title.Tiller steering. (always my preference)Inboard Yanmar diesel is extremely clean and fuel efficient. Recent full Yanmar service checkout since boat was last launched.Furling headsail in good shape. Newer mainsail in excellent shape.New Raymarine autopilot professionally installed. Shore power and long power cable. Halyards in good shape.New marine head and holding tank (never used). Chainplates recently professionally rebedded by boatyard. Interior in excellent shape.Solid fiberglass hull. All tabbed in joinery in excellent shape. Cored deck with NO soft spots. Very large cockpit.Includes steel cradle as well. I looked at everything in this size and price range in the lower half of lake Michigan for two years and this is the nicest boat I could find by leaps and bounds. Solid turnkey value. Launch is all ready paid for with the boat yard. You can be in the water tomorrow. No better deal can be found on solid and ready to sail Great Lakes cruiser with a clean inboard diesel - it is just time for me to move it along. Currently out of the water at Racine Riverside Marina in Racine, WI. Summer storage is paid through the end of this month and a launch is included in the purchase. If you chose not to launch until next season the storage rates at the Marina for winter are extremely reasonable and the pre-paid launch will still be yours come next summer. Here is a Review from "Practical Sailor" S2 8.5 MeterThe 8.5 is good for cruising the coasts in comfort and style--as long as you like the modern look.When Leon Slikkers founded S2 Yachts in 1973, much of the attention to detail that had previously characterized Slickcraft powerboats—Slikkers’ earlier boatbuilding venture— traveled with him to the new boatbuilding company. In the 13 years S2 sailboats were in production (S2 still makes powerboats), the company produced a variety of modern cruising designs from the board of Arthur Edmunds, all characterized by longish fin keels, freestanding spade rudders, straight sheerlines, and a staggering variety of draft options and cockpit locations. In the early ’80s, S2 reached more for the performance market with the Grand Slam series of small boats, and the 10.3 “offshore racer-cruiser.” These higher performance boats were designed by Scott Graham and Eric Schlageter, well known for their MORC and smaller IOR designs.The S2 8.5 is a 28-footer cast in the company’s traditional mold. Her hull dimensions, sail area, displacement, and general design characteristics put her square in the middle of the modern 28-footers such as the Tanzer 8.5, Newport 28, O’Day 28, and the Pearson 28.The boat’s styling is conventionally modern. She has a fairly straight sheer, fairly high freeboard, and low, raked cabin trunk with dark tinted flush ports. Production of the 8.5 ran from 1981 to 1983. The boat was replaced by the similar S2 8.6, which continued until S2 stopped making sailboats in 1986.ConstructionThe hull of the S2 8.5 is a solid hand layup. Glasswork is excellent, and is noted by owners as one of the main considerations in buying the boat. Gelcoat quality is excellent.Slight roving printthrough is evident, but it is not objectionable. Minor hard spots are visible in the topsides, probably caused by the attachment of interior furniture and bulkheads.The deck molding is cored with end grain balsa, giving a solid feel underfoot as well as providing reasonable insulating properties.S2’s hull-to-deck joint is the basic type that we would like to see adopted throughout the industry. The hull molding has an inward-turning flange, onto which the deck molding is dropped. The joint is bedded in flexible sealant, and through bolted on six inch intervals by bolts passing through the full length slotted aluminum toerail. The joint is also through bolted across the stem.All deck hardware is properly through bolted, although pulpits, cleats, and winches merely use nuts and washers on the underside of the deck, rather than the aluminum or stainless steel backing plates we prefer.Another feature of the hull-to-deck joint is a heavy, semi-rigid vinyl rubrail at the sheerline, quite aptly termed a “crash rubrail” by S2. This will go a long way toward absorbing the shock of the inevitable encounters with docks and the other hard objects that seem to be attracted to the topsides of the typical sailboat. Although this rail is black when the boat is new, it had dulled to a chalky gray on older S2’s we examined.The builder advertises “bronze seacocks on all through hull fittings.” These are not traditional tapered plug seacocks, but are ball valves mounted directly to through hull fittings. A proper seacock—whether it uses a ball valve or a tapered plug—has a heavy flange to allow through bolting to the hull. This is an important safety feature. Should a valve seize, it may become necessary to apply a great deal of leverage to the handle in order to open or close the valve. The deeply threaded through hull stem can easily break under these conditions, and more than one boat has been lost in this manner.We also suggest that seacocks be installed on the cockpit drain scuppers and the bilge pump outlet, both of which may be under water while the boat is sailing. Light air performance would benefit by the fairing in of the through hull fittings, particularly the head intake and discharge, both of which are far enough forward to have a significant effect on water flow past the hull.Ballast is a 3,000 pound lead casting, epoxied inside a hollow keel shell. We prefer an external lead casting bolted to the hull for its shock-absorbing qualities and ease of repair. This preference was reinforced recently when we examined an old Bristol 27 just sold by a friend. The surveyor noticed dampness near the bottom of the leading edge of the keel, which showed slight external damage. Probing the loose putty revealed some abrasion of the glass keel molding. In order to sell the boat, it was necessary to grind away a large portion of the glass at the front of the keel, dry out the ballast, and reglass the lead—a job that took several days of work and cost our friend a fair chunk of money.Much of the boat’s interior structure is plywood, glassed to the hull. Fillet bonding is neat and workmanlike with no rough edges to be found.Chainplates are conventional stainless steel flat bar, bolted to bulkheads and plywood gussets in the main cabin. These are properly backed with stainless steel pads. Due to the fact that the hull is lined throughout with a carpet-like synthetic material, it is not possible to examine the bonding of the chainplate knees to the hull. The stemhead fitting is a stainless steel weldment, through bolted to the deck and hull and reinforced inside the hull with a stainless steel gusset to prevent deflection of the deck from the pull aft of the headstay. We’d like to see a metal backup pad behind this fitting rather than the washers which are used.General construction is thoughtful and well executed, with excellent glasswork, a strong and simple hull-to-deck joint, and reasonably installed hardware and fittings.Handling Under PowerAlthough some early models of the 8.5 used a seven horsepower BMW diesel, the 1982 version employs an eight horsepower Yanmar. These small Yanmars are quite impressive, light in weight and far smoother than the company’s older rockcrushers.Because of the high freeboard and considerable windage of the 8.5, the standard engine is the absolute minimum power plant for the boat. Recognizing this fact, the company offered a 15 horsepower, two-cylinder Yanmar as an option. For another 75 pounds and $1,150, we would want this option on the boat if the ability to get places under power is a real consideration.The extra fuel consumption of the larger engine will scarcely be noticed. The 18 gallon aluminum fuel tank will probably give a range under power of over 250 miles—more than adequate for a 28 foot cruising boat.The fuel tank is located under the cockpit and is securely mounted and properly grounded. There is an easily reached fuel shut off between the engine and tank. Unfortunately, the fuel fill is located in the cockpit sole. Spilled diesel oil turns even the best fiberglass nonskid into an ice skating rink. Fuel fills should be located on deck, where spills can be efficiently washed away.Engine access is via a large removable panel on the inboard face of the quarterberth. This panel lacks any kind of handhold to make it easily removable, which will discourage regular checking of the engine oil. The top companionway step also removes for access, but it’s a long reach to the dipstick.There is no oil pan under the engine. It will be necessary to be very careful when changing oil to keep the bilge clean. We have yet to see anyone change oil and filters on a boat engine without spilling something.With the quarterberth panel removed, access for routine service is excellent. The quarterberth has remarkable headroom over, so that the mechanic will not feel like a trapped spelunker after a half hour of work. Engine removal will require some joinerwork disassembly.Handling Under SailThe S2 8.5 is no slug under sail. Her PHRF rating of 174 to 180 compares very favorably to other boats of her size and type. The Sabre 28, for example, has a rating of 198. The Pearson 28 about 195, and the O’Day 28 about 198.Part of this is no doubt due to the fact that the standard sails on the boat come from the North loft. While North’s OEM sails may not be the vertical cut Mylar-Kevlar wonders that adorn custom boats, they’re a lot better than most.S2 now uses Hall spars. The simple masthead rig is extremely clean, with airfoil spreaders and internal tangs. The boom features an internal outhaul and provision for two internally-led reefing lines, with cam cleats at the forward end of the boom.The deck-stepped mast is mounted in a stainless steel deck plate incorporating plenty of holes for the attachment of blocks. Halyards and Cunningham lead aft along the cabin house top to a pair of Lewmar #8 winches. Lewmar #16s are optional, but hardly necessary.The main is controlled by a six-part Harken rig mounted on the end of the boom, and a Kenyon traveler mounted on the aft cockpit coaming. This will work fine with the tiller-steered version of the boat. With wheel steering, the mainsheet is likely to be a nuisance to the helmsman.Because of the end-of-boom sheeting, a boom vang will be essential for full mainsail control. Ironically, the boat’s drawings show almost mid-boom sheeting, with the traveler mounted on the bridgedeck at the forward end of the cockpit. This is probably a better arrangement, although it heavily loads the center of the boom and requires more sheeting force.Owners of 8.5s have little but praise for the interior of the boat. The cabin has a wide feeling, created by pushing everything outboard. The “chart area” on the plan is a myth, as far as we can tell.Despite the fact that the shrouds are set well in from the rail, the boat lacks inboard headsail tracks. Rather, you are limited to snatch blocks shackled to the toerail track. A six-foot piece of track set inboard of the rail would be a useful addition.Standard headsail sheet winches are two-speed Lewmar #30s. Options include both larger winches and self-tailers, both of which are worth considering for either racing or cruising. The cockpit coamings are wide enough for mounting larger primaries and secondaries.The high-quality rig and sails add to the price of the S2, but they are additions well worth the cost.Deck LayoutThe deck layout of the 8.5 is clean and functional, with no toe stubbers to catch you unawares. There are two foredeck mooring cleats, but no bow chocks. The necessity to lead an anchor line well off the boat’s centerline, coupled with high freeboard forward, is likely to result in a boat which sails around on her anchor or mooring. The 8.5 has a pair of wide stainless steel chafing strips at the bow which will greatly protect the deck from the chafe of the anchor line.The 8.5’s foredeck anchor well is one of the best we’ve seen. It is shallow—just deep enough to hold an anchor and adequate rode. There are double scuppers, which offer less likelihood of clogging. The lid is held on by a full-length piano hinge, and there is a positive latch.The shallow locker well above the waterline means that water is less likely to enter through the scuppers, which can be a real problem with a deep anchor well. When the bow pitches into waves, a deep anchor well can fill with water, and if the scuppers clog with debris, you can find yourself sailing around with several hundred pounds of extra weight in the worst possible position. There is no provision for securing the bitter end of the anchor rode, but a big galvanized eyebolt installed in the well by the owner will solve that one.The running lights leave something to be desired. Their location at deck level just aft of the stem makes them vulnerable to damage when handling ground tackle. We much prefer an international style bicolor mounted on the pulpit, another two feet off the water: easier to see, and out of the way. Wiring for the running lights is exposed in the anchor well, and should be secured out of the way.A recessed teak handrail runs the full length of the cabin trunk, serving the dual function of heavy weather handhold and cabin trim piece. Its shape makes it far easier to oil or varnish than the conventional round handrail, although the wide, flat section seems somewhat awkward after years of grabbing round rails.The 8.5’s cockpit is the maximum size we’d want to see on a boat of this size. The T-shape is designed to accommodate the optional wheel steerer, yielding a somewhat odd layout for the tiller-steered version. A bench seat spans the aft end of the cockpit. Although this makes good seating in port, we doubt that you’d want anyone sitting there under sail: too much weight in the end of the boat. It does make a natural helmsman’s seat for wheel steering.The engine controls and instrument panel are also located at the aft end of the cockpit, and are basically inaccessible to the helmsman of a tiller-steered version.There are two lifting lids in the aft cockpit bench, giving access to a cavernous space under the cockpit. To be useful, dacron bags should be fitted to the inside of these lockers. Then, they’ll be handy stowage for spare sheets and blocks.There are comfortable contoured seats along each side of the cockpit, with a huge locker under the port seat. Although plywood pen boards somewhat separate this locker from the engine space under the cockpit, it would be far too easy for deeply piled junk to get knocked over the board and into the engine. This locker should be partitioned into smaller spaces unless it is to be used exclusively as a sail locker.The battery boxes, fitted at the forward end of the locker, could benefit from plywood or fiberglass lids to keep battery acid off gear which might find its way onto the batteries. The box is designed to take two batteries—one battery is standard—stored in plastic containers. A single lid covering the whole box would be more efficient.The huge cockpit will accommodate up to six for sailing, and eight for in-port partying. The cockpit seat bottoms are contoured, and the cockpit coamings slope outboard for more comfortable seating. However, the seats are both too narrow and too short for sleeping.The forward end of the cockpit is protected by a narrow bridgedeck. However, the cockpit coatings extend a full foot above the level of the bridgedeck, To block the companionway to the level of the top of the coamings will require leaving two of the three drop boards in place when sailing.Although there is moderate taper to the sides of the companionway, making it easier to remove the drop boards, it is still necessary to lift each board about five inches before it can be removed. This is far safer than many tapered companionways, where boards practically fall out if you look at them wrong. The companionway slide is one of the best we’ve seen. It’s a contoured piece of acrylic fitted with a convenient grabrail. It slides easily in extruded aluminum channels, and is fitted with a fiberglass storm hood. As on many boats, the aft cabin bulkhead slopes forward, rendering it impossible to leave the drop boards out for ventilation when it rains.BelowdecksOwners consistently praise the interior design and finishing of S2 sailboats. From looking at the 8.5, it’s pretty easy to see why.There are no exposed interior fiberglass surfaces except the head floor pan molding. The hull and cabin overhead are lined with a carpet-like synthetic fabric. While this will undoubtedly cut down on condensation, we at first wondered how this fabric would hold up over time. Inevitably, the hull liner and even the overhead will get wet. In freshwater areas, this is no problem. The water will eventually evaporate. In salt water, however, wet fabric never seems to dry. Salt draws moisture like a magnet draws steel. Since first seeing this boat, however, we’ve had good experiences with the fabric. Be sure, however, to get a good wet-or-dry vacuum to keep it clean.Interior layout is fairly conventional, with Vberths forward, and immediately aft, a full width head. The head can be closed off from both the forward cabin and the main cabin with solid doors—a real luxury in a boat this size. There is a large hanging locker in the head, and reasonable storage space for toilet articles.The word for the main cabin is “wide,” with the settees pushed as far outboard as they can go. Décor is a little heavy on the teak for our taste, but it is one of the better coordinated interiors we have seen. S2 had a good interior decorator.A fold-down dining table seats four. When folded against the bulkhead, it is held in place by a single latch, which makes us nervous.Neither settee is full length. The foot of the port settee runs under the galley counter, making it long enough for sleeping, although your feet may feel a little claustrophobic in the tiny footwell.The starboard settee is an unusual configuration. The aftermost 12" of the settee folds up to form an arm rest, leaving a gap between the end of the settee and the head of the quarterberth.Inexplicably, this gap is referred to on the accommodation plan as a “charting area,” although there is neither a standard nor an optional chart table. It’s sort of like the designer ran out of energy before completing the interior design.Over the non-existent “charting area” is the best electrical panel we’ve seen on a 28 foot boat. The panel has a locking battery switch, battery test meter, and a panel with room for 14 circuit breakers, although only half are installed on the standard boat.The space is welcome, since with the proliferation of marine electronics most electrical panels are woefully inadequate.Most quarterberths tend to induce claustrophobia. That of the 8.5 is more likely to exacerbate any tendencies you might have to agoraphobia. At last, a quarterberth which will not give you a concussion when you sit bolt upright in the middle of the night after your neighbor drags down on you in a wind shift.The standard main cabin sole is carpet-covered fiberglass. For an additional $325, teak and holly was available for the traditionalist. We’d want it. Unfortunately there is no access to the bilge in the main cabin. None. This is inexcusable, and could be dangerous. A few hours with a saber saw should solve this rather basic problem.The galley is workable and accessible, with no awkward posturing required to do the dishes. The sink gets an A+. It is a full nine inches deep, is large enough to take a frying pan, and mounted close to the centerline.In contrast, the icebox gets a C-. It is larger than normal on a boat of this size, but it drains to the bilge, has a poorly insulated top, and a tiny, uninsulated hatch without a trace of a gasket. Boo.Because of limited counter space, the two burner Kenyon alcohol stove is mounted athwartships, rather than fore and aft. This means that the stove cannot be gimballed, and that it is necessary to reach across the inboard burner to reach the outboard one. Given the fact that countertop gimballed stoves are usually dangerous, the lack of gimballing doesn’t bother us much. What does bother us is that if you want to upgrade the stove to something more functional, the limited space allocated will stretch your ingenuity.A fold down table at the end of the galley counter gives additional counter space, but it must be left up in order to use the port settee for sleeping.Roominess, excellent execution, and good color coordination are trademarks of the interiors of all S2s, and the 8.5 fits well into this enviable tradition.ConclusionsThe S2 8.5 is a good boat for cruising the Great Lakes or any coast in comfort and a certain amount of style. Her appearance may be a little modern for traditionalists, with her straight sheer and European-style cabin windows.Pricey? Yes, but when you look at the things that go into the boat—the rig, good sails, and a comfortable, well finished interior—the price may seem a bit less painful. You still pay for what you get.

1961 Sailboat Daysailer Day Sailor Fiberglass 19 Foot with Trailer and extras

Lindenhurst, New York

Vintage 1960's registered as a homemade 1961 Sailboat because there was no prior documentation. We have Registration current on this. Comes with trailer. This is 19' 16' sitting on the trailer extra 3 feet if you add the rudder. (I was told by a couple of other boat owners this is a Luger Leeward type boat and clarifying as above listed the extra 3 feet if you add rudder is where the 19' comes in 16' normally hope that clarifies and thank you to all who have reached out with information.) The hull is 6 feet wide, the Mast height sitting on top of the boat measures 19' 6" long. Has been outdoors covered, not in water since 2003. The boat will need some tlc, the outboard motor mount is rusting and will need replacement if you plan to put an outboard on it. It has a retractable keel, and removeable steel rudder. Has two sets of sails, that will need cleaning. Tons of extra boating parts, ropes, anchor, life preserver's, ship's bell, also included is electrical equipment to but in a bilge pump. All the lighting is there, but never hooked up. I will include a battery box for your intention to do the electrical. No outboard included. The trailer is included, the winch post is starting to rot apart, I do have a replacement post included with a new winch. Also tons of rollers for the trailer. The driver side tire just went flat it seams the rim has a hole in it, not sure it happened when I was positioning this for photos. The rim and tire will need replacement or repair. Sold as is as shown whatever else I have will be included. PICK UP ONLY AT MY LOCATION IN LINDENHURST LONG ISLAND NY 11757 ACCORDING TO MY AVAILABLE SCHEDULE. THIS IS NOT SHIPPABLE UNLESS YOU PROVIDE A TRANSPORTATION COMPANY TO PICK UP. The pick up and removal is buyer's responsibility Please see my various categories in my store, see the Boat items category for more like items. From a non smoking environment, for like items check out my personal category list on the left of any of my auctions. Payments AND pick up must be received within 5 days of auction end. IF there are ANY discrepancies receiving your items please contact me prior to any hasty bad feedback. Feedback will be given upon receipt of good feedback. Find me on Facebook and Twitter #dandeepop ORS Click Here to See My Other Auctions On Jul-24-14 at 20:27:59 PDT, seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back

48 foot Sailboat, Ta Chaio Ketch. Make and offer! MA NEW PICS

Milford, Massachusetts

Interior upgrade in 2007; 3 cabin arrangement and large U-shaped galley; private master cabin with centerline queen berth and private head; private v-berth with hanging locker and head; teak interior and cabin sole; louvered doors on lockers; clean and bright overhead; two showers and 3 hanging lockers; dressers for folded clothes storage. New Helm, 3 winches rebuilt, new exterior chainplate, all running rigging replaced, all teak stripped and refinished, new bilge pump, new hot water heater, new vhf and antennanew engine lift pump, water pump, raw water pump, belts and alternator. Many other new items, repairs and repalcements, recent hull survey completed in May 2012.Very safe and comfortable sailboat. Easily sleeps 5 and is legally registered to have charters for up to six persons. Gusto" Is an incredibly well founded safe and comfortable vessel. She has made trips from Boston to Central America and back several times. She is a full keel vessel that offers a high degree of stability and comfort in any seas The below is my last survey May 30, 2012 Yacht Survey and Condition Report At the request of Mr. Peter M Licnikas the undersigned surveyor conducted a condition and valuation survey of the yacht “GUST-O” a 1978 48 ft Mermaid Ketch sailboat as it lay on jack stands at Yankee Landing Marina Merrimac St, Newburyport, Ma 01951. Name: GUST-O Year: 1978 Builder: Pali Shiang Taipei Hsien, Taiwan Model: Mermaid 42 Ketch Documented: 624951 Hull ID: TAC420251278 Dimensions: LOA 48' LOD 42' Beam 12’2” Draft 6’3” Displacement: 14 net tons Type: Sail Intended Use: Pleasure Hull Graphics and Color: White hull, green bottom Estimated present Value: $71,200.00 Estimated replacement value $245.000.00 Scope of Survey: The purpose of this survey was to estimate the current market value and marine risk evaluation. The survey of this vessel is based solely on careful visual and non-destructive inspection of all accessible portions of its structure and available equipment. Complete inspection can only be made by removal of soles, decking, headliners, ceiling or hull lining, tanks, and joiner work. Complete inspection of machinery, auxiliaries, piping, tanks, systems, electrical wiring, electrical and electronic equipment can only be made by continued operation or by disassembly. This would be damaging in nature and prohibitively time consuming, and therefore was not done. This vessel was surveyed while in lay up at Yankee Landing Marina, Merrimac St. Newburyport, Ma 01951. I visually inspected all sections of the vessel and its equipment detailed in this report. General Description: This hull is a reinforced fiberglass molding hand laid up using alternate layers of mat and woven roven with polyester resin. It is stiffened with web floors, bulkheads and joinery flanges. The hull design incorporates a molded lead filled keel and rudder for ballast. The hull is heavily built and is rigged as a Ketch designed for sail with a 45’ main mast, and 25’ mizzen mast. Bottom: Underwater surfaces were smooth and fair with no signs of damage or recent groundings. The bottom paint was in fair condition. I sounded the entire hull with a phenolic hammer and found no voids, blisters or delamination. I also placed an Electro-physics moisture meter on the hull and found it to be in the acceptable dry range with readings of 15 and less. Through hull fittings were all bronze and appeared original and in good condition, however none were removed for inspection. I observed several through hull fittings that were plugged or partially blocked by barnacles and growth. I recommend the fittings be cored out. The keel is lead filled for ballast rated 9400lbs. The propeller shaft is a 1” in diameter stainless steel supported with a rubber stern bearing with an external housing, all in good condition. I placed a target on the shaft and rotated it. The shaft tracked true within visual tolerances. The rudder is supported at the top with a 1.5” bronze shaft. The shaft and bearings turned smoothly with no signs of wear. Boot top up was white epoxy paint. The paint was in overall good condition with only minor scuffs. I observed one deep scratch on the starboard side that I recommend be repaired to prevent moisture intrusion into the underlying fiberglass. Topsides: Topside teak wood has been removed and replaced with fiberglass with non skid. The topsides were in good condition solid with no signs of moisture or rot. Cabin ventilation is through four Lexan covered 24”X24” teak hatches and four brass 6” air scoops. The life rail was rubber coated stainless steel cable with stainless steel stanchions. All stanchions were well secured and solid. All cleats were stainless and wood in good condition well bedded and solid. The rub rail is teak in good condition. Tanks: The two fuel tanks were rectangle in shape located under the cabin sole. The tanks were aluminum and well secured with proper fill and vents and rated at a total of 88 gallons. Water tanks were rectangle in shape and located under the cockpit sole. The tanks were well secured and fitted with proper vents and fill. The tanks were rated at 110 gallons. Spars & Rigging: Masts and booms are constructed of wood and appeared straight and in good condition. Both masts were rigged with no stretch stainless steel cable and turnbuckles. All rigging was in good condition well secured to the hull and properly tightened. The masts were in need of new paint. Hull Interior: Below decks I removed loose floorboards, opened lockers, and removed drawers for the best inspection of the hull interior and bilge area. I found all bulkheads to be secure with no signs of stress or damage, and the bilges to be in need of a minor cleaning. The interior was finished in custom teak in good condition, and consisted of a V berth forward with full head and shower. To the rear was a salon area consisting of a bench seat on the starboard side and a dinette on the port side. To the rear of the dinette was a galley consisting of a 4 burner natural gas stove with oven, ice box, and double stainless steel sink. The starboard side contained a large chart table with electrical panel. To the rear was a second full head on the starboard side and large master stateroom with queen size bunk. Bilges where sited were generally clean. Bilge pumping was with one super gulper manual pump in the galley. Along with a 12v rule 1500 main pump, and a rule 1000 backup. Steering on board is a pedestal center post with a 3’6” wheel turning a Sea Star hydraulic system rated at 1000 psi. Electrical: The vessels electrical supply is both 120ac powered by a shore power cord only, and 12v. The shore power only powers several outlets. All AC outlets were GFI protected except the outlet near the chart table. I recommend that outlet be changed to a GFI outlet in accordance with ABYC recommended practices. The 12v system not powered up at this time. The 12v wiring was well run, secured, and appropriately sized with a breaker panel and battery selector switch mounted above the chart table in accordance with ABYC recommended practices. The 12 v system was powered with three 800 amp combination starting/house batteries and one 1200 amp and 1000 amp dedicated house batteries. All batteries were in acid proof boxes and well secured located under the aft bunk. Fire Protection: Fire extinguishers consisted of four BC size I. Propulsion Machinery: The yacht power is from a 1978 Perkins 4108 diesel rated at 80 hp. The engine has a 60 amp alternator for charging the starting and house batteries. Engine compartment ventilation was through two 3” intake and exhaust. Engine mounts bolt to steel I beam beds with no apparent signs of movement. Fuel lines are copper hose in good condition. Engine seawater intake is through a bronze ball valve with sea strainer. Engine exhaust is direct to the transom through rubber hose. Fuel filtering is with a Racor filter/water separator in good working order. Lube oil was clean and filled to the proper level. Engine was not running at this time due to winter layup. Engine controls were mounted in the rear cockpit with a single throttle/shift lever with push pull cables. The cables functioned smoothly and were in good working order. THERE IS NO WARRANTY GIVEN OR IMPLIED FOR THE FUTURE USE OR LIFE OF THE ENGINE DESCRIBED HEREIN. Ground Tackle: Ground tackle on board consists of a 40 lb plow type anchor with a good lead of chain and of 5/8” nylon anchor rode. Sail Inventory: 1 mizzen sail 1 mainsail 1 130 jenoa Electronic & Navigation Equipment: Garmin 3210 Plotter/sonar/weather Standard Horizon digital depth sounder Cobra Marine VHF radio Sony Am/Fm/Cassette stereo 1 Ritchie compass Safety Gear: 4 12 gauge Arial flares 8 Type I adult life vests 1 Type V throw ring 3 Type III adult life vests Horn/bell/whistle Conclusion: Overall this vessel appeared very well maintained and in good condition for its age and class. As seen, this vessel would be a considered a suitable marine risk for its intended use of inland, bay, and near costal operation provided all (*) recommendations are complied with, and all U.S. Coast Guard safety equipment is properly fitted. The estimated value was based on the average selling price of vessels of this size, type, construction, condition, and age, with all equipment and accessories observed aboard. This value is based on personal knowledge and experience with the present sales market, along with listings on the internet, references, resources, and publications available to this surveyor, and is represented as our best opinion with available information. This survey has been prepared and submitted in good faith. It is understood and agreed that the services rendered by Capt. Craig Poirier Master marine surveyor as the attending surveyor, were performed to the best of our ability. Any reports furnished either oral or in writing, are accepted as our opinion and best judgment. They are not in any way intended as a representation or warranty as to the condition of the vessel or any of its parts. It is further understood and agreed that the attending surveyors of record will not be responsible for any loss or damage direct or consequential arising out of the condition of the vessel, or by any error or omission on our behalf as surveyors. This document is for the sole use of the person contracting for and named in this survey. Payment and/or use of this survey report constitute acceptance of these conditions. This report is based on over 30 years of Marine experience and membership with US Surveyors Association (MMA Master Marine Surveyor), Association of Certified Marine Surveyors (CMS Certified Marine Surveyor), International Association of Marine Investigators (CMI Certified Marine Investigator), and USCG licensed 100 ton Master Mariner. Member ABYC. All surveys done to ABYC and NFPA codes.

1987, 27' PEARSON 27 SAILBOAT

Marco Island, Florida

1987, 27' PEARSON 27 SAILBOAT Single Diesel UNIVERSAL 12 HP Price: $14,000 VESSEL WALK-THROUGH: If you are ready to get out on the water for some fun sailing adventures, you will be real impressed with the overall condition and value that this PEARSON 27 footer has to offer! Some of the many features include; a spacious cabin; galley with two burner counter top alcohol stove; stainless steel sink; privacy head with sink and shower; 3 cubic foot cold box refrigerator; teak bulkheads; molded fiberglass headliner; teak and holly sole (varnished) on centerline and offers 6' 5" of headroom. SAILS; Mainsail with Reef Mainsail and Geneo Jib (130%) in good condition. The mast height is DWL 38' 0". She also features Two #30 Lewmar Self Tailing Winches; Two New (2014) Group 27 Batteries and a Hummingbird Depth Finder. REMARKS: Call today to view this PEARSON 27 SAILBOAT in person. She's priced to sell fast and will not last long on the marketplace, so don't delay! To view more photos and the full vessel specifications, visit the FEATURED LISTINGS page at GoldenGateBoatSales.com CONTACT: Jerry Chiappetta, Jr. PHONE: 239-430-BOAT(2628)

1980 REBEL SAIL BOAT 14 foot fiberglass Yellow & White & trailer And paperwork

Galena, Illinois

Model REBEL

Category Daysailer Sailboats

Up for sale in Galena Illinois is a very good condition 14 foot rebel sailboat always stored it in the garage I have the title for the trailer and boat Comes with a trailer and a white sale and wood Rotter The boat has two storage compartments Please call Larry about possible delivery at 815 541 5330 thank's

Columbia 8.7 Sailboat ready to sail - recent refit

Manchester, Connecticut

Make Columbia

Length 29.0

0 0 1 82 469 AAA Allied Group Inc. 3 1 550 14.0 Normal 0 false false false EN-US JA X-NONE 1976 Columbia 8.7 (called a Widebody - Supercruiser) This sailboat was purchased by me from the pervious owner who sailed it for 33 years. It was my first sailboat after owning powerboat most of my life. I like to restore things so we did an extensive refit with many upgrades, some of which are listed below. I also have all the documentation, manuals and full descriptions of exactly what was dome to the boat during the refit. 29 feet/10 foot beam, Universal M-18 Diesel (700 hrs estimated), Harken furling, electric head and holding tank, dripless shaft seal with new shaft & prop. All new teak wood inside, new companionway (Lexan), perch seats, new Sunbrella cushions, new dodger and sail covers, new stove, pressure water, new aluminum water tank, new port lights (lexan) Sobstad main,150% Genoa (good condition) new main and jib halyards, all interior coverings are new. AGM batteries, all new LED interior lights. This boat is completely refurbished and ready to sail. The boat is presently on the hard at still winterized at my local yacht club and was last used in the fall of 2014. It is seaworthy and is open for inspection. The hull is in good shape without blistering. The gelcoat is shiny and the deck has been refinished (see pictures). I also have an extensive overhaul picture library for anyone interested. The deck is sound with no soft spots although it is 40 years old and there is some dampness in the cored deck as well as the rudder but nothing that will prevent this boat from safe operation. Sails are original but in excellent shape and have been cared for by a local sailmaker.I'm interested in serious buyers only and the boat is for sale locally so I reserve the right to end the auction early.Thanks for looking! Please feel free to research the brand and this particular model - interesting history and well documented performance. It will not dissapoint for someone looking for a solid, entry level sailboat with a diesel engine.

2014 American 14.6

St Petersburg, Florida

2014 American 14.6 The American 14.6 is designed for a sailor who are seeking a large, stable sloop that offers hassle-free sailing. This sturdy, deep-cockpit daysailer features a 6-foot 2-inch beam, glass kick-up rudder, weighted glass centerboard, and a large built-in storage compartment under the deck. The large cockpit offers room for four adults with generous freeboard, comfortable seats and backrest, and includes locations for two drink coolers at the end of the seats. The hull is designed to be 80-percent self-bailing, and floats high in the water with a minimum 4-inch draft when empty. .This boat has been sails 3-4 times and is like new condition Includes Like New  - American 146 sailboat with roller furling jib, transom ladder, boat cover, mast float, trailer and Honda 2.3hp

Morgan WEST INDIES 36 SAILBOAT...Beautiful... in St Pete Fl.. EXTENSIVE refit

St. Petersburg, Florida

Make HERITAGE YACHT CORP

Model Morgan WEST INDIES 36

Length 36.5

Gorgeous, ...over 65k spent on refit....***1996 Perkins M30 fresh water cooled diesel***, low hrs. starts runs, excellent, no smoke, new oil and filter perkins m30 owners manuel Brand new bottom paint, 3 coats...12/2016, @ $2000 Built and designed by Charlie Morgan in Clearwater Fl. hull #4 of 40 built 36.5 feet on deck....38 feet overall length Heavy, thick hand laid FG hull and deck, combined with original robust construction... FAR EXCEEDS standard sailboats such as: islander, catalina, irwin,pearson, columbia, hunter, ericson etc... 11, newer solid Stainless Steel ports. 2 newer SS Lewmar deck Hatches. all new running rigging. newer ss Norseman cones all around custom SS mount mid boom mainsheet track with all new blocks '14 newer turnbuckles oversized lower shrouds internal halyards ***2014,... new (5) thick oversized massive SS electropolished chainplates. ... external lead keel dropped: new SS studs and bolts, and new SS backing plates, then rebed...new SS awthwartship stringers thrubolted under cabin sole...along with new SS mast step..rudder dropped, new rudder gland with new packing, new steering quadrant, new SS rudder boss, new steering cables....2014......all these above;...exceptional, laborious, expensive, extensive comprehensive metal refits. .****. seperates this vessel from just about any other vessel from this era....truly an incredible update refit..., on a deserving, thick , strong hull and deck..**** ..she's ready for another 50 years of service....*** an outstanding, capable sailing vessel...virtually one of a kind...! Pride of ownership evident Throughout!... mast rewired '14 new masthead tricolor light new mast mount foredeck light deck completely stripped of all hardware and Imron jet aircraft painted 2007, topsides and deck; with blue cove and boot stripes, shiny and beautiful...bulletproof...$600/ gallon,...yet another major, massive Expensive upgrade...update... new 2014 Garmin 740s color , touchscreen GPS navigation station vhf radio, stereo CD, dual speakers all new hoses and ss clamps on 1996 Perkins diesel engine and exhaust new engine water pump, 2014 merely 1100 hours,( low hrs.) on 1996 Perkins M30 diesel, ....runs, starts excellent, no smoke. new oil and filter on engine 12/16. new 1" thick engine room insulation /sound deadening new Raycor fuel filter plastic 28 gallon fuel tank, engine burns 1/2 gal /hour @ 6 knots cruise. 2 plastic water tanks, 80 gallons water total new cutlass bearing and shaft packing, '14,... 3 blade prop new 6 volt golf cart batteries,235 amps,... new deep cycle 12 volt engine start battery 135 amps.... 10/16 Pro mariner 20 amp 3 bank automatic battery charger new hi output 95 amp alternator and belt 6/16 new LPG princess 3 burner SS stove and oven new xtra custom cockpit scuppers with bronze valves, '14,... total 4 scuppers in cockpit new cockpit cushions '14 Teak cockpit floor grate, with blue canvas cover new canvas '14; to include... mains'l cover, hatch covers, new bimini top, new custom main compainionway hatch cover,... teak grate cockpit floor canvas cover. all new interior cushions '14 Excellent Lavac vacuum head, manuel, with 15 gal. plastic holding tank. 7 cu ft ice box with '90's engine driven grunert refrig freezer with holding cold plates, 1/2 hp compressor, needs work or replacement. newer stem head backing plate. CPT wheel autopilot, excellent 2009, over $2100 when new... new masthead windex '14. Simply, a magnificent well found sailing vessel, visually appears to be about 5 yrs old....Stunning,... everyone who sees her compliments her classic beauty. 55ft mast, 695 sail area yields excellent sailing performance, sails and rigging in very good condition.. 36' 5" on deck, 38 ft. overall, 4'2" draft, centerboard delete, trunk filled with 300lbs.lead and epoxy then sealed, Large rudder with large full skeg,.. 7300 lb.external lead keel,..17,000 lbs. dry unloaded...20,000 lbs. cruise loaded.... 12 ft beam,...* 32 foot long waterline.... sturdy , stable, stout, solid and strong... ..capable of sailing anywhere in the world.. USCG documented vessel,... no liens , privately owned outright. twin anchor rollers on extended spit, thus 38 ft overall, with dual hawse pipes and 2 anchor rodes with chain, 35 lb, cqr anchor. custom cockpit table/box stows 2 10lb LPG bottles and more newer inner forestay and running backs, cutter rig can be an option. or storm foresail hanked on. Airmar 200wx wx nav station, with masthead sensor, 2014 Airmar DT 800 bronze tranducer with 20 degree forward look 2014 16000 BTU marine Airconditioned,... cools excellent in summer Fl. heat 2014 ;NMEA 2000 wiring... for plug and play electronics and accessories SS Dodger frame included,no canvas though new marine 6 gal water heater,w new hoses new shower sump box with dedicated pump new cabin floor,..3 epoxy barrier coats applied , then 3 coats of bottom paint, no blisters. This vessel would have an Impeccable survey should you wish to have one...truly,... a one of a kind find...This boat has no rot, no rust,no blistering of any kind,... anywhere.. All bulkhead taping to hull is as the day she left the factory!... the interior frp liner/headliner is thick, solid strong and shiny!! 6' 4" headroom all interior cabinets and storages, cleaned and painted with quality superhard mildew mold resistant white exterior paint. CLEAN....! the bilge in this boat is...clean This boat has a cameo appearance in the 2011 Hollywood movie "Dolphin Tale" filmed in Clearwater FL. Kris Kristofferson lives on her in this acclaimed flick. The sailing photo is of this actual vessel taken after Imron paint. knowledgable, experienced, x captain, liveaboard cruiser, x boat builder, rigger; older private seller/sailor,.... needs no brokers or help in selling this fine boat,... whatsoever! over 800 labor hours of love and attention in the past 19 months, and it shows. She is exactly as pictured! Exceptional!... replacement cost? conservatively... $95,000 +, estimated professional survey value $64,000+...realistically priced at $36,500. numerous tools, spare parts, chart kits, hardware, screens , literature, magazines included in sale. she appears ....exactly.....as she is in the pictures....! looks better in person actually...a fine little ship... buyer responsible for vessel pick up in St Pete. Florida she could be kept at the same non liveaboard private house dock. she needs dodger canvas cover for supplied ss frame, fridge install, windlass (if your not younger) 1 more anchor bad back/disc forces reluctant sale..this is my dream boat; wanted to sail the Bahamas/Caribbean again...physically can't... more pictures available upon serious buyer phone request. also for sale at: sailboatlistings.com and Tampa Craigslist [email protected] seller, [email protected] not responsible for any shipping , buyer pays for any shipping costs. buyer must make full payment within 3 days. On Jan-19-17 at 07:26:36 PST, seller added the following information: The boat can be kept at its current dock/slip in south st pete fl. On Jan-19-17 at 12:26:10 PST, seller added the following information: Listed on SailboatListings.com

Narrow Results

Current search reset all.

• Keyword: 14 foot sailboat
• Columbia (2)
• HERITAGE YACHT CORP (1)
• Hobie Hunter Holder (1)
• J Boats (1)
• Cruiser Motorcycles (5)
• Sailboats (2)
• Daysailer Sailboats (1)
• Florida (7)
• Connecticut (3)
• New York (3)
• Massachusetts (2)
• Michigan (2)
• Arizona (1)
• California (1)
• Illinois (1)
• Kentucky (1)
• South Carolina (1)
• Washington (1)
• Wisconsin (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

1988 Raven 190

Lake Havasu City, AZ

1988 Three bouys Sunseeker

Windsor Heights, IA

2014 Moomba Mojo

Observatory, PA

2013 Axis A22

Bennington, NE

2011 Yamaha SX 210

Mesquite, TX

2013 Carolina Skiff 198 DLV

Cleveland, OH

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

Covers by Sailboat Class