sailboatdata ericson 25

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

How Dangerous is Your Shore Power?

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

Gonytia Hot Knife Proves its Mettle

Where Winches Dare to Go

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

Remarkably roomy for such a small boat, the 25 is well finishedand offers enough performance for racing.

Just a few years ago, the prospective buyer of a 25′ sailboat knew that some serious compromises awaited him. His 25-footer would probably have little more than sitting headroom, might have four shelves that could reasonably be called berths, and probably had a head stowed under the forward berth. The galley? With luck, a two-burner alcohol stove, maybe a sink, and a water tank holding ten gallons.

Auxiliary power? Usually a 6 hp outboard hanging off the stern or in a well in the lazarette.

With today’s economy, more and more people who once might have considered a 30-footer are downscaling their size expectations to something more realistic, perhaps a 25- or 27-footer. While they may downgrade their expectations in terms of the length of their boats, they have not downgraded their expectations in terms of the size boat they want. This is not the contradiction it may seem. The fact is that there are a number of boats less than 27′ in overall length that offer room and features akin to those offered in older 30′ boats.

For better or worse, economic reality has forced many of us to downsize our boat expectations in much the way we downsized our automobile expectations.

Then came a new generation of small cruising auxiliaries. The modern 25′ “family” sailboat has 6′ headroom, berths for a family of five—if privacy isn’t a high priority—enclosed head, and perhaps an inboard diesel engine. A regular miniature yacht.

The Ericson 25+ is a good example. The proof of the popularity of this concept shows in the numbers. Over 660 units were built in the first three years after the Ericson 25+ was introduced in late 1978.

Designer Bruce King had a long and successful relationship with Ericson Yachts, starting with the Ericson 23, 30, 32, and 41 of the late 1960s. He has not been exclusively an Ericson “house” designer—witness the magnificent Herreshoff-inspired 90′ ketch Whitehawk to his design—but the vast majority of Ericson boats came from his board.

Bruce King and Ericson found a formula not unlike that of Bill Shaw and Pearson: build a wide range of boats of similar type in two to three foot increments, develop customer loyalty, and watch the customers move up through the ranks. Keep the really popular models, such as the Pearson 35 or the Ericson 35, and bring out other models every few years to catch the latest trend. That formula worked whether you were on the East Coast or the West, and like Pearson, Ericson had the formula down pat.

With the exception of a few forays into the cruising market with the clipper-bowed Cruising 31 and the Cruising 38 (later to be called Independence), the Ericson formula produced a well finished cruiserracer with good sailing characteristics. The Ericson 25+ was part of this successful formula.

Construction

The hull of the Ericson 25+ is a solid hand layup. A molded fiberglass body pan is glassed to the inside of the hull, functioning as the base for much of the interior furniture and adding a certain amount of rigidity to the hull. The deck, cockpit, and cabin trunk molding is balsa cored, with plywood replacing the balsa in high stress areas such as under the deck-stepped mast and where deck hardware is mounted.

Exterior glasswork is of good quality, with little roving printthrough, Gelcoat work is good.

The hull-to-deck joint depends on a secondary chemical bond. Both the hull and deck have an external molded flange. Glass-reinforced polyester resin is used as a bedding compound between these flanges. The inside of this joint is then lapped with four layers of fiberglass mat and cloth. This joint is covered on the outside by a plastic extrusion with a soft plastic insert which functions as a rub rail. We prefer a mechanically fastened hull-to-deck joint, because the strength of secondary chemical bonds is very difficult to evaluate.

The deck of the 25+ has a remarkably solid feel thanks to its cored construction. Neither the deck, cockpit, nor cabin top had any of the sponginess frequently associated with small boats.

Deck hardware of the 25+ is well mounted. Stanchions, pulpits, cleats, and winches have adequate aluminum bearing plates. The tiller head is a substantial chrome-plated bronze casting, The transom is plywood cored, greatly adding to its rigidity.

The mast of the 25+ is a black, deck-stepped extrusion. The stainless steel mast step looks surprisingly fragile. Because the mast is designed to be owner-stepped if desired, the forward lower half of the base of the mast is cut away to allow the mast to pivot forward for lowering. We doubt if there are many owners who will step their own masts. The design of the mast step to facilitate raising and lowering has greatly reduced the bearing surface of the heel of the mast.

In contrast to the mast step, the shroud chainplates are of surprisingly heavy construction. The 25+ utilizes Navtec chainplates, shroud terminals, and turnbuckles. Chainplates are strongly tied to the hull.

All through hull fittings below the waterline have Zytel valves, a reinforced plastic. Most have double-clamped hoses, but the icebox drain hose has a single clamp. Although modern plastics are strong, we suggest that you carefully inventory through hull fittings, as they are a major culprit in many sinkings of otherwise undamaged boats. Plastic valves may be immune to electrolysis, but they cannot be forgotten any more than bronze seacocks can be ignored.

Handling Under Sail

Despite the chubbiness of the 25+, owners report that she is a fast boat under sail. There are a number of features that contribute to this speed, She has minimum wetted surface, despite a displacement that is average for her overall length, though fairly light for a waterline length of almost 22′.

The Ericson 25+, 28+, and 30+ all feature Bruce King’s trademark, the “delta” fin keel. King states that this keel form has very low induced drag, and the 25’s performance reinforces his belief. The optional shoal draft keel reduces draft a foot, reduces lateral plane, and no doubt reduces windward ability, Unless you are bound and determined to have a boat drawing under four feet, by all means get the deeper draft version.

The rig of the 25+ is a high aspect ratio 7/8 sloop rig. The mainsail hoist of 31.5′ is unusual for a 25′ boat. In light air, tall rigs are usually faster, and we would expect the boat’s best point of sail to be upwind in light air. Since a great deal of the sailing in the world seems to be upwind in light air, this approach to the rig is a rational one.

With the addition of a backstay adjuster—easy because of the split backstay—it is possible to induce a reasonable amount of mast bend to control sail shape. A full width mainsheet traveler mounted on the cockpit bridgedeck greatly enhances mainsail control.

Shroud chainplates are set well inboard, allowing narrow headsail sheeting angles. The genoa track is also located inboard, almost against the cabin side.

There is no main boom topping lift, We think this is pretty indefensible on a cruising boat, and despite the additional windage, a topping lift is greatly to be desired on a racing boat. Without a topping lift, reefing becomes a real exercise in agility. Dropping the mainsail is greatly complicated, especially when cruising shorthanded. Should the main halyard break when sailing close hauled, the main boom could brain anyone sitting on the leeward side of the cockpit.

Two-speed Barient headsail sheet winches were standard in later boats. There is room on the cockpit coamings both for the addition of secondary winches for spinnaker handling and the replacement of the standard winches with larger ones. A single halyard winch is mounted on the mast, There is no main halyard winch. We would choose the optional aftleading halyards to facilitate shorthanded cruising.

The 25+ should sail with almost any other production cruiser-racer of her size. Her wide beam and deep draft should offset the additional heeling moment of the tall rig. Like all wide modern boats she should be sailed on her feet. Get the crew weight out on the weather rail in a breeze, and she should carry sail well.

Handling Under Power

There were probably more power options for the 25+ than any similar-sized boat on the market. They included: outboard power, OMC gas saildrive, Volvo diesel saildrive, and Yanmar diesel inboard.

The 25+ is small enough to be driven fairly well by a 10-hp outboard. There was about a $3,500 difference in equipping the boat with an outboard engine versus the diesel inboard. The choice depended largely on how the boat was to be used. Few boats of this size are used for long-distance cruising. For daysailing and racing, an outboard engine is more than adequate.

If extended coastal cruising is to be the boat’s primary activity, then one of the inboard options should be considered. Frankly, we have little love for saildrive installations. If you really want an inboard engine, the Yanmar single cylinder inboard diesel is the real choice. No matter which engine is in the boat, it is equipped with a 20-gallon aluminum fuel tank.

With a one-cylinder diesel engine, given a fourknot cruising speed and fuel consumption of about 1/4 gallon per hour, the range under power is almost 350 miles—a truly astounding range for a 25′ boat, That’s probably more range under power than the average boat is likely to need for an entire season.

Deck Layout

With shroud chainplates set well inboard, and a reasonably narrow cabin trunk, working on the deck of the 25+ is fairly easy. There is adequate room between the shrouds and the lifelines to walk outboard of the shrouds with ease.

There is a small foredeck anchor well, adequate for the stowage of a single Danforth and rode. There are no bow chocks, but there are two cleats located forward at the outboard edge of the deck.

Molded-in nonskid of a color contrasting to the primary deck color was standard on the Ericson. This relieves eyestrain in bright sunlight and reduces the basically austere external appearance of the boat.

The cockpit of the 25+ is comfortable. Coamings are angled outward rather than being vertical, allowing a more natural sitting posture. As in most tiller-steered boats, the sweep of the tiller occupies a large percentage of the cockpit volume. In port, the tiller swings up and out of the way, providing un-crowded seating for up to six adults.

A single cockpit scupper 1—1/ 2″ in diameter is recessed in a well at the back of the cockpit. The well allows water to drain on either tack. A stainless steel strainer over the scupper reduces its effective area by over 50%. Since the drain size is large enough to pass on through almost any debris that is likely to be found in the cockpit, we would remove the strainer for sailing. A single 1-1/2″ diameter scupper has more cross sectional area than two 1″ drains, and is less likely to clog.

There are two cockpit lockers. The starboard cockpit locker is a shallow pan suitable for storing small items such as winch handles and sail ties. At its after corner is a deeper bin which could make a handy icebox for cold drinks. The port locker is a large, deep affair which unfortunately suffers from the common failing of not being adequately separated from the under-cockpit area, A snap-in Dacron bag would convert this locker to reasonable sail stowage.

The companionway uses thick, well-made solid teak dropboards with proper step joints to prevent spray from working below, Unfortunately, the very strong taper to the companionway slides allows them to be removed by lifting less than an inch. For sailing in rough water, a positive means of securing these slides—a sliding bolt, for example—must be installed.

It is gratifying to see a real bridgedeck in a boat this size. Except for the strong taper to the companionway sides, this is one of the best designed cockpits we have seen in a small boat.

The amount of interior volume in the 25+ is truly remarkable. The boat easily has the headroom and elbow room of most older 30-footers.

The forepeak contains the usual V-berth with a filler to form a nominal double. We truly mean nominal. Two normal-sized people simply do not fit in the forward berth of the Ericson 25+. Consider it a large single instead, or a double for two children. Water and holding tanks occupy the space under the berth.

The 25+ has a genuine enclosed, standup head, an almost unheard of luxury in a boat this size. The head has an opening port for ventilation. There are two small lockers in the head, but both are largely occupied by plumbing hoses.

Opposite the head is a small hanging locker. This locker is fully lined with teak plywood, a nice finishing touch.

It is in the main cabin that the 25+ really shines. Headroom is an honest 6′. Two comfortable settee berths seat 6 in comfort, A fold-down drop-leaf table is big enough to serve 4, and is one of the sturdier tables of this type that we have seen.

The main cabin of the 25+ is well finished with a combination of off-white fiberglass and teak. This is a very successful decorating job, without so much teak as to turn the interior into a cave but with enough to give a well finished appearance. A ceiling of teak strips became standard later on in the production run, and the cabin trunk sides are veneered in teak. A teak and holly cabin sole came standard, with two access hatches to the bilge.

There is a real bilge, unusual in a boat of this size. The strainer for the cockpit-mounted Whale Gusher pump is accessible through a cabin sole hatch.

Under the settee on each side of the cabin there are storage bins. These make use of molded polyethylene drop-in liners, a most practical solution which recognizes the reality that under-seat storage is rarely, if ever, completely dry. An optional extension to the starboard settee converts it to a double berth, but at the expense of easy access to the storage bins underneath.

The galley is surprisingly complete for a 25′ boat. There is a well-insulated icebox of five cubic foot capacity. The insulation is exposed in the port cockpit locker, and will be vulnerable to damage from items stowed there. It could easily be sealed off with either plywood or fiberglass to protect it. The icebox lid is an uninsulated molding advertised as a removable serving tray. If it is used as a serving tray, then the icebox is uncovered, allowing the ice to melt. Whoever thought up that bright idea should go back to the drawing board or look around for some common sense.

For some reason, icebox lids are one of the poorest design features of most sailboats, It’s quite remarkable on boats with otherwise thoughtful design and construction to see poor icebox design. Perhaps there is collusion between the Union of Icebox Designers and the Association of Manufacturers of Ice to maximize the consumption of ice aboard sailboats.

There are storage lockers both above and below the icebox-stove counter. The stove is a recessed Kenyon two-burner alcohol unit with a cutting block cover, These stoves have the fuel fill located between the two burners, and we feel they are a poor choice for use aboard a boat. The burners must be absolutely cool before the fuel tank is filled to eliminate the possibility of explosion or fire.

It is not necessary to step on the galley counter when coming down the companionway. This is a real plus. Footprints on the counters have never appealed to us.

A human-sized quarterberth is a welcome feature. With adequate headroom over, it eliminates the coffinlike aura of so many small-boat quarterberths, and is without a doubt the roomiest, most comfortable berth on the boat.

With an outboard engine, the room under the cockpit that would normally house an inboard is given over to storage. The tiny one-cylinder Yanmar diesel would easily shoehorn into the same space.

Without a doubt, the interior of the Ericson 25+ is a real accomplishment, It is well finished, generally well designed, and remarkably roomy for a boat of this overall length. There is some miniaturization of components, such as the galley sink, head sink, and hanging locker. Nonetheless, she’s a big little boat, and would be truly comfortable for extended coastal cruising for a couple. That is something that can rarely be said for a 25′ boat.

Conclusions

Ericson came very close to achieving their goals in the 25+. She is about as much boat as can be crammed into this overall length.

An interesting option is an E-Z Loader trailer. With a beam of over 9′ and a weight of 5,000 pounds, the 25+ is no trailer sailer. It takes a large, powerful car or truck to tow a boat of this size, and the beam could present legal problems in some states. The trailer would be most useful for taking the boat home for winter storage, rather than frequent over-the-road transport.

Workmanship and finish detail are generally of good stock boat quality. Exposed joiner work is good. Fillet bonding varies from good to only fair, with glasswork generally good.

The Ericson 25+ is a good small cruiser for a young family, and offers enough sailing performance to be a reasonable choice for club racing.

Unlike many small cruiser-racers which concentrate on interior volume and forsake sailing ability, the 25+ really will sail. This means that the new sailor will not quickly outgrow her as he or she learns what makes a boat go fast. With good hardware such as Barient and Navtec and a fairly high degree of finish detail, it is easy to see why the boat fetches the prices it does.

For those used to less-expensive 25-footers, the cost will be a shock. It helps a little to think of her as a 28-footer with the stern cut off.

With an inboard diesel, a good light air rig, and lots of interior volume, she’s a good little cruising boat for a couple. A maximum boat for minimum length, she’s a modern solution to skyrocketing costs of sailing. At maximum price for her length when new, she’s not an example of “more for less,” but then, there’s no free lunch in the sailboat market. That’s for sure.

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

Island Packet 370: What You Should Know | Boat Review

How To Make Starlink Better On Your Boat | Interview

Catalina 380: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Ericson 25+

The Ericson 25+ is a popular sailboat that was produced from 1978 to 1984 by the Ericson Yachts company. It is a well-built, stable boat that can handle a variety of wind and sea conditions. The boat has a length overall of 25 feet and a beam of 9 feet, with a displacement of 5,000 pounds. It is typically equipped with a masthead rig and a fin keel, which makes it relatively fast and easy to handle. The interior of the boat is surprisingly spacious for its size, with a comfortable berth forward and a large, U-shaped dinette that converts into a double berth. There is also a small galley area with a sink and a two-burner stove, as well as a head compartment with a marine toilet.

One of the key features of the Ericson 25+ is its solid construction. The boat has a hand-laid fiberglass hull and deck, with a balsa core for added strength and insulation. The deck is also designed with a non-skid pattern for increased safety. The boat is well-suited for both day sailing and extended cruising, with ample storage space for provisions and gear. It is also relatively easy to maintain and repair, with many parts and accessories readily available. Overall, the Ericson 25+ is a classic sailboat that has stood the test of time and continues to be a popular choice for sailors of all skill levels.

LOA: 25.42 ft LWL: 21.83 ft Beam: 9.25 ft Draft: 4.92 ft Displacement: 5000.00 lbs Ballast: 2000.00 lbs Hull type: Fin w/spade rudder Hull construction: FG Rigging type: Fractional Sloop

Ericson 25+ for sale in the last 12 months

Below you'll find the latest Ericson 25+ listings for the last 12 months. We compare the listing price with boats listed in the past and the color coding indicates if the price is good (green = below the average listing price) or more on the expensive side (red = seller is asking more than the average listing price).

Ericson 25+ listing prices over time

Listing details.

Best Ericson Sailboats: A Complete Guide

Last Updated by

Daniel Wade

December 28, 2023

Sailboats that stand the test of time are often classics and loved by many sailors. One example is looking for the best Ericson sailboats, dating back to 1964.

Ericson had an up and down history but still managed to produce quality boats. So which ones were the best out of their lineup before their demise?

Out of the thousands of sailboats this company put together, there are a handful that stand out. The best Ericson sailboats consisted of the 26, 27, 29, 30, 32, 34, 35, 36C, E38, and 46 models. Each boat has a unique size and design, making them quite different from other brands at that time.

By 1999, the Ericson brand had been through enough over the years in terms of bankruptcy, ownership changes, and not keeping up with market demand by improving their boats. After poor sales that year, they decided to close shop for good, but still had plenty of produced sailboats to carry on the name.

According to experts in the sailing industry, Ericson sailboats were ahead of their time in the early 1970’s. They were a pioneer in the sailboat realm and built many classics that you can find for an affordable price today.

Table of contents

‍ Top 10 Ericson Sailboats

Through much debate, many sailors argue about which Ericson sailboat is the best. Many will claim a variety of factors influence trying to buy one today, such as price, condition, and size.

Depending on what suits your style of sailing and how you intend to use the boat will likely affect your decision on what is best. For Ericson, there are plenty of sizes and models to choose from.

1. Ericson 26

{{boat-info="/boats/ericson-26"}}

The 26 model offered a good size for sailors having a small crew or operating shorthanded with a fractional sloop. This one is just shy of 26 feet long and has about a five-foot draft. These were designed perfectly for day sailing or light cruising.

Bruce King helped develop this one, which turned out to be a stiff and fairly fast boat. Since it has self-tailing winches, and furling headsails, and you can control the mainsheet from the cockpit, it is easy to operate.

2. Ericson 27

{{boat-info="/boats/ericson-27"}}

The Ericson 27 debuted in 1971 with a displacement of 6,600 pounds and plenty of stability in the masthead sloop. The boat is roughly 27 feet long and sits about four feet in the water.

Many love this design since it navigated through choppy waters and responded to wind changes well. In addition, it can also sleep five comfortably.

There is enough sailing area to handle just about any condition and it is great for coastal cruising. If you have difficulty finding a crew or only want to be by yourself, this one makes it easy to handle all alone.

3. Ericson 29

{{boat-info="/boats/ericson-29"}}

Another masthead sloop rig type, the Ericson 29 is about 29 feet long with a draft of 4.33 feet. This one reached popularity among those that wanted to enjoy cruising and doing it at night.

There are sleeping accommodations for up to five people and plenty of room to move around. This design was similar to other popular models they produced, but not as easy to operate by yourself like the other shorter models.

4. Ericson 30

{{boat-info="/boats/ericson-30"}}

The Ericson 30 has an appeal like no other model in their lineup. They tweaked this design for about 10 years, making it one of the longer models they have played with.

It is nearly 30 feet long, has a fractional sloop, and sits nearly six feet in the water. It offers plenty of room to sleep five people and live aboard.

This is a great size to live on and learn about your boat without being too overwhelmed if you are new to that lifestyle. This one has become popular with sailors wanting to try that out.

5. Ericson 32

{{boat-info="/boats/ericson-32"}}

There were multiple designs of the Ericson 32 , with two of the most popular ones being designed by Bruce King in 1969 and 1985. The one in 1969 had a lot more problems, but they are both classics at 32 feet in length and a six-foot draft.

The later model was built for four years and they produced 700 of them. You will likely see many Ericson 32s with another number associated with it due to different features like the keel type or the optional tail rig.

Both the older and newer models of the 32s are attractive boats. If you are wanting the better of the two in terms of look, handle, and speed, you cannot go wrong with the latter model.

6. Ericson 34

{{boat-info="/boats/ericson-34"}}

The 34 footer installment was a good design with high-quality construction. This masthead sloop was nearly 35 feet and just over six feet of draft.

Depending on the year these were built, the exterior did not change that much in comparison to the interior. Out of all the boats that Ericson produced, they were most proud of the molding structure they used on this one.

The deck used a balsa core and had a plywood backing under the deck fittings to offer extra support. With the fiberglass hull, it provided one of the sturdiest options without compromising performance.

7. Ericson 35

{{boat-info="/boats/ericson-35"}}

The Ericson 35 was similar to the 34, with some slight differences. This one is nearly 36 feet and sits around 6.17 feet in the water.

This one was a good cruiser, with some models meant for casual sailing. It handled offshore sailing very well and had the classic look.

The interior made this boat easy to live on and accommodate over five people. Whether you are racing or living on it, this boat could do it all.

8. Ericson 36C

{{boat-info="/boats/ericson-36c"}}

The 36C was another beauty offered by Ericson, coming in at 36 feet and a five foot draft. This cutter rig is a great size, but you can still operate shorthanded if you do not have enough people on board.

This boat can do it all with coastal cruising, day sailing, and living full time on it. With its fiberglass hull, it is one of the lighter boats for its size. You could even race this if you wanted.

9. Ericson E38

{{boat-info="/boats/ericson-e38"}}

If you are looking for a larger Ericson boat, you cannot go wrong with the E38 . At nearly 38 feet long and 6.5 feet in the water, it offers the best of both worlds for living space and is easy to handle.

With the masthead sloop, you can expect top performance while cruising. This is another quality build that you can live aboard too.

10. Ericson 46

{{boat-info="/boats/ericson-46"}}

The largest boat that Ericson put together was the 46 , coming in just shy of 46 feet and about a seven-foot draft. With another masthead sloop design, you can rest assured the performance will be there.

There were actually two versions, one that is a racer and one that is a cruiser. Over a three-year period, only 20 of these were built. Depending on which one you find, there will be slight adjustments to the performance package.

Why Erickson Boats Are Popular

A lot of nautical miles have been made on Ericson boats over the years and for a good reason. They were quality boats that had a classic look, easy to handle, and were affordable.

Back in 1965, these were primarily cruising sailboats that later adapted to a hybrid of a family-oriented cruiser. Other models specifically included fin keels, excellent bustle, and spade rudders for better performance.

You will definitely find better modern boats that have more luxury, speed, and performance compared to something that was built in the 60s to the 80s. But for the price and nostalgia, it is hard to pass up a classic like Ericson.

What to Look for in Used Ericson Boats

As with any used boat, you need to thoroughly inspect it before trying to purchase one. This means going over the sails, mast, deck, engines, and anything else that catches your eye.

Potential Cracking

There have been some reports of very early models having cracks in the deck or mast. It is hard to blame them, since many boat designs have come a long way from over 40 years of being in the water. While very few have those reports, it is worth having it inspected by a professional before buying one.

Be Happy to Walk Away

Before committing to one, make sure that you know all of the histories before buying one. This will help you tremendously before you fall in love with its beauty.

Walking away and thinking it over for a few days can greatly help your buying process. You never know how urgent a seller might be, so you might end up getting a better deal on the price if you do decide to buy it after walking away.

Why an Ericson Sailboat Could Work for You

Ericson sailboats were unique luxury yachts that were built for speed. In addition, they had enough luxury on the inside that you could spend days or live on them for a period of time.

You typically can find one for a good price, which is why they are popular compared to other boats. With similar comparisons to other top-of-the-line sailboats, they make for a competitive option.

Luxury and Price

For those that want to buy an Ericson, they are all about luxury and performance for a good price . Since most models are over 40 years old, they are reasonably priced.

Depending on the size and model, almost all of the Ericson sailboats can be found within any budget. If you have experience fixing up boats, an Ericson can be worth its weight in gold.

Living Space

Customers that typically want an Ericson enjoy the amount of living space that it offers. On top of that, it provides the speed of comparable racers or cruisers that you will find today.

If you want a boat that allows you to live on to your own standards or race as you like, Ericson boats are the way to go. They offer the perfect blend of performance and comfort.

Stiff Builds

Ericson sailboats were strongly built and have a stiff feel to them. If a stiff boat is something you are after, the Ericson models are a good fit.

This means they have a different feel when sailing. If you were to buy one, it might take some getting used to if you have only handled newer boats.

Since Ericson boats have limited builds for each year that they were produced, you likely will not see them that often. They offer a nostalgic and classic look that only a few boats provide.

This creates a sense of urgency when buying. It is important to proceed with caution and check out the boat properly before you decide to jump on one.

The Rise and Fall of Ericson

Ericson was founded in 1963 and had a few molds to base designs of boats on to get started. After about a year and a half of poor production, they filed for bankruptcy since they were not hitting the mark with customers on their designs.

They were purchased in 1965 by Mark Pitman and Del Walton, who also hired Bruce King to begin designing their lineups. King is responsible for many of the best boats offered by Ericson, who even fine tuned some of his own creations a few years later.

Later in 1968, Pacific American Industries bought out Ericson and continued to produce similar models. CML group later purchased the brand and operated from 1971 to 1984.

Pacific Seacraft later bought the molds for various models, like Ericson 34 and 38 to move on with production. The brand continued to move forward with the same old designs without many changes.

Since the brand never pushed to market its products and management was lazy in trying to think of what the market wanted, sales dipped in the late 1990s. They never went boating shows or much of anything to promote their lineup. This caused Ericson to shut down for good.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Best Bluewater Sailboats Under $50K

Best Blue Water Sailboats Under 40 Feet

Which Sailboats Have Lead Keels?

June 20, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

Sailboat Data Sheets

Sailboat steering parts by boat.

For quick search use the Find Function

(Control+F on PC, or Command+F on a Mac)

Edson's Steering Data Sheets are available for over 2500 boats and include a simple steering layout drawing and parts list. Simply download the PDF for your boat to find the replacement parts that you need. If you need specific internal pedestal parts such as bearings, shaft, washers, etc. refer to our  Pedestal Replacement Parts  page.

Below are several of the most requested Steering Data Sheets. Click on the Data Sheet listed next to the boat type to download a PDF. If your boat is not listed, please fill out the Contact Us form specifying your boats make, model, and year in the details section. To order replacement parts visit Edson's Products  or call Edson Customer Service at 508-995-9711 .

Boat  Manufacturers  Starting With - A

  Boat  Manufacturers  Starting With - B

Boat  Manufacturers  Starting With - C

Boat  Manufacturers  Starting With - D

Boat  Manufacturers  Starting With - E

Boat  Manufacturers  Starting With - F

Boat  Manufacturers  Starting With - G

Boat  Manufacturers  Starting With - H

  Boat  Manufacturers  Starting With - I

Boat  Manufacturers  Starting With - J

Boat  Manufacturers  Starting With - K

Boat  Manufacturers  Starting With - L

Boat  Manufacturers  Starting With - M

Boat  Manufacturers  Starting With - N

Boat  Manufacturers  Starting With - O

Boat  Manufacturers  Starting With - P

Boat  Manufacturers  Starting With - R

Boat  Manufacturers  Starting With - S

Boat  Manufacturers  Starting With - T

Boat  Manufacturers  Starting With - U

Boat  Manufacturers  Starting With - V

Boat  Manufacturers  Starting With - W

AVSIM Library System Version 2.00 -- 2004-May-01 © 2001-2024 AVSIM Online All Rights Reserved

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Ericson 25+

Ericson 25+ is a 25 ′ 5 ″ / 7.8 m monohull sailboat designed by Bruce King and built by Ericson Yachts between 1978 and 1984.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Shoal draft: 3.92’/1.19m

Embed this page on your own website by copying and pasting this code.

Discover Related Sailboats

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The Ericson 36 is a 35.58ft masthead sloop designed by Ron Holland and built in fiberglass by Ericson Yachts (USA) between 1980 and 1984.

32 units have been built..

The Ericson 36 is a moderate weight sailboat which is a good performer. It is very stable / stiff and has a low righting capability if capsized. It is best suited as a coastal cruiser. The fuel capacity is average. There is a short water supply range.

Ericson 36 for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data, other photos.

Modal Title

The content of your modal.

Personalize your sailboat data sheet

• Election 2024
• Entertainment
• Newsletters
• Photography
• AP Buyline Personal Finance
• Press Releases
• Israel-Hamas War
• Russia-Ukraine War
• Global elections
• Asia Pacific
• Latin America
• Middle East
• March Madness
• AP Top 25 Poll
• Movie reviews
• Book reviews
• Personal finance
• Financial Markets
• Business Highlights
• Financial wellness
• Artificial Intelligence
• Social Media

Inside Russia’s penal colonies: A look at life for political prisoners caught in Putin’s crackdowns

FILE In this file photo made from video provided by the Moscow City Court on Feb. 3, 2021, Russian opposition leader Alexei Navalny makes a heart gesture standing in a cage during a hearing to a motion from the Russian prison service to convert the suspended sentence of Navalny from the 2014 criminal conviction into a real prison term in the Moscow City Court in Moscow, Russia. Navalny, President Vladimir Putin’s fiercest foe, has become Russia’s most famous political prisoner. He is serving a nine-year term due to end in 2030 on charges widely seen as trumped up, and is facing another trial on new charges that could keep him locked up for another two decades. (Moscow City Court via AP, File)

FILE Russian opposition leader Alexei Navalny looks at photographers standing behind a glass of the cage in the Babuskinsky District Court in Moscow, Russia, on Feb. 20, 2021. Navalny, President Vladimir Putin’s fiercest foe, has become Russia’s most famous political prisoner. He is serving a nine-year term due to end in 2030 on charges widely seen as trumped up, and is facing another trial on new charges that could keep him locked up for another two decades. (AP Photo/Alexander Zemlianichenko, File)

FILE - Detained protesters are escorted by police during a protest against the jailing of opposition leader Alexei Navalny in St. Petersburg, Russia, on Jan. 31, 2021. Memorial, Russia’s oldest and most prominent human rights organization and a 2022 Nobel Peace Prize laureate, counted 558 political prisoners in the country as of April -- more than three times higher than in 2018, when it listed 183. (AP Photo, File)

FILE - Opposition leader Alexey Navalny, speaks with riot police officers blocking the way during a protest rally against Prime Minister Vladimir Putin’s rule in St. Petersburg, Russia, on Feb. 25, 2012. Navalny, President Vladimir Putin’s fiercest foe, has become Russia’s most famous political prisoner. He is serving a nine-year term due to end in 2030 on charges widely seen as trumped up, and is facing another trial on new charges that could keep him locked up for another two decades. (AP Photo, File)

FILE - Police block a protest against the jailing of opposition leader Alexei Navalny in Yekaterinburg, Russia, on Jan. 23, 2021. Memorial, Russia’s oldest and most prominent human rights organization and a 2022 Nobel Peace Prize laureate, counted 558 political prisoners in the country as of April -- more than three times higher than in 2018, when it listed 183. (AP Photo, file)

FILE Sasha Skochilenko, a 32-year-old artist and musician, stands in a defendant’s cage in a courtroom during a hearing in the Vasileostrovsky district court in St. Petersburg, Russia, on April 13, 2022. Skochilenko is in detention amid her ongoing trial following her April 2022 arrest in St. Petersburg on the charges of spreading false information about the army. She has spent over a year behind bars. (AP Photo, File)

FILE - Russian opposition activist Vladimir Kara-Murza is escorted to a hearing in a court in Moscow, Russia, Feb. 8, 2023. Kara-Murza, another top Russian opposition figure, was sentenced last month to 25 years on treason charges. (AP Photo, File)

FILE In this handout photo released by the Moscow City Court, Russian opposition activist Vladimir Kara-Murza stands in a glass cage in a courtroom at the Moscow City Court in Moscow, on April 17, 2023. Kara-Murza, another top Russian opposition figure, was sentenced last month to 25 years on treason charges. (The Moscow City Court via AP, File)

FILE - Alexei Gorinov holds a sign “I am against the war” standing in a cage during hearing in the courtroom in Moscow, Russia, on June 21, 2022. Gorinov, a former member of a Moscow municipal council, was convicted of “spreading false information” about the army in July over antiwar remarks he made at a council session. Criticism of the invasion was criminalized a few months earlier, and Gorinov, 61, became the first Russian sent to prison for it, receiving seven years. (AP Photo, File)

FILE - Andrei Pivovarov, former head of Open Russia movement stands behind the glass during a court session in Krasnodar, Russia, on June 2, 2021. Pivovarov, an opposition figure sentenced last year to four years in prison, has been in isolation at Penal Colony No. 7 in northern Russia’s Karelia region since January and is likely to stay there the rest of this year. (AP Photo, File)

FILE - Andrei Pivovarov, former head of Open Russia movement, speaks with media in Moscow, Russia, on July 9, 2020. Pivovarov, an opposition figure sentenced last year to four years in prison, has been in isolation at Penal Colony No. 7 in northern Russia’s Karelia region since January and is likely to stay there the rest of this year. (AP Photo/Denis Kaminev, File)

FILE - Riot police detain two young men at a demonstration in Moscow, Russia, on Sept. 21, 2022. Memorial, Russia’s oldest and most prominent human rights organization and a 2022 Nobel Peace Prize laureate, counted 558 political prisoners in the country as of April -- more than three times higher than in 2018, when it listed 183. (AP Photo, File)

• Copy Link copied

TALLINN, Estonia (AP) — When Alexei Navalny turns 47 on Sunday, he’ll wake up in a bare concrete cell with hardly any natural light.

He won’t be able to see or talk to any of his loved ones. Phone calls and visits are banned for those in “punishment isolation” cells, a 2-by-3-meter (6 1/2-by-10-foot) space. Guards usually blast patriotic songs and speeches by President Vladimir Putin at him.

“Guess who is the champion of listening to Putin’s speeches? Who listens to them for hours and falls asleep to them?” Navalny said recently in a typically sardonic social media post via his attorneys from Penal Colony No. 6 in the Vladimir region east of Moscow.

He is serving a nine-year term due to end in 2030 on charges widely seen as trumped up, and is facing another trial on new charges that could keep him locked up for another two decades. Rallies have been called for Sunday in Russia to support him.

Navalny has become Russia’s most famous political prisoner — and not just because of his prominence as Putin’s fiercest political foe, his poisoning that he blames on the Kremlin, and his being the subject of an Oscar-winning documentary.

He has chronicled his arbitrary placement in isolation, where he has spent almost six months. He’s on a meager prison diet, restricted on how much time he can spend writing letters and forced at times to live with a cellmate with poor personal hygiene, making life even more miserable.

Most of the attention goes to Navalny and other high-profile figures like Vladimir Kara-Murza , who was sentenced last month to 25 years on treason charges. But there’s a growing number of less-famous prisoners who are serving time in similarly harsh conditions.

Memorial, Russia’s oldest and most prominent human rights organization and a 2022 Nobel Peace Prize laureate, counted 558 political prisoners in the country as of April — more than three times the figure than in 2018, when it listed 183.

The Soviet Union’s far-flung gulag system of prison camps provided inmate labor to develop industries such as mining and logging. While conditions vary among modern-day penal colonies , Russian law still permits prisoners to work on jobs like sewing uniforms for soldiers.

In a 2021 report, the U.S. State Department said conditions in Russian prisons and detention centers “were often harsh and life threatening. Overcrowding, abuse by guards and inmates, limited access to health care, food shortages and inadequate sanitation were common in prisons, penal colonies, and other detention facilities.”

Andrei Pivovarov , an opposition figure sentenced last year to four years in prison, has been in isolation at Penal Colony No. 7 in northern Russia’s Karelia region since January and is likely to stay there the rest of this year, said his partner, Tatyana Usmanova. The institution is notorious for its harsh conditions and reports of torture.

The 41-year-old former head of the pro-democracy group Open Russia spends his days alone in a small cell in a “strict detention” unit, and is not allowed any calls or visits from anyone but his lawyers, Usmanova told The Associated Press. He can get one book from the prison library, can write letters for several hours a day and is permitted 90 minutes outdoors, she said.

Other inmates are prohibited from making eye contact with Pivovarov in the corridors, contributing to his “maximum isolation,” she said.

“It wasn’t enough to sentence him to a real prison term. They are also trying to ruin his life there,” Usmanova added.

Pivovarov was pulled off a Warsaw-bound flight just before takeoff from St. Petersburg in May 2021 and taken to the southern city of Krasnodar. Authorities accused him of engaging with an “undesirable” organization -– a crime since 2015.

Several days before his arrest, Open Russia had disbanded after getting the “undesirable” label.

After his trial in Krasnodar, the St. Petersburg native was convicted and sentenced in July, when Russia’s war in Ukraine and Putin’s sweeping crackdown on dissent were in full swing.

He told AP in a letter from Krasnodar in December that authorities moved him there “to hide me farther away” from his hometown and Moscow. That interview was one of the last Pivovarov was able to give, describing prison life there as “boring and depressing,” with his only diversion being an hour-long walk in a small yard. “Lucky” inmates with cash in their accounts can shop at a prison store once a week for 10 minutes but otherwise must stay in their cells, he wrote.

Letters from supporters lift his spirits, he said. Many people wrote that they used to be uninterested in Russian politics, according to Pivovarov, and “only now are starting to see clearly.”

Now, any letters take weeks to arrive, Usmanova said.

Conditions are easier for some less-famous political prisoners like Alexei Gorinov , a former member of a Moscow municipal council. He was was convicted of “spreading false information” about the army in July over antiwar remarks he made at a council session.

Criticism of the invasion was criminalized a few months earlier, and Gorinov, 61, became the first Russian sent to prison for it, receiving seven years.

He is housed in barracks with about 50 others in his unit at Penal Colony No. 2 in the Vladimir region, Gorinov said in written answers passed to AP in March.

The long sentence for a low-profile activist shocked many, and Gorinov said “authorities needed an example they could showcase to others (of) an ordinary person, rather than a public figure.”

Inmates in his unit can watch TV, and play chess, backgammon or table tennis. There’s a small kitchen to brew tea or coffee between meals, and they can have food from personal supplies.

But Gorinov said prison officials still carry out “enhanced control” of the unit, and he and two other inmates get special checks every two hours, since they’ve been labeled “prone to escape.”

There is little medical help, he said.

“Right now, I’m not feeling all that well, as I can’t recover from bronchitis,” he said, adding that he needed treatment for pneumonia last winter at another prison’s hospital ward, because at Penal Colony No. 2, the most they can do is “break a fever.”

Also suffering health problems is artist and musician Sasha Skochilenko, who is detained amid her ongoing trial following her April 2022 arrest in St. Petersburg, also on charges of spreading false information about the army. Her crime was replacing supermarket price tags with antiwar slogans in protest.

Skochilenko has a congenital heart defect and celiac disease, requiring a gluten-free diet. She gets food parcels weekly, but there is a weight limit, and the 32-year-old can’t eat “half the things they give her there,” said her partner, Sophia Subbotina.

There’s a stark difference between detention facilities for women and men, and Skochilenko has it easier in some ways than male prisoners, Subbotina said.

“Oddly enough, the staff are mostly nice. Mostly they are women, they are quite friendly, they will give helpful tips and they have a very good attitude toward Sasha,” Subbotina told AP by phone.

“Often they support Sasha, they tell her: ‘You will definitely get out of here soon, this is so unfair here.’ They know about our relationship and they are fine with it. They’re very humane,” she said.

There’s no political propaganda in the jail and dance music blares from a radio. Cooking shows play on TV. Skochilenko “wouldn’t watch them in normal life, but in jail, it’s a distraction,” Subbotina said.

She recently arranged for an outside cardiologist to examine Skochilneko and since March has been allowed to visit her twice a month.

Subbotina gets emotional when she recalled their first visit.

“It is a complex and weird feeling when you’ve been living with a person. Sasha and I have been together for over six years — waking up with them, falling asleep with them — then not being able to see them for a year,” she said. “I was nervous when I went to visit her. I didn’t know what I would say to Sasha, but in the end, it went really well.”

Still, Subbotina said a year behind bars has been hard on Skochilenko. The trial is moving slowly, unlike usually swift proceedings for high-profile political activists, with guilty verdicts almost a certainty.

Skochilenko faces up to 10 years if convicted.